ocdairgunner said:

I used the following video for timing. Again it does not go into too much detail about how forward it should be. But I followed it pretty closely and it took care of my timing issues/fps drop from my initial tests.

Click to expand...

Me, too! One other issue to consider is the hammer spring adjuster screw- the one that attaches the wheel to the gun body. It has periodically loosened which can cause some shots to be much slower. Happened to me several times.

very clear @ 24x
just search Ebay for

WESTHUNTER HD GEN2 6-24X50 FFP​

Thanks for the report and pictures. Also, thanks for hosting.

Looking for FX hybrids .25 cal. Let me know what you have. Thanks

This listing has been renewed

Just a update after paying closer attention to what's going on here....it's the anti bear trap engaging that feels grindy to me...I'll have to pop her out of the stock and put a little moly paste in that area. The model 460 appears to have the same bear trap on it also.

Looking for a 500mm or 600mm barrel liner and shroud for 25cal

This listing has been renewed

zx10wall said:

Randy, I’m giving you a hard time bud. Don’t take my joshing as being ugly please. We all know Caleb wields a Daystate Red Wolf in a custom battle worn orange finish. He shoots those 34gr at a blistering 975 fps or there about.

Love your pictures and a lot of those gents too that I’ve had the pleasure of shooting with. That Rick is a true gem The targets y’all use are awesome. I’m gonna make a trip up there to do an Extreme FT with y’all this year. Thanks for sharing.

Click to expand...

Hi Derrick
I did not take it that way at all!! I laughed at what you said about Caleb using 10.34s. I also laughed at what I put down, or how it even got there for his pellet choice lol. .
We would love to have you shoot with us, come on up!
I agree with you about Rick, he even showed up at 7:30am to help us set up the range!! And he is not that close to us, long drive. Great GUY!!

Nice! Looking forward to seeing the stock completed! It's a very good day when you find out your barrel likes....SLUGS!

This listing has been renewed

Flyingsherpa said:

I was looking at the Tuxing 032. What is the max recommended bottle size?

Click to expand...

I'm running a 74cf tank, thinking of adding a 100. The 74 takes about 20 min or so from 3000psi to 4500psi. I use Seco Lube, but any high quality compressor oil will do, except for Royal Purple for me it smoked like crazy. Some recommend running pure water wetter (citation needed) I just run 50/50 water/coolant. Even though I'm in a low humidity state I'm not worried too much about water in the air but....I added a Tuxing Molecular Sieve. Beware the two filters on the compressor must be welded closed, a few of us have had issues taking them apart. I've yet to get mine apart, I need a bigger hammer....not joking there darn things are TIGHT. I bleed out the moisture from the #1 filter about ever 5 - 7 min, I've the the auto shut off. I had the electronic control go out right off the bat, lots of fun changing it out with the replacement but since then 1.5 years it's been fine. There is a Tuxing thread here somewhere.

This listing has been renewed

Derrick did wonders for my Uragan .25 and as @pesty3782 said, he knows his way around triggers. He has it shooting JSB 33.95g lights out. I can't recommend him enough!

YetiusAmericanus said:

Looking for installation instructions for the PROD bullpup stock made by Rapid70. Anyone have a set they could share?

Click to expand...

If you PM me your email address I should be able to forward the instructions.

What a great time to be airguning

4 rifles I’d buy if they were on sale today.

Stoeger Scout

MacCavity MA2
Umarex ZelosKarma EQ


What do you guys think ?
I’m loving this market. Cool stuff well equipped at what I think is great pricing.

I’m really wanting the Scout but I’d have to decide after all are available and tested by members not sponsored memebers.

Treefrog said:

Sweet! That's Kurt Russel, too!

I never did get that Johnny-Seven that I wanted...

Cheers,

J~

Click to expand...

Hey, I got a Johnny Seven for Christmas when I was a kid (early 1960s).

This listing has been renewed

Bob's guides are excellent:

The one specific to regulated PCPs is

This is a very nice well made bag with a plastic cup in the bottom so you can stand your tank on end as well as rubber feet on the side so you can lay it down. It also has two detachable pouches on the side. I only took it out of the box to see if it would fit my 9L tank. It says it will fit a 9L tank but it doesn’t. That’s the only reason I’m selling it. $130 shipped.

Uh, the improvement question. There are two equations to think of; what you can do to get better groupings and what can be done to your "gun" to get better groupings. As said for your gun, to feed the right projectile and a consistent means of delivery. I am of thought that most air guns will be able to outshoot most shooters. Just say this is a 2 part question.The answer to both questions in one word is consistency.

Do you have a 500mm .22 FX liner sitting around that needs a new home?

I am evaluating a kit that requires an FX liner 500mm long, you would be helping me and the entire world if you were willing to sell me yours!

Dave

This listing has been renewed