I was quite surprised how popular these Snowpeak M60B pcp are. I didn't even know anything about this PCP 2 months ago until Wes of AirGunArcheryFun asked me to review it. I am glad I did because it turns out to be a great shooter with the right ammo.

This gun looks similar to my FX Impact MK2. Obviously it does not have the built quality and tunability of the Impact, but this affordability of this PCP is hard to ignore especially after I found out the amazing accuracy that it can do at 50 and even 75 yards. I was able to hit a very tight 5 shots group (8.74mm) with the NSA 17.5gr slugs with the factory setting of REG/HS. Maybe I got lucky. I have tried 100 yards but the results were not as good as I had hoped for. However, it showed potential as my tests were done in a windy condition. As you all know how challenging it is to shoot in the wind with any guns.

Anyway, I thought I would share a video on some of the MODs I did with this PCP and hopefully some of you will find them useful.

For starter, I cleaned the barrel throughly then I added 3M carbon fibre wrap to the barrel shroud and the cheek rest. I did some minor adjustment to shorten the trigger pull to my liking.

The mod that was worth mentioning is the bipod extension rail that I put together. I couldn't find anything online except the Sable Tactical rail but I didn't want to pay for the price. So I searched online for alternatives and I saw the 230mm picatinny rails and a couple of rifle mounts that I thought could work. Luckily they worked perfectly with some minor modification.

I grinned off the last nob on the rail and tight fitted the rifle mount into it. I made sure it was a tight fit, so it would hold together better. Now I have a $30-40 bipod extension rail that works and looks perfect with this M60B.

Enjoy.

Hello and welcome

Hey Green,
If I were in your situation, I would screw the gauge into receiver until it hits the regulator. See how many threads on the gauge go in.
If you can't get 5 threads in the receiver before it hits the regulator, I wouldn't do it.

If it won't go in far enough:
- grind the tip off the gauge .............. unless it will ruin the gauge.
- buy a 1/4" BSP female/male coupler so the gauge looks similar pic above by Sell682.

For sale is a Side Shot scope cam. For 30mm scopes. $100 Shipped. PPFF or G&S you pay fees Fits 30mm scope tubes. $100 shipped PPFF or G&S you pay fees.

For sale Kraford and Lypt gravity rail for FX Impact. Used but in good condition. $50 shipped. PPFF or G&S you pay fees.

Congratulations!

Air Arms TX 200 .177. Mklll in LP TAC2 stock. Unmolested w/cocking assist. Not shot much. Turns out I’m not a springer kind of guy. It does have a mar in the bluing on the left side of the barrel. Shown in pictures.
$1000 or reasonable offer. Includes shipping in conus. I “think” it shoots about 14 ft/lb. Haven’t shot enough to really know. I can chrono it if necessary


Thanks,
Ken

This listing has been renewed

On further research of this scope I found what I believe are Beeman mounts #5085 in the 1980 catalog. I have never seen mounts like these. From what I can find out they were manufactured in Germany

This listing has been renewed

maxtrouble said:

Yes, Gina juices and the UCC Kona coffee cans are made of good ole' steel. They both are sold in a little Asian market by my house. Pocky cookies are another favorite of mine but they make horrible targets. Smoked octopus is another favorite, yum.

Click to expand...

I've never smoked an octopus, but I hear puffer fish liver can get you HI

wsjones said:

Man, I love that stock! Amazed that so little inletting is required to make rhe 3622 components fit.

Question about the Gen 1 Marauder trigger: OEM or aftermarket? If aftermarket, from whom?

Click to expand...

It's a direct unit from crosman.

It seems that since the owner passed on the business a few years back it has not been quite the same since. Something else to ponder is that quality control there is getting a bad rap from a few bad instances, given the volume of production they put out.

There are a tons of way to have back yard friendly pcp, one I personally like is the Benjamin akela outta the box was quiet, inexpensive and accurate, However there are so many combinations of ways to achieve this there is no right or wrong answers just preference and budget.

The gun was my Chaipan P15 .25 shooting a 32gr AVS slug.

Excellent condition, .177 cal. couple very minor handling marks in stock( not scratches!), everything original from Martin as purchased new from him.

Accurate as you know these guns to be I used for 25m USARB matches and did very, very well.

Gun only! This version is the BM action with Titanium air receiver and barrel shroud (no longer made!) PM for further details, $1550.00 PayPal, conus. Will ship double boxed.

This listing has been renewed

Great find, thanks!

Just use your imagination, draw quickly in your mind...

Let the force be with you.

This listing has been renewed

Wanted RWS DIANA 34 black plastic butt plate / TO6 let me know what you have , maybe a broken stock you would strip the butt plate off of.
See pictures , this one I made a white line spacer for Thank You !!

I recognize that tank Jim !

Hi guys,

I have the V2 valve with the steel end and changed the valve o-rings and the reg o-rings. I bottomed in the adjustment screw all the way in., and loosened it slowly until it let air in and leaked thru the barrel.

The gun was performing well at 160 bar until the reg leaked from the 'nipple'. When I inspected the o-ring at the nipple, it was blown up. But I replaced every o-rings in the regulator and the valve o-rings.

I used those two videos to disassemble the gun and replace the valve o-rings.

I think over adjusting out the reg adjustment screw should not cause any leak, the air at whatever pressure from the bottle would just pass thru the reg and it would behave as if it's unregulated. The o-rings on the valve looked fine to me but I replaced them anyway.

It's a mystery to me.

Barnamwam said:

I also had a valve fail on my P2. The symptoms were similar to yours. Rok sent me a new one, I replaced it following Gregor K's video on Prophet 2 disassembly/reassembly:

and am in the process of tuning the hammer spring/regulator pressure balance to attain a particular velocity.

I also had the regulator leak around the protruding pin. I rebuilt it following this video:

The gun shoots well and holds air. Probably my favorite PCP.

Mike

Click to expand...

Looking for the “standard” not compact version in .25 cal
New or like new perfect condition. Cash FTF preferred. Between Phoenix & Tucson or in the Arizona area.
Have a couple PCP rifles for trading options as well.
Thx

Perhaps changing the thread title to "who printed these moderators?" might gain more attention?