STILL CLEANING OUT MY SAFE.

$350

These have been one of my favorites for a while.
After reading a review years ago by Percula, I decided it was going to be my first upgrade on optics.
Percula gave the Sidewinder winner status against the Sightron SIII 10-50x56 that so many people love.
Back then these were $800-900 street price.

The Hawke 1050X60 ED Sidewinder is a good scope.
Very Bright!
Good resolution for a high magnification scope. It matches my Golden Eagles on resolution. That surprised me when a friend and i did comparisons this weekend.
Contrast is where the Golden Eagle will win. But hey they are now listing for $2799!

This is a good scope at a great price. I currently have 2 and only need one.

This one has the end caps and 3" sunshade.
It comes with 1/4 MOA turrets, if you prefer 1/8 you can find them on Ebay, I did on my other one.

This one is not quite as clean as my other one, I bought this one about a year ago used and the previous
owner is not a meticulous as I am.
There is wear on the turrets and this does not have the large Parallax wheel or the original box.
But it functions beautifully and just came off of my 25 meter competition gun.

This listing has been renewed

Hi Guys,

Do you need an inexpensive high magnification scope?
This is an Aeon 10-40x 56.
It is my first high magnification scope that I had bought years ago.
I am cleaning out the safe and have upgraded over the years so this should find someone that could use it.

It is a decent scope but wont set the world on fire for image quality.
Think of it as a High Mag UTG scope.


But it served me well when I started shooting bench rest.
It is a moa style reticle and works well for this.

No caps, but has sunshade.

$75

This listing has been renewed

This listing has been renewed

Chiral said:

I'm interested to hear more about this design. Is there a design file for the shroud insert? Are you still considering selling the now shortened Notos? I think that shorty would be a blast for kids with the stock attached! I'm a couple days from being able to send/receive PMs (still too new), but if you're willing to post more about this in the thread, I'd appreciate it. And thanks for sharing!

Click to expand...

I sent you a PM, hopefully you can reply and we can talk and share.
Mark

There's a screw and a locating pin holding it on. The screw has blue loctite on it.

The American Air Arms tag threw me off. Took me a minute to understand. I thought Tom may have put out a springer or something.

new part for 25 cal fits taplon p regulat talon p not the new carben style

That’s clean! Nice!

I need a shorty too! But I’m in the EU No one here creates a shorty..

This listing has been renewed

markhooper said:

what is hard about machining titanium? as I remember it was soft similar to aluminum.. but I remember it is hard to weld.
Mark

Click to expand...

Titanium is extremely poor at transferring heat, so the heat builds up very quickly and will ruin the part or the tooling unless lots of coolant is used and proper feed rates. It is harder and tougher than some steels, but not quite as hard/tough as many stainless steels. It is in a different universe than aluminum when it comes to machining. Aluminum is among the easiest metal to machine and can even be cut with wood working tools in a pinch.

And Ti is indeed also quite difficult to weld since it becomes very reactive when heated to welding temps, and also due to the poor heat dissipation mentioned above. It often needs to be welded inside of purge gas chambers, but it can be done normally if great care is taken to shield the weld areas on both sides.

MACTEN said:

FX are 1/8 bspp or G 1/8 The Orc air is 1/8 bspp. Unless they began making the M8 as well.

Click to expand...

Old thread but happened to see it. Orcair does make an M8...at least now not sure when this thread was fresh. It's on Airguns of Arizonas website for under 50$ I think. It's cr2032 operated tho. Honestly I could care less about that versus rechargeable but I read somewhere that you have to degas the gun and pull the gauge off to change the battery....??...and I'm not into all that but that may be false also I don't know

Sunnyvale N50 schedule for 2024. Subject to changes for weather or other reasons.

The classic Leshiy is small, lightweight, and virtually indestructible. This has a custom hammer spring with a PEEK preload bushing that gives it a huge range in power and efficiency. Huma regulated. I have (3) Leshiy's already, so this one can go.

Included:

• Original Leshiy (very few marks)
• 350mm LW 9mm/.357 barrel
• 250mm LW .22 barrel
• Factory baffle with a custom marine brass bore reducer (.22)
• DonnyFL 1/2-20 moderator adapter kit
• RARE auxiliary air cylinder made by John Hagan (I think it's 1 of 5 total made)
• Shroud extender
• DonnyFL Baffle inset
• Spare valve
• Custom hammer spring and PEEK preload bushing
• Upgraded Wiki manometer / air cylinder gauge (300bar)

Terms:

• No trades. Not offering any of the accessories until the Leshiy has sold
• $1425 shipped for everything
• $1100 for Leshiy + 350mm 9mm barrel, DonnyFL 1/2-20 adapter + 1/2 shipping
• $950 for Leshiy + 250mm, Huma regulator, and spare valve + 1/2 shipping

This listing has been renewed

If you want accuracy the rule of thumb is somewhere between 820 - 910 fps or thereabouts.
If you want to see how fast you can shoot them? We will wait for you to answer that question.

This listing has been renewed

I recommend Baker Airguns as well. Very helpful there.

Excellent shot and video with the Zulus!

Leupold pig plex scope with rings rings and level mounted but never used NEW condition just sat in safe .
price $200 paypal F&F shipped to your door
add $15 if you want swfa bubble level 15 if you want swfa bubble level

This listing has been renewed

Over time the cocking block on my FX Impact M3 has worn off the black finish on my barrel. Also, pulling my barrel in and out of the gun has left superficial marks and scratches. Is there a way to touch up or refinish the barrel back to it’s glossy black glory? I’ve thought about using a bluing chemical like Brownell’s 44/40 or Birchwood Super Blue, but I believe those only work on carbon steel. I’m pretty sure the FX Impact barrels are stainless steel.

Let me know if you have any suggestions, thanks

I had one of those wake up calls when I was filling my HW44, failed to have the fill probe seated properly.

AirMaks arms padded gun case in great condition.
32 inches by 11 inches
$50 Shipped TYD