gdc999 said:

If I understand correctly, the O-rings go on the barrel then, the sleave goes over the O-rings. I would be curiosity to know how it shoots if you just put the O-rings on the barrel and leave the shroud off. The O-rings might be acting to change the harmonics like the old "decelerator" donut was supposed to do.

Click to expand...

Correct, the o rings slide onto the barrel (about 6 if i recall correctly) then i slid the CF tube over top. When i removed the tube a few times to check with and without the tube, i left the orings in place on the barrel. Even with the orings in place (and no tube) the groups still opened up to the original size. (Without orings and tube.)

I have a like new FX 600mm carbon sleeve for .22 cal. that I'd like to trade for a 700mm carbon sleeve for .30 cal. Only within the first 48 states please.

Today is the end of the First Week of ownership. Thursday I received some JTS 18."sumthins" in the Mail. This rifle appears to be taking a liking to them! Just loading them, the feel told Me these would be more consistent than the Crossman H/P's and the Daisy HP's "only ones available". lol I finally have a group worth showing. Litte Breeze, Sunny Day, and 30 Yards. I tell ya, learning to shoot a Break Barrel is a whole New Animal! Bottom hole was just a quick warm up. The next 5 were the JTS they grouped well for Me! I better order more! lol

Hello AGN,

Selling my FX Impact M3 Compact .30 in perfect condition.

- Element Helix 6-24x50 FFP scope
- FX No Limit Rings
- Vortex Bubble Leveler
- Donny Fl compensator
- 4 cans of JSB Exact Diablo pellets
- 1 box of FX Hybrid Slugs
- OG hardcase
- 1 magazine
- low shot count
- inspected and tuned by Utah Air Guns earlier this year / still under warranty.

$2050 Shipped / or pick up in Ventura, Ca

Pea-shooter O.G. said:

No laws have changed. If I remember correctly, I think there was concern about discussions of DIY moderators and thread adapter size that skirted close to questionable territory. I think to keep this site and the community off any radars, the rule of discussion of such topics came about.

Click to expand...

Gotcha, thanks for the explanation

Moved to Air Pistols. Moderator, please delete thread.

Anyone get the new SL model in .22 or .25?
Haven't seen any reviews on these but I honestly believe I can get much more "in depth" info here.
Got my G2 .25 in February and loved it!
JTS 29.63 pellets moving at 885fps grouping about .5" @ 50 yds.
The bolt was extremely sticky straight out of the box and would actually lock up from time to time. I was hoping to break it in better but it got to the point where I was spending most of my shooting time trying to free the bolt mechanism. At the end of March, I sent it in to UX for warranty work. Hadn't heard anything from them and since we are now in the month of May I called them. I was informed by them that they were just gonna send me a new gun and it was taking so long because they didn't have any replacements. I asked if there was a possibility that I'd get the updated SL and he said it was a possibility but don't bet on it. The rep made it clear that I would get whatever came in, SL or not. (At this point I just want it replaced with something that works.)
Anyway, my curiosity about the new model has got me wondering.
Your input here is valuable.
Thanks

This listing has been renewed

The scores are being tallied and posted on the AirgunOregon.shop Rifles, scope and ammo information for shooters who filled it our available as well.



Final 12 from the 100 yard benchrest pellet final



B1 Mike Bricker

B2 Luke Sowinski

B3 Gabe Valenzuela

B4 Todd Blanchard

B5 John Bagakis

B6 Linus Chechavicius

B7 Todd Hatfield

B8 Tony Pelligrino

B9 Robert Steele

B10 Kieth Short

B11 Fred Phillips

B12 Nathan Wilkening



The all new 100 yard slug benchrest final 12



B1 Brad Stevenson

B2 Todd Blanchard

B3 Gabe Valenzuela

B4 Luke Sowinski

B5 Chad Staten

B6 Mike Bricker

B7 Linus Chechavicius

B8 John Bagakis

B9 Bill Gardner

B10 Augie Sotelo

B11 Fred Phillips

B12 David Stevenson

chasdicapua said:

Glad you enjoyed watching the match. Now all you need to do is to tune your Wildcat down to 20fpe and shoot Hunter class. Or, just dive in and get a dedicated .177 FT rig. That would be the more fun option!!

Hope to see you at another match.

Chas

Click to expand...

I did find single shot trays on eBay... so the other detail to address as I get prepared.

This is a German picatinny over bore bipod, all metal made . I changed all mine to Accutac . And I won't be using This one $100 shipped..PayPal ff or add the fees could trade for .25 mk2 pellets 6 tins.

This listing has been renewed

This listing has been renewed

This listing has been renewed

This listing has been renewed

Well, It arrived about a week ago. Shoots pretty good for a $70. pistol. triggers fair, sights are OK. Im knocking cans around cosistently at 15 yards free hand. seems to like the alloy pellets better than the AAs. claims to shoot 400fps but I haven't shot it over the chrono. What pellets do you guys use in your pistols?

This listing has been renewed

This listing has been renewed

This listing has been renewed

Full and partial tins. The partial tins are all 50% or more full. $325 shipped. There are some dents in a few tins. The FX 25.4 are the worst. Pellets seem fine though.
FULL TINS

(13)15.89 JSB

(3) 15.89 JSB Hades

(3) 25.39 JSB

(1) 33.95 JSB

(1) 18.13 JSB

(2) 25.4 FX



PARTIAL TINS

(1) 15.89 JSB

(1) 15.89 JSB Hades

(1) 25.39 JSB

(1) 33.95 JSB

(1) 25.4 FX

(1) 18.13 JSB

This listing has been renewed

Solo1 said:

Well first of all i could not get the first reg to stay set above 160 bar. If i tried to make any amout of adjustment above 160 it would go to bottle pressure. At 160 at shot it would drop to about 130 and took a very long time to get back to 160 sometimes sometimes it would recover more quickly and the next shot would be very slow. I took the reg out and now you can hear the plenum fill and shoot as fast as you like and instead of having sd’s of 10-15 i have a sd of 1 so whats wrong with that? Oh and just for info sake when i talked to the guy at utah he said his m3 has no first reg either. Said it was 1 less thing to go wrong.

Click to expand...

I have the same issue with the 160bar or full bottle preassure, ive ended up with just full bottle preassure and it works fine. But in my case the issue with the slow filling is that I dont have the right bottle valve to use on my m3, I took my bottle from my crown mk2 and at that time i didnt know that the m3 needs a sleeve to put on the valve pin that push against the 1st reg, without it it wont open the valve completely, so I had to turn that valve protector thing all the way out so it pushes the pin more, if you understand.

Thanks for the info. I used to do some cad work in Pro/E back when that was a thing. Now the company has switched to Solidworks, but I am in management so I don't have direct access to any 3d software any longer. I've been trying to find software that is both capable, and cheap enough to justify in my hobby budget.

My 3d printer is a much lower end unit than that (Creality Ender 3 Pro), but it has served me well.

I put some Ballistol in a glass bottle with a plastic dripper. It's been about a year and it turned sort of cloudy and snotty looking.