I have collected 15 air rifles and 5 air pistols. I am not retired and have very little time to spend shooting. My wife says no more and I agree, I have too many, I can't shoot them all. My problem is I have not shot them enough to know which ones I really want to keep, it will also depend on where I end up in retirement. I only really have one more I would like to try, if I find it at a reasonable price, maybe. I am hoping to retire in a couple of years, at that time I will be able to spend more time with my guns and know which ones I can get rid of, I hope.

Sounds like a good idea. It's easy to access the hammer and spring, remove the stock, open the side plate with the four torx nuts, just get a finger in there when you remove the plate so it doesn't fly out of there and hit you in the eye, so wear eye protection when you do that too.

You could cut some springs off to make it lighter, but I'd not do that for obvious reasons, so try a hardware store or a good gunsmith should have a lighter spring.

That’s good info, thanks.

We have steel targets in our field at 50 and 100 that the whole family likes to plink on. So that is predominantly what it would be for. Although my 14 year old has finally showed a slight interest in shooting birds.

Now I really don’t know what gun to get lol

As new, tried on an FX Panthera Compact once and I didn't care for it. Comes in original box. $50 shipped USA only. Paypal F&F, I will ship same day from NH.
_______________________________________________________________________________________________________________________________________________________________________________________________

If you're uneasy about drilling into your factory gun stock, this 60mm bottle clamp will easily attach to your 60mm carbon fiber or aluminum bottles. It has rubber pads on the inside to prevent any marring to your bottle.
This clamp has picatinny rails at the bottom for you to connect your preferred picatinny accessories.
Features:
6061 T6 aluminum
Matte black anodize
Compatible with:
FX Carbon Fiber & Steel Bottles
RAW (HM1000X, etc)
Daystate (Redwolf, Airwolf, etc)
Brocock (Commander, Bantam, etc)
_______________________________________

FWB, for 300S, $125
Walther, late LG55, LGV, $125
Walther LG51, $50
Plus shipping

Me replaced that white oring with B90 and use it that way for years until the main scba valve orings disintegrated. Then replaced that valve with DIN, the worst was filling it back from zero.

well, if it isn't heavy, it is plated

This listing has been renewed

This listing has been renewed

Yellow Jacket FX Crown MK II Continuum with .380 mm length .25 caliber barrel and shroud. Also a 700 mm length .30 caliber barrel and shroud. FX stackable moderator, magazine in .25 and .30 calibers, Eagle Vision Infinity IPS-30 adjustable mounts, Aimsport Alpha 6 scope 4.5-27x50 SFIR. Sling studs added to stock. FX hard plastic case. This gun is a true tack driver in both calibers. About 3 1/2 years old. Purchased from Utah Airguns. Looks like new. Sits in the safe all the time. Message for more pictures or any questions. Air and pellets and you’re ready to go. 1,750 shipped to the lower 48.

This listing has been renewed

Today started off with light winds and they slowly progressed. I had a couple of irritating flyers for 7's shooting pellets on my first card.

I guess we'll just have to agree to disagree. And just so you know, I am currently hosting precision rifle matches and I encourage rimfire shooters as well as air rifle shooters to attend. I'm not interested in turning people away from shooting, I want more shooters and I want our national governing bodies to encourage more shooters. As a match director, I know what targets cost and what it costs to build props, and the hassle of having to fix targets in the middle of a shoot.

I wasn't trying to call you a liar, I guess we just have different experiences in regards to how targets get damaged. In my experience, targets have been getting damaged for decades but air rifles have only been in use at PRS events for two or three years. Also in my experience, in the last few years of shooting at high powered air gun matches, the targets are holding up much better than similar targets at rimfire matches. So you can see how I connected the dots of my experience.

To be fair, you did come in pretty hot about how we shouldn't be shooting air rifles for PRS in a section of an air rifle forum that is dedicated to shooting air rifles for PRS.

This listing has been renewed

This listing has been renewed

24" .25 condor for sale. Has ar grip, donnyfl sumo, 3d printed butt stock, and large tophat. $500 obo

I just ordered the above linked rings. Thank you all. Trust me, drilling or welding was last resort.. the rebuild kit I ised was directly for Feinwerbau in Germany...

SilentSquirrel said:

What are the advantages (and drawbacks, if any) of using this magazine, please?

Click to expand...

The cover comes off with a 180 degree turn of the keeper to give access without having to locatate a hole to drop your pellet in.

You still have to wind it up, but the pellets load quicker, and if you need to unload it, that is way quicker.

This listing has been renewed

I'm looking to Buy PCP
380$Shipped to Miami

Thanks you

. 22 air venturi avenger in custom carbon fiber chassis, with hawke Vantage 6-24x50AO scope and buck rail moderator. $300

Septicdeath said:

I thought these are pretty cool.

Diana Bandit Airbug Chaser Carbine Chassis Folding Stock Barrel Band NoSightRail | eBay

Full carbine chassis, very simple install with 2 screws. After you drop your Diana in and put on the barrel band, its ready to use. Very easy installation! There are multiple versions of this chassis.

www.ebay.com

Click to expand...

Nothing there, looks pretty cool. Here I go again, might have to have a Chaser.

bustachip said:

I like the blue laminate version too. The 97K is a great shooter. I would try some QYS 8.48 as well as JSB's, you never know, mine loves them.

Click to expand...

I will add that to the list….

At the very least, go with F6’s Amazon link. Molecular sieve is the way to go.

This listing has been renewed