Cartridge?

I just shoot pellets.

I use custom targets pellet keepers.

Metal tins with neoprene liners, 2 layers stamped out for pellets or slugs.

I use the trays from the FX Hybrid
solid plastic tray

I agree about the barrel clamp, could not believe how much difference it made in my accuracy. Shrunk my (30cal) 50 yd 5 shot groups from almost a inch to half inch outside to outside.

Nice.

Ir flash light to go with the wraith scope.

I'm looking for pbba big bores either a pbba .308 or a pbba air shotgun (professional big bore)

bigHUN said:

Last year during "season" 4-5 pairs of falcons were circling above the neighbourhood every day
Hoping to see them this year again ... less work with cleanup ... also cheaper for body bags .

the dope card is ready

View attachment 463693

Click to expand...

Yeh, I have a Redtail hawk(s) that gets one or two during daylight hours, especially if they are out in the open. I don't know if it doesn't see them close to the tree or shrubs around the edge, or just doesn't feel safe landing in those areas. I've seen it three times carrying off the bodies.
I've also seen the crows picking at them, but you can't get a picture of those wary critters.

nla

This listing has been renewed

This listing has been renewed

JimBentley said:

The original D34 was over sprung in my opinion. That’s why a tune is a great idea with these rifles.

Click to expand...

D34 T05 and T06 have a longer compressor than T01, which is why the power is different. In my opinion, these are completely different rifles ,but all D34 rifles are good from the factory.

Hold_Over said:

Out of curiousity, was the bucket completely full, or did they pass through the lid, then an air gap, then into the water? Interesting all the same though

Click to expand...

It had maybe half inch air gap. That would actually be interesting to see if it made a difference with absolutely no air gap...just the lid sitting directly on the water. I also left the lid loose because I didn't want to much pressure and it splitting the side out.

OMgosh! If you thought the Gen 1 was good… the Gen 2 will blow your mind

My go to for supplies and air guns. Tom takes care of business.. Just after you hit the payment button , you get a tracking number...............

I added some LEDs to the coolant hoses on my compressor to be able to see the water flow more easily.

But yes, as long as you add water wetter or perhaps a 10%/90% AF/DW mix, you can leave the water in there a long time. I plan to flush mine about annually.

Duplicate thread - locked.

I found the manual online saying m5x14

I downloaded the manual. Item #11
It shows m5x14.

Now I can ship the original size to the buyer of my first gk1.
I will get another, hopefully soon.

I've got a green dyed diana that has held up great. The only thing i would change is , i like a satin finish so the face doesn't stick.

Selling or trade for a GK1. This pcp is single handedly the most robust airgun I've ever hand my hands on, and I'm only getting rid of it because by buddy has another and I want to try my hand at a huben gk1.

Comes with the scope, rings, 250mm .177 barrel, 350mm .22 barrel and the extension.

Selling for $1200 shipped OBO

View attachment 20240509_160423.jpg

View attachment 20240509_160607.jpg

View attachment 20240509_160615.jpg

I shoot here on 100 meter/109.36 yard,groups around the 2 inch and it is outside in the yard.
It maybe go better inside,but don.t forget the shooter error,so the gun can do better.

Just finished sighting in the Diana 23 Iron sights . First time drifting a front sight , I was afraid i would be all day left then right then too much so back left again and on and on .
Luckily it was just a few knocks right and one left . HAHA maybe next gun, a tap and it fly's onto the ground .
Anyway it is shooting very close to ON . Now to learn to actually hit less than a dime group .Sighted in at 20 yards to start with .

Update- Huma wanted me to purchase the rebuild kit rather than tell me. At least they were polite about it.

Kudos to a certain retailer out west! The nozzle O-ring is 1.5 x 3.5. I'll purchase the rebuild kit regardless when they are back in stock out West