Brand new in the factory box as pictured. 10-40 magnification, focuses down to 10 yards, 1/8 MOA, elevation and windage range 50 MOA. COM-25 reticle sized for benchrest targets at 25 meters with target dot and posts. SFP. Includes Weaver rings. Perfect for Benchrest, Field Target, Silhouette or anything else. $175 shipped to your door in continental USA. Paypal F&F. Thank you for looking.

cavedweller said:

Do you have a link where I can find dates and locations??

Click to expand...

No link or website, CD; just a TEXtreme Airgun Sports email list anyone interested can be added to simply by e-mailing ME requesting to be added.



.

Shuggoth said:

Was just out plinking cans at 35yrds with my .177 c1 today. Such a handy carbine, put a Williams on mine but still have original rear sight. That's a steal at $100!

View attachment 451089

Click to expand...

Nice rifle! Hopefully mine looks as good as the pictures I got of it when it shows up next week.

Found! Thanks everyone

Hello and happy Easter!

I’m looking for a HW44, preferably in .22 and the full power version. May consider .177.

Thanks!

Hawke Sidewinder ED 10-50x60. Never used. Comes with everything pictured including Nautilus wheel. PayPal preferred, money order is fine too. $650 shipped/insured. 21st

Looking for a bottle adapter for my wildcat mk3.

See picture of the part that got damaged. The threads are stripped so want to replace with a new adapter.

Pm me if you have it.

Thanks

I made a mistake the other day and posted this outside of this section, I do apologize for that. And done so before my 10 days being a member. Second strike..
Today being my 10th day I will attempt this again.

Does anyone have an extra scope on the cheap, on fixed income and have an ex-wife. LOL.

can be older and used but need it to work good, it is for a gammo springer, .22
Looking for 3-12x40 or larger 4-16x44 variable power optic.
If anyone has one please drop me a message .

Thank you

Gerry52 said:

Assuming it's the neck o-ring where valve screws onto tank. Do you have a caliper? Get the size & replace it. Even the next size up in cross section should work. Should be easy to find at hdwre. store. If you DON'T have a caliper, get one! A must have for airgunners.

Click to expand...

You are correct. Neck o ring. Simple enough!

Selling an FX Wildcat MKIII bare receiver with hammer spring adjuster knob & screw. Long story short, I bought a Wildcat MKIII from a member and it wasn't as pristine as described, there were signs of heavy use and tinkering of the rifle. The hammer adjuster screw threads are partially stripped at the outer end as shown in the photo. There is also a hairline crack in the thread area due to the thinness of the casting and excessive stress put on the adjuster knob. It can still hold the screw but not with heavy preload. It may be a fully functioning part if the threads were extended farther into the receiver and a longer screw was used. Might be good for someone wanting to do some sort of customized build. I didn't have time to mess with it and ended up buying new parts from FX to fix the rifle.

Would like to sell it to recover a small portion of the cost for the new parts I had to buy. $40.00 plus shipping. I'd also be open to offers. Payment by Paypal F&F.

Remove the e-clips from the pins on the trigger group. After trigger components are removed it will reveal two screws. After removing the screws you will be able to remove the valve(*the valve is threaded in the tube*). Replace the seal on the valve.

Next, use the fill probe to unscrew the fill port cap to replace that seal.

Hardware store o rings are no good for hpa. Buy this seal kit https://www.ebay.com/itm/274298151751

*when removing e-clips place the gun in a plastic bag. They have a tendency to fly off when removing them

Thank you for getting back and letting us know. Too bad it wasn't better made.

Impact701 said:

That was definitely a deep dive into the DRS Pro.
Thanks for sharing qball !

I did a shallow dive into my DRS 22 700 this morning.
I am shooting the H&N 34gr Heavy slugs.

View attachment 451038

View attachment 451039
I backed the hammer spring tension out just a bit over 1/3 turn. The best I can tell my reg is set at 135 bar ???


These are the 1st shots from my DRS.
View attachment 451041
I'm getting about 20 shots, 230 to 150 bar, it's cold here yet.

Click to expand...

That's pretty damn impressive string! ES of 7 and SD of 2.6 and another string with ES of 2 and SD of 1???? That's really nuts especially for 1000 bucks!!! Let's see if any of those "game changers" can match that.

Pysiths said:

Remines me of the Kraford and Lypt Drake Gen5 Impact Trigger Guard.
View attachment 451380

Click to expand...

Geez, here I am thinking that I was a genius, but someone has already thought about it. Lol

Selling my beautiful TX 200. I never use it. She’s bone stock. There’s a scuff on the side of the stock that if I didn’t mention you’d never see but im
Honest and telling you. I’ve shot maybe 300 pellets through it. Asking $550 shipped CONUS. PayPal f&f

Back_Roads said:

I have a 550 headed my way, special offer while supplies last get a free compressor. Fastest shipping ever as they are located in Wisconsin just like me, perhaps their feet are permanently froze to the ground here ?

Click to expand...

OK I had a slight hiccup with my first Serpent I was sent, Serpent Arms was very quick and helpful on getting to the bottom of the issue and sent me a new gun, this one is a keeper.

TonyP said:

Where do u pick up Wildman slugs?

Click to expand...

Pyramyd Air, 3/4/24, used 14% discount mentioned here, now expired. (Product # PY-P-1818.) Order was (2) Javelin Gen 2, (2) Wildman, Dish and Flat base, all 60 grain. Recent testing shows flat base Wildmans OK too but weren't originally. WM

Looks like fun

Wheeler rifle scope leveling system, as new in original case.
$40.00 plus 5.00 USPS Priority Mail postage;

Luis
787 402 9751
[email protected]

bowopt said:

Hi.

Do you have the measurement as a reference of where to drill the hole? And how large the drill bit should be?

Thanks.

Click to expand...

No I do not have that.
Do not own the Dreamline anymore.

A.G.R said:

This is Farrah. It has as much feather as her. . … Its for a project I’m finalizing very soon . I’ll post later . Just thought it was to good to not share a sneak peak of this feather crotch beauty.. It will sit now for a week and then final oil/rotten stone polish, and but pad clean up. Oil dirtiys them when finishing them.. it has to cure before any solvents are used to clean them. HAPPY EASTER ….

like I tell my Girl.. “Good wood is hard to find, Hard wood is good to find”.
View attachment 450864TView attachment 450861View attachment 450862View attachment 450863

Click to expand...

Blanks like that don’t grow on trees….beautiful! John

minusprevious said:

Great to see we have a grouping of Christians, here, on the boards! Spent years admin'g on a car forum & seemed I was the only Christian there.

Great Sunday morning, resurrection day service today. God Bless / Praise Jesus

Joe

Click to expand...

Many say they are and then I here what comes out of their mouth. "It is not what goes into the mouth, but what comes out that defiles." Be wise. Be accountable. Bless you, Karl

no.4shot said:

With the monsters I am averaging 948fps with 53 shots filled to 230 bar. I am gonna try slowing it down and hope I will help tighten me up some.

On another note I did try a pellet assortment at 100 yards. My groups size doubled as expected. My fliers were even further off though. Tried some daystate howler slugs. They shot the best compared to the pellets. I need to order some different ones to test out. Does anyone have any recommendations for slugs in the RAW HM1000X?

Click to expand...

For Slugs, I did it wrong..I bought a bunch and just started testing. Wrong and expensive. What i should have done was Slug the barrel 1st to find the diameter. this will provide you with a proper size you require instead of buying a whole bunch and just trying them out. What you will need to experiment with AFTER you know the size is what weight and the speeds you will fire the slugs. There are videos on youtube to show you how slugging a barrel is done. Here is an example.

Rings are new or like new and were mounted very minimally. All are picatinny except the Hawke rings.

Element 34mm high fde - Cost me $165 w/ cerakot selling for $100 shipped.
Eagle vision 34mm - $70 shipped
Utg pro 30mm - $50 shipped
Utg pro 34mm - $50 shipped
The Hawke rings - $35 shipped
Athlon rings - $35 shipped
Nightforce 30mm - Cost $190 selling for $110 shipped

I would sell the whole lot for 300 bucks if someone wanted to take them all off my hands otherwise I'd have to go to individual fair pricing , and the pricing is fair so don't be cheap.

An ill take it message means next step is payment, I will not answer any questions after "I'll take it" or anything of the like.

I also don't use PayPal, i use venmo or zelle only. My feedback is impeccable.

Just got the rifle today, it shot okay. Grouped nice enough, but the stock scope is close to useless. Okay sight in it, but for some reason it does not react to my clicks at all.



Ordered a Donniefl silencer mount.

It's already on the bench for fixing the trigger and tightening up everything that is not tight.



It for sure does not need more power.

It hit1040 fps with jsb diablo 10.34 grain, out of the box.



I did get to ghetto try an atec silencer on it. And that did so much difference, I can't wait.

Tuning to the “knee” best video I have seen.