This listing has been renewed

I will also say that I traded for an airgun a while back and it came with a Monstrum 3-9X scope on it. I didn't even pay much attention to it and set it aside. Later, I thought I'd give it a try on one of my Royales and that thing is one of the clearest scopes I've used. I have no idea how the tracking is, other than it holds zero and I did crank it up and down and sideways a couple of times and it came back to zero but it wasn't enough for any kind of concrete proof it tracks. My only gripe was the thick reticle for airguns, but it wasn't bad at all, I've see UTG with thicker. I used it for a while and then my neighbor needed a scope and I gave it to him for his Huntsman, and he loves it.

So, I don't doubt it's a crapshoot. I just ordered a Hawke 1-4X turkey dot for my Notos and it's "ok", nothing special. It's "fairly" clear and the dot is just right. It's just kinda "blah". I'd use it if I had to, but for my Notos the Monstrum prism is absolutely so much fun to use, it's staying there til I mount a scope on it. The Marksman prism is absolutely clear, and for $89 a great deal. I'd love to be able to have "no tools" adjustments, but I just use hold over, so no biggie.

Thanks for all the information. I discovered that the valve is indeed leaking, calling JB today and see what he has as a replacement.

You’ll be good. Yep.

I have two mk 2's both have orings.

cavedweller said:

X4 is rocking it for you

Click to expand...

Now I’ll have to move my scope so the eye relief for 4x is spot on instead of 6x lol

This listing has been renewed

This listing has been renewed

The two large gages are 1/8 NPT and are Airtanks forsale aka Joe Broncado Gages. They work extremely well and are bran new. I use them in my Airforce rifles

The 3 digital gages were bought from huma air. 2 are bran new unused and one was used to test reg pressures when needed. All are 1/8 bsp

All gages work as they should. All digital gages will come with a battery in them they also have protective sleeves/covers

150.00 shipped for the lot.

Caliber 22 said:

I don't care how cheap / expensive or good any air rifle claims to be or how many spare parts are available, if it is not accurate or can't hold POI it's junk to me.

I don't really like to describe just any air rifle as junk as it may be another person's pride and joy with a different experience as I do.

Click to expand...

I'm curious what rifles you've found in your experience stack up best to this criteria. Those are factors I appreciate as well.

Thanks

Pyramyd Cup 2024 Registration Is Now Open!​

We hope you enjoyed the Pyramyd Cup in 2023 as much as we did. We are thrilled to bring the Cup back again in 2024.

Register Today HERE

maxtrouble said:

Are Egyptian geese considered a pest? Do you need a special license or stamp or are they like iguanas? Kill them all?

Click to expand...

Yes they are invasive and a pest down here. But most people try and treat lile outside pets that they feed so they always come back and defecate everywhere. In the mornings they are pretty much like roosters in the sense that they will perch up on your roof and honk to their hearts desires. They are not as bad as iguanas when it comes to being destructive to our agriculture, but they are aggressive. No the state of Florida doesn't need them all gone like iguanas but I am hired to removed just the same as iguanas.

He knows that you are the equivalent of a snack bar!

I ended up buying a airforce Texan, from a guy off here.

Weihrauch is made in Germany. Their scopes are not.

Glad to see Skout adding a rear rest to their lineup. I do have some questions though. It appears the rest has 4 leveling legs. If so, 4 points of contact are a hinderance to level a rest on any surface. Wouldn't it be more beneficial and logical to use 3 points of contact?

The elevation adjustment also makes me scratch my head. It appears that the leverage ratio of the cantilevered mounting arm creates a moment on the elevation post and therefore potentially binds the elevation screw threads in a less than ideal design of application?

Skout Airguns was kind enough to provide me with one of their first production run examples of the new SKOUT REAR BENCHREST. After a couple of trips out to the range to put it through it's paces, are my impression.

View attachment Skout Epoch Rear Benchrest Review_240408_043526.pdf

Request parts from hatsan but at for this for each gun
. Then order the spring gun parts not in the gas gun and convert ..

Probly just a guide spring and washers/ shims


Should be a few forum posts around on it and maybe a viewtube bid .. seems a few threads on like doing the hatsan 95 for example that puts you on track ..

This listing has been renewed

Yes, it's definitely a scam.

But send ME your money now!

.

JimD said:

Thanks Bill and the rest of you guys. I take it that it arrived Bill. I think you got a very accurate gun. You need to try some 30 yard challenge targets with it. I think it might do a 200. I have to really settle down and concentrate to get over 190 regardless of the gun's capability, however. For about the first year of shooting that target I almost never did. Fortunately I got better with practice. Shooting better from the bench definitely helps when you are trying to figure out what pellet a new gun likes.

I expect this to change but right now my Snowpeak guns are giving me better 30 yard challenge scores than my new Caiman that cost 3 times as much! I really enjoy finding a "cheap gun" that can can shoot with the "big boys".

Click to expand...

I concur with the less expensive guns hanging tough with the higher end guns

In street/drag racing it’s referred to as a sleeper.

Snowpeak is rocking it out

+1 for MERO!

Gently used Pard NV008 day and night vision optic, together with battery, case, instruction manual, and sd card. I upgraded the firmware to the version right before they eliminated the laser.

Zoom has two settings (6.5 and 13X), although there is a picture in picture feature. The built in IR torch has multiple settings and the reticle form and color is adjustable

Price is $415.00 shipped to CONUS. If you use Paypal either send F&F or add 4% to the purchase price. Bank checks or money orders work too.

View attachment DSCF7523.JPG

View attachment DSCF7524.JPG

View attachment DSCF7520.JPG

View attachment DSCF7522.JPG

Here's the new group - https://www.facebook.com/groups/1107993710321547/