Threads

rcs9250 · Jun 18, 2024

Smitty911 said:
Don't bother with the little one. My 18cu only fills my Redwolf a couple times. My Ghost a couple times before its below the regulator setting.

Don't get me wrong, if I were to go off hunting and only a couple shots possible, small is fine, any bench or target shooting, well....

In this case, Bigger can be better.

Smitty

What he said. If you have a means to fill the larger one it will be money well spent.

Zeke G. · Jun 6, 2024

This listing has been renewed

K80 · May 31, 2024

I love the tactic, got two of them .25 & .30

.20calguy · Jun 6, 2024

coastal drifter said:
timber was older back then

And the old Sheridans had real Walnut stocks.

Revoman · May 30, 2024

Gotcha. Thanks for the clarity, Alan (I should try looking at my own pics)!

Mike

Scotty1 · Jun 1, 2024

Humdinger said:
+1 on the DIN300 male adapter for your Alkin fill hose. I prefer the solid connection of the male DIN to the DIN300 female on your tank valve. Remove the hose and DIN300 male that is part of your tank's fill hose assembly to use the fill hose.

One of my tanks has an Omega HP3 valve which fills via a male Foster fitting. I've filled it several times using a microbore hose connected to the tank hose and the fill time is identical with no change in the sound from the compressor. IMO, a microbore hose doesn't cause a compressor to labor due to restricted air flow. Tank check valves restrict air flow more than microbore hoses yet that isn't a problem for a compressor. It might be an issue for an industrial quality compressor filling a 10CFM+ but not on any 4.2CFM or slower filling compressors like air gunners own.

Sometimes individuals over think things. 15 minute warmup runs, 15minute cool down runs after a fill, 30 minute runs every two weeks during idle periods, 3 oil changes a year, etc. might make an owner feel good but really is unnecessary. It's a waste of electricity, expensive oil, and a waste of time. Think about it. The reason an owner buys a high end compressor is to get fast fills, save time, and expense from traveling to a refill source. Adding time for excessive maintenance rituals negates the advantages of owning a high end compressor.

My warmup consists of turning it on with bleeders open for maybe 10 seconds or so to splash some oil before before filling. My cool down is run with bleeders open until no droplets or vapor is seen from said bleeders, then turn off, let it cool and cover.

OscarDawg · Jun 13, 2024

This listing has been renewed

Headshots · Jun 1, 2024

I shoot them on occasion and haven't had as large of a fps swings as yours . They always have more STD than other quality pellets . These are the crossman cphp 7.9gr . Using a Taipan short.

MDriskill · Jun 5, 2024

Chuck-in-Ohio said:
Dave Enoch had some nice Slavia 630 and 631 rifles that were priced at the deal of the week level, and he was dealing like a mad man to move stuff along. I bought an Anschutz 333(Crosman 6300) for a price that made us both happy.

It was great to finally meet Dave and chat in person after years of on'n'off correspondence!

And he deserves some sort of medal. He literally rescued that bunch of guns from being trashed, and drove all the way from Texas to sell them to us at ridiculously good prices. Ya just gotta love airgunners!

dens228 · Jun 5, 2024

This listing has been renewed

dens228 · May 29, 2024

Fx M3 stock trigger guard and top rail. $40 shipped

M3 22 cal magazine. $35 shipped.

Conus
Paypal

C140Cessna · Jan 16, 2025

Tackleberry said:
I have been cruising around the AirgunForum UK. And they have been talking about 6yard targets. They appear to be scaled down 10m targets. I can not find a source for them here in the states. Does anyone have one. I have a pdf, but printing targets on copy paper sucks. I was going to buy some from the UK. But they come in sets of 2, 3 and 4000, for 149 pounds plus shipping from the UK. I have a feeling the shipping would kill me. Probably more than a targets themselves.
If anyone has any idea where to get some here in the states, please drop me a note. Thank you all in advance for your help.
Sincerely,
Tackleberry

If you really want to humble yourself….National Target prints a 50m International Free Pistol target reduced for 25 feet. The bull is like an inch….they could be used as 4.5m AP….if you’re shooting in a very tight space.

A standard 10m AP target at almost 25m is like a Free Pistol target.

I can do exact scaling if others are interested.

woogie_man · Aug 5, 2024

I have found that NSA are indeed harder. The lead I am using for my slugs is pure lead from Corbin.

I am going to do some more testing with different ranges and will see what happens. Though I did have no issues hitting targets yesterday out to 160 yards.

dens228 · May 30, 2024

Mr.H said:
Nice rig! Question coming from a lefty: How far does that mag extend out past the receiver? Looks like it would interfere with a good cheek weld for a lefty.

I don't notice it at all and am also a lefty.

Arkansas_Airgunner · Jun 3, 2024

rcs9250 said:
I buy the cheapest paint Lowe’s has on the shelf. I probably should check Dollar General though.
I only use white as it shows hits best.

I use white a lot but I also use HI VIS Orange too

thomasair · May 31, 2024

Vertical Deflection For Pellets In Crosswind - Hard Air Magazine

This month Bob Sterne reveals some surprising information about what happens to airgun pellets in crosswind. You may need to read this more than once…

hardairmagazine.com

Scotay42 · May 29, 2024

Ataman makes a very solid and accurate rifle. This one is as accurate as you are, and has an excellent trigger and very solid regulator right at 35fpe. the soft touch synthetic stock is very nice for hunting. 3 magazines, varmint scope 2.5-10×42 and 3 tins of jsb 18.1 for $750 shipped obo.

Hookup66 · May 29, 2024

Taipan Veteran .22. Bought my gun new in May 2020 from Georgia Airguns. It is stock. I estimate less than 300 shots thru it. After a year of no use, I removed it from the gun safe and noticed it had developed a slow leak. I sent it back to Charlie at Georgia Airguns and he re-sealed it. I haven't shot it since i got it back.

I moved to a neighborhood where It's difficult to shoot without the neighbors noticing. Because of that, I decided to let it go.

It comes with everything as original. Taipan Box, Owner's Manual, 2 Magazines, Single shot tray, xtra O-rings, Metal adjusting pins, and the Fill Probe Adapter.

$750

Shipping is $35 in the U.S. Feel free to PM me with questions. Ill provide my phone number if you want to talk on the phone. I'll accept Zelle, Venmo, personal check, and Paypal friends and family. Thanks, Jeff

kingfisher61 · Jun 6, 2024

beerthief said:
SO ? i should not look for a lefty ? beautiful gun you have again .

Not sure if they ever made it in lefty. Now THAT would be a unicorn!

Ezana4CE · Jun 18, 2024

I believe that “coins” the OP is referring to are fabric discs used to separate various media (desiccant media) within the filter housing. I don’t know the proper name for them, but it sounds like that is what he’s referring to. @Gerry52

anonymous_.457 · May 29, 2024

Looking at buying a shoebox compressor or altaros booster pump.. my number is 601-641-1504

SanDiegoOne · Jun 15, 2024

This listing has been renewed

Jesfranco · Jun 20, 2024

This listing has been renewed

SmackDaddy · Jun 18, 2024

Headshots said:
My 3 most accurate out to 50y so far are , fx most accurate, then the baracudas, then ...
View attachment 473277

I also use the CPHPs in 7.9 and 10.5gr and other cheap pellets for plinking . Not the best past 30y for me. But still fun to shoot groups with .

I just ordered them 10.65 H&N barracudas,
i read some super bad reviews about that brown box from crosman,
like how bad they are finished!!!
bought a crosman piranha 10.5…
oh my lord so bad theses were swinging in mid air like that ball them pro pitchers throw and then the ball does that swing mid air!!!
returned it right away…

Jesfranco · Jun 24, 2024

This listing has been renewed

Threads

Threads

Filter