***I have decided to keep it***


I have a 300s late model universal with an adjustable comb. This rifle is in excellent condition with new seals but original springs. Wood has a couple handling marks and bluing as excellent. Comes with diopter sites, original box, and literature from Beeman to rebuild the rifle.
$875 + shipping.
Pics available to serious buyers.

This will be my last post regarding the construction of air gun moderators on this forum. This is per the wishes of forum management. I can only speculate as to what might have motivated that choice and that would be counterproductive.

I am still interested in testing moderators and I would be open to test any moderator anyone ships to me and return that when I am finished with it I'll pay shipping on my end. I have developed a test which I think can be used to compare apples to apples.

I have a request in to management to check and make sure that would be acceptable before I start doing it.

If you're interested give me a thumbs up I'll contact you.

I 'might' be concerned about the breech making the pellets too small for the bore. If it shoots dight groups then you're golden.

Thank you!

I hear there's a poi correction function potentially. In the new firmware update there's now an alphabet in my zero menu in the scope firmware that I suspect may be related. If it doesnt have that function it would be neat to be able to paper the gun and input the data manually per range if the ballistic calculation was off. Previously I had simply toyed with velocity, bc, and initial zero range to get as close as possible (usually by using strelok to help me achieve the variable mods).

I was fighting a misaligned impact top strap and rail at that time and wished I could enter a windage value for each range to compensate. A 1 piece rail fixed it. My initial problem was shooting left at 15 yards, dead nuts at 60(zero) and then back to way left at 100 and progressively worse farther out.

God bless you and thank you for your service. Have a wonderful retirement. Good start with that 300. Enjoy.

.177 Daystate Huntsman Regal (unregulated) with right hand stock . Comes with moderator, one sling stud on the front, one magazine, single shot tray, original manual and paperwork. Excellent condition. Beautiful stock. It may have some pressure marks, although I don't see any. I can see two small pinhole size marks near the air fill cap, and one scratch on the underside of the moderator (doesn't show unless you turn the rifle over).

I believe that I'm the second owner. I bought this on a whim. I already had the regulated version. I haven't shot it much, but it seems to shoot accurately and consistently. The last owner claimed that he shot feathered pests at 70 yards with it. That's beyond by ability. I shot the targets below this afternoon at 40 yards. Not great, but not bad for an old guy a cheapo scope (not included). I'm sure you can do better.

$750 shipped within CONUS. PayPal Friends & Family. No trades at this time. Thanks for looking!

Thanks so much for giving me a reference. We can come back any time we need a memory jog. Be Well, Bandito.

Michael said:

Click to expand...

Top notch, easy to work on. I thought you knew!

Just got myself a S200/CZ200 in .177. Small and light rifle that's perfect for the backyard if I need a bit more power than the Beeman R7.

Is the cocking on this thing that hard/stiff?
What's the small adjustment screw on the top near the cocking? And where can I get a replacement screw, mine look jacked.

Beside that I think I am going to enjoy this little thing for awhile. Not even that loud without the mod, so no need.

thanks,

This listing has been renewed

Have fun, congratulations!!

Brand new ?! shooting like that ? I'd be calling for a fully paid Return Authorization from the dealer and a replaced rifle.

MartinT said:

They must all be Taipans then…
The good news is you can get by with only one riser for all of them! And since it has these thumbscrews it’s much easier to change between guns than the standard mount which needs a hexdriver!

Click to expand...

I took a close look and they do differ a little bit. But you're right about being able to just put it on other airguns because of the thumbscrews (which I normally hate) I still have to address the reason I need one at all so I asked my wife if it was me or the guns. I guess she already knew

Agreed

Used the new 10.03gr Jsb gen 3 and the lead free 8gr zans slugs today. The two 5 shot groups were 45yds away shot with the 8gr zans in 15mph winds gusting to 22mph from a golf cart. I was aiming at the white spots I am pointing to. I did increase the power a bit more by turning a quarter turn on the hammer, so I'm not sure how fast they or the jsb were going after that, but before tuning the 8gr zan were going 940fps and the jsb 10.03gr were going 920fps

psweene01 said:

Recently I had a Left-Handed Black/Grey Stock Air Arms XTI 50 lost during shipment. The Shipment was tracked from Middleburg Heights Ohio to Buffalo NY to Shrewsbury MA to Hartford CT and then went missing. If anyone sees an Air Arms XTI 50 listed for sale in these areas, please PM / Call or Text – Pete Sweeney cell: 401-644-6224.

Click to expand...

Which shipper allowed it to be stolen?

psweene01 said:

Recently I had a Left-Handed Black/Grey Stock Air Arms XTI 50 lost during shipment. The Shipment was tracked from Middleburg Heights Ohio to Buffalo NY to Shrewsbury MA to Hartford CT and then went missing. If anyone sees an Air Arms XTI 50 listed for sale in these areas, please PM / Call or Text – Pete Sweeney cell: 401-644-6224.

Click to expand...

Another one?? Jeez, I'm sorry for your loss man.

Thought Id try the new AEA pellets In 18g . using my new Kalibrgun snipe .22 1000 fps at 50 yards . not to shabby .

I bought the LCS SK-19 last year for $2300 from Airguns of Arizona. Last Jan. the trigger broke and I called AOA about repair. They said send it to LCS. I went to their website and on the customer service page they list two ways to contact, email and a phone number that's "whattsap" and excepts text only. I emailed them and "Rickey" wrote back and gave me an address to send it to. He said it will take 3-4 weeks to fix. I sent it UPS and they got it Ja. 22. Three weeks laer I emailed them asking for a status update. No answer. I texted their phone number, no reply. It's been over 8 weeks now and after dozens of emails and text......nothing. I google earthed the address and it's the post office! I did a corporate search and found nothing. It's like they are trying to hide. I contacted several attorneys in Greensboro, NC and nobody wants to take the case. AOA says they quit dealing with LCS 2 years ago. I

I was wondering if anyone else has had and negative experience with them?

This listing has been renewed

spywiz said:

An "old" friend called me and has another retired firefighter friend that is a little weaker in his old age, and has COPD. His wife died this year and he is watching the starlings and blackbirds eat all of his birdseed. He is looking for a Co2 rifle that he can shoot the starlings, up to maybe 50 yards. I know absolutely nothing about Co2. Could yall suggest a decent Co2 rifle that I could suggest to him to get for his old friend? He wants C02 because he don't think the old fella is strong enough to cock a break barrel and a pump would stress his breathing. I told him that I would post the question on AGN and let him know. Thanks to all for the time and attention.
Bob-

Click to expand...

where is he shooting and what is in back of what he is shooting at ? a CO2 rifle can shoot a long way if you miss ! A CO2 rifle shooting a Crossman dome pellet (walmart) can blow right through a starling body @ 30 yards i would think .
P.S. C02 is also a loud pop or can be .

I want the wood stock version. They have it but you don't. Can you get it?

This listing has been renewed