When I had the Discovery, I mounted the scope forward of the loading port with a one piece mount intended for springers. Fixed the eye relief problem from the short stock, and made it way easier to load.

Some things just go together like the Avengxe-X & the RovAir!

dizzums said:

hmm .. they tend to be BIG guns .. even my bulldog with an emperor and an atn w/rangefinder is quite a giant contraption to 'freewheel' lol .. in a good rest though its a lazer to well past 50 .. if you can make a caldwell turret rest work in your situation i highly recommend .. note how smooth and fluid the target can be followed, and 'pulling' off target with adrenalin pumped trigger squeezes is almost eliminated .. it works ..if you got a place to put it ..

Click to expand...

Very nice shot!

FLgunner said:

Part number is JT-180A, you can get one off Amazon.

Amazon.com

or AliExpress.

https://www.aliexpress.us/item/2251832652794742.html?spm=a2g0o.productlist.main.5.4b8fa4y7a4y7XO&algo_pvid=1cad3cac-4b2f-41a6-8cf6-075df3c83a42&algo_exp_id=1cad3cac-4b2f-41a6-8cf6-075df3c83a42-2&pdp_npi=4%40dis%21USD%218.55%214.27%21%21%2161.67%2130.83%21%402101d69a17146058669584745ee30a%2165127429167%21sea%21US%21815092783%21&curPageLogUid=yVUZlTb013XN&utparam-url=scene%3Asearch%7Cquery_from%3A

Just be aware, the middle (white) wire is not used and you will have to reuse the connector from the pump in your compressor. But that was a simple swap!

Click to expand...

Thanks

This listing has been renewed

You don't need a hunting license to hunt Iguanas in any Wildlife Management south of Fort Myers, just pay the entry fees. That being said, most of the best locations are not in the WMAs. It would probably be best to go on a guided hunt first, to get familiar with where you can play and where you can't.

kevin10 said:

Other parts available for that rifle as well.

EDgun · New Steam Valve for Matador R3 & R3M · KL100220

We are renowned manufacturers of PCP airguns, pioneers in bullpup designs and tireless innovators. We are always looking forward into the future while keeping faithful to our essence.

www.edgun.shop

Click to expand...

kevin10 said:

Other parts available for that rifle as well.

EDgun · New Steam Valve for Matador R3 & R3M · KL100220

We are renowned manufacturers of PCP airguns, pioneers in bullpup designs and tireless innovators. We are always looking forward into the future while keeping faithful to our essence.

www.edgun.shop

Click to expand...

kevin10 said:

Other parts available for that rifle as well.

EDgun · New Steam Valve for Matador R3 & R3M · KL100220

We are renowned manufacturers of PCP airguns, pioneers in bullpup designs and tireless innovators. We are always looking forward into the future while keeping faithful to our essence.

www.edgun.shop

Click to expand...

Thanks for the information, I'll try asking tomorrow. Compared to the one in the photo, mine measures 58.55mm for the metal part and 50.31mm for the Teflon part.

This listing has been renewed

The good news...everything is lookin' good and ready for the Sunday June 2nd match at Delaware County Field & Stream Association.

The bad news...the Sunday May 5th Airgun Field Target match was rained out.

A big thanks to George for his help gathering in the targets and concrete blocks.

Hope to see YOU Sunday June 2nd!

Mark - 5 May 2024

This listing has been renewed

Just checked date of purchase 8 years that o-ring lasted.

Nice. Five years is quite a long time. Congratulations!

Off topic posts belong under your profile on the Social Media link.

Scroooface said:

That's not a starling.. more like a grackle... Blackbird.. and get that gun out of the rain

Click to expand...

I figured that after the fact. It was raining pretty goods the time I ran up to take the pic. I use my guns in ALL WEATHER. I do take very good care of them though and don’t shy away from disassembling and thoroughly maintaining them.

Rats are hard to shoot, they don't sit still long. This pressures me to take quick COM shots giving me a better chance of killing them if they suddenly move. During the 1st encounter the rat seemed to have ESP and jumped out of the way of the pellet just as I pulled the trigger. I estimate the pellet got there in < 0.9 seconds. How did it know when to jump out of the way? Even it it heard the shot, the speed of sound is only slightly faster than the pellet so it wouldn't have enough time to react. A few hours later it came back. This time is wasn't as lucky. Not an instant death but its a rat I don't give a $hit. Just want the highest chance of killing them. I'm shooting my raccoon loads of 34g 0.25 JSB MK2 at 890 at the muzzle. The shot was at about 23 yards. I thought it would easily pass through even this large fat rat. But as you can see from the photos I couldn't find any exit hole. I even moved the fur around looking for the exit.

So 2 surprises. The rat has ESP and why didn't a 59 FPE pellet pass through its body? Since this load cannot even go through a rat, should I consider a more powerful gun or different pellet for raccoons? I've haven't had any problems putting raccoons down with this load if I do my part and hit the brain, its been 100%. But from this experience I wouldn't expect the pellet to penetrate very deeply into a raccoon's brain.

The video show the following:

1. Slow motion of the 2 shots.
2. Photos of both sides of the rat, only one hole seen.
3. Regular speed video of both shots.

This listing has been renewed

WTB FX Impact MKII. Please let me know what you are selling. Thanks! Kevin

By "water going EVERYWHERE" do you mean in a bucket? Judging from your past posts & "experiment" questions I think I'll follow someone else's advice. Imho it'd be a lot SAFER Best of luck to you

Looking to buy big bores in .308 or .357 or .495 or .510 or 58cal or 72 or 82cal any brands just not AEA..

In my opinion this optic is not a great choice for airgunners. If for no other reason than it lacks a laser rangefinder. I’ve had a 384 Rattler and returned it rather swiftly. It’s really difficult to determine how far away an animal is if you don’t already know before it comes into a bait station or something. I believe that better deals can be had for the price point of a 640 AGM Rattler thermal scope. If you don’t require a laser rangefinder maybe look towards Bering Optics. I haven’t seen the quality of Pard’s thermal optics, but they seem to be a better bargain considering the comparable features that I’m thinking of off the top of my head. I’ve owned a couple of AGM thermal devices and I’m not impressed by the image quality of the internal processors they have used. I have also owned a couple of other brands. Pulsar is a brand whose image quality that I like. To me their 384 units produce a better image quality than an AGM 384. Take what I’m saying for what it’s worth to you, but I think the title of this video is misleading to unknowing airgunners.

I love the big Diana’s, but I’ve never owned an 52.
Owned an 48, and have a 54 and a 56, but not a 52, yet…
And yes, that skip checkering is gorgeous!

Thank you very much I really appreciate your opinion and experiences to everyone of you, and other thing that I need to consider is warranty most of the scopes offer lifetime or limited warranty 3-5 years. So be safe everyone

Here's another picture of Master Lucas - teaching me how to shoot WFTF.

Oddhawk said:

Sounds like a fill port o ring or poppet valve, listen to the barrel and if it's coming from the inside of the barrel it is the valve or use soapy water to find. Put a drop of silicone oil in the fill probe before adding air, might take a couple times to work if it does. I have a flash and am very happy with it, I started with the heavy weight pellets and now shoot . 50 grain slugs. Could just need to be shot a bunch too smooth everything out.

Click to expand...

Which brand slugs? Any issues appear after shooting slugs? I just got my flash today love how accurate with a Walmart bushnell scope