For sale is the .22 cal Taipan Veteran Long. This is in mint condition. Green laminate stock with absolutely NO scratches or blemishes. It features an extended plenum for power tuning(done by Talon Tunes). It shoots slugs and pellets great with its CZ barrel. 1/2x20 muzzle with thread protection can accept your favorite LDC or moderator. JSB 25.39gn shot consistently at 935fps home in hole at 50 yards. Comes with 2 magazines with onboard mag holder. Fill probe and fill probe holder also included.Also an added cheek comb has been installed. Paid $1,875.00 but selling for $1,000.00 or reasonable offer. Buyer pays shipping. Will include a hard case if needed and 1 tin of 25.39gn JSB Redesigns and Knockouts and 1 tin of JSB 18.39gn. Believe me I know what this rifle is worth and it’s not sentimental value being considered. It has one of the best triggers I’ve ever put my finger on.

Last night I ordered 10 tins of Baracuda 18's, ETA tomorrow.
But today I spent my time in my club on this story. Just because I have many tin chunks and don't want to store or collect.
Detuned for Baracuda 16 @ 20 Meters, and swap to Hades 16's. Surprisingly the results were both a single hole with 4 shots string. Started from 840 fps and slowly climb up to 875, the pattern showed intention to open up and close and repeat with every 10 fps increase.
Even a PB guy joined me he never saw airgun before other then you can get in WM... he was very impressed with the Leshiy2 performance.
About some hundred shots later I didn't settled yet, not sure what speed I want for backyard... 840-850 maybe, that will be the 16gn to 18 gn direct swap about ????

lonedave said:

Wow, 538 fpe with a 155gr slug. That’s impressive! The 376 fpe with the 200gr is more what I remember the Badgers capable of. Is the 1250fps correct?

Click to expand...

Yes sir but it's been power tuned.....

anonymous_.457 said:

My .457 pbba only has a 21in barrel and with my power tune it's doing 850fps with a 340 grain slug.....

Click to expand...

Dude he only filled it to 3000 psi with a 15 in barrel. What are you talking about.

Anyone own both and can confirm if the air cylinders are interchangeable or not?

This listing has been renewed

I guess my initial post was confusing for some folks so, I'm editing for clarity. This is NOT the Sidewinder Mini. It's a standard length Sidewinder that I had the barrel machined 2.5 inches shorter and crowned (my thought process was, it's not a mini...it's not standard length...I'll call it a compact). The same machine shop rethreaded the gauge ports as well. I apologize for any confusion...

I'm selling my .25 cal Sidewinder, as pictured. I shot a magazine through it prior to modifying it and then, another magazine through it after the modifications. It's pretty low mileage. I shortened it 2.5 inches and retreaded the gauge ports for 1/8 BSP to accommodate the Sekhmet gauges. I'm selling it as pictured with the Vortex scope, DFL moderator, Hogue grip, Magpul rail cover, Steiner laser/light, bipod, and whatever else you see that I'm forgetting at the moment. I'm having trouble locating the original soft case that came with it so, it included the case pictured. Also, it will come with the factory shroud and moderator pictured as well as the charging cabled for the gauges. The Vortex is new and I have the box and literature for it as well but, none of that for the Steiner. I installed the hair roller type "moderator" thingies around the barrel toward the bottom of the shroud. The moderator adapter is DFL and was a limited run he put out a while back.

There are a couple hard to notice marks (near rear gauge, optics mounting mark on the rail, by the regulator, and some wear on the Steiner from it being on a pistol in a former life) that could be easily touched up or "sharpied" a little better than my quick attempts. Anyway, it comes as pictured. Although the other moderators are for sale as well, they are not included in this listing...I just forgot to clear the bench before taking pictures. Only the one on the gun is included.

I'll take 2k for the entire package on Paypal F&F plus $45 shipping to the lower 48. Kelly at Krazkool gave me permission to list him as a reference that I'm a real person and honest in his experience however, he cannot vouch for the gun since he's not handled it. Thanks for looking and, this is my first sale post so, my apologies if I jacked it up. Oh yeah, I'm in Missouri...north of KC about 45 minutes if someone wanted to pay cash and pick it up.

Hal4son said:

First blacked out 12 seconds is before the ir was turned on as I was moving into position. The stand alone ir is not aligned quite right with the bulk of the beam hitting low. You can see me trying to adjust the beam at 1min 45 second mark. At 2min 35 seconds in the video the onboard ir is turned on and replacing the stand alone ir unit.

Cat starts out at 160 yards and moves in to 80 yards. Pardon the shaky parts of the video.

Cat 160yds

rumble.com

Click to expand...

It definitely looks like it stays clear up through the higher magnification!

I have several sets of scope rings that I am not going to ever use, most are new and unused.

Small Print:: Just select the letter of the pair you want. PM me your selection, attach your address and Ill throw them in a padded envelope and mail them off to you. Ill strike that letter off the available list until they are all gone. This is first come, first choice.

Throw me a few bucks for shipping and we are all happy!

E & I, F & G, A & B, H, C & D, J are taken and removed from the list.

Rings are in the wind!


K

L

This might be a kit for 2 rebuilds but I’m not 100% sure. Found it in a drawer and no longer need it. $25 shipped in continental USA.

This is a used Mad Dog Stock. Fit the Condor SS for sure, maybe others, your call. Have both mounting bolts. I had drilled a 5/16 hole in the bottom of the grip for weight. There are 2 holes drilled in the forearm where I had a rail mounted on it.

$120 shipped within reason.

Looking to part with my FX Crown VP. Purchased from UA Christmas of 2022. Single owner.

Synthetic Stock

380mm .22 Barrel - STX Superior 1:24 Twist

Comes with 1 Mag

Case not included

Current tune , Velocity is maxing out at 915-920fps with 18gr FX pellets.

Small scratch on shroud(pictured)
light scratch on bottle(pictured)

Asking $750 shipped CONUS.

Pay pap FF please or usps Money order. Will ship after it clears.

Please PM if interested.

Happy to help

The bucket of rubber mulch works well and is not noisy. So far about 40 pellets through the lid and no issues. A buddy says he might have a metal box for me so I might try that too.

I have 2 for sale. Ideally would like to trade for 25 cal mags. Otherwise, 45 shipped each.

One sold! One more to go!

frankie said:

Lothar Walther or CZ barrels for the FX impact.

Click to expand...

Which I believe will fit the Maverick if not, make it so. I'll two, one in 22 and one in 25. 500 and 600 mm, threaded for the things we can't talk about.

I've been thinking about getting a Bintac AEA S357 for iguana hunting in South Florida. Maybe it is a little overkill, but I think I would like to shoot the 68gr .357 SLAP bullets from Rat Sniper. I know there are 25/30 cal guns that shoot the same weights, but not much penetration is needed on an iguana.

Just wondering what people's thoughts are.

Sky King said:

You won't get a better deal than now Black Friday Sale at AirgunDirect.com

Click to expand...

Hmmm... Age discrimination . Oh well too bad so sad

Should I buy the name ?

In very good condition. Mechanically sound (tracking, turrets, magnification etc work as they should). Some scratches in the finish, shown below. Model number 26015, MOA-2 non-illuminated reticle. 2nd owner, & I do not have the factory box.

$275 shipped CONUS, PP F&F or USPS money order. Not interested in trades.

It’s great stuff shooting these nasty things with the right setup.

Franklink said:

I agree, the 0DB 110 is just not very effective as a standalone moderator. Where I've find it works best is as an add-on to a shroud, preferably a shroud that has some baffles or an internal air stripper of some sort.

I've stuck my 110 on the end of a Veteran shroud, the end of a Red Wolf shroud, and the end of a Ghost shroud and been pleased with the overall report from a relatively high powered airgun, but again, as a standalone moderator, it's typically not enough.

Click to expand...

Same

Looking for a Dreamline .177 Pellet Probe. If you've got a spare or one you're not using drop me a reply.

Thanks,
Tom

Beautiful safe queen. No regulator,no leaks, no problems. Scope and mounts not included. Anthony Story direct fit moderator and 3 factory magazines are included. Has Best fittings foster fill upgrade. 850.00 shipped conus.

Got an actual starling in the barnyard, lol. Chip shot at 20 yards.

They are as new !
Picatinny/ weaver mounts .
30 mm .
Asking 55.00 $ and i will pay for shipping to your door in the lower 48.
Postal money order only .
Thanks Ray