This listing has been renewed

Hi guys,

I tried to buy the P35's valve spring and couldn't find it anywhere in where I live. Do any of you have the technical specs of the spring? I can have it made of the specs are clear.

Thanks!

I was going to dive into resealing my DreamTac to resolve the leaking fill port. I got it out this morning and it had not lost any pressure. Listened to the fill port, where I had been hearing the leak. Nothing. Not a peep. Topped it off to 230 bar from 210 bar. No sound of a leak. Problems that fix themselves? okaaay... Probably some pet hair got in there and has now blown out by the leak and multiple pump sessions to refill the reservoir from zero. Shot a mag and a half of lightweight pellets and am pleased that there seems to be absolutely nothing wrong with the gun for the moment. If it starts leaking again, I'll rip into it. For now, if it ain't broke I'll leave it and keep on shooting.

My POI only shifts when I leave the gun prefilled for more then a day or two. If I air it up and shoot right after, it's a tack driver for over 160 shots, no issues at all. The crown also is a tack driver but the previous owner had it set up for the 25g JSB redesigns and once I run out of those tins I'm going to adjust the reg and HS to get that to shoot the 15g JSB's as well.

Dairyboy what would happen if I shoot to completely empty? I have gotten my tank down to as low as 900PSI but never completely empty. What could theoretically happen if it goes down to zero?

SCOPE AND MOUNTS NOT INCLUDED. I’m selling my pretty much new rifle. Comes with one magazine and a single shot tray. No leaks. She’s an excellent rifle I just use my edguns vs this guy so there’s no point in keeping it. She’s as she came from aoa. Asking $1600 shipped PayPal f&f to lower 48. I’ll be shipping it in a hard case for best protection. I don’t have the original box. The shot string is with 15.89 hades

This listing has been renewed

Looking to buy barel kits. Interested in any caliber. 177 through. 25.

Following.

Nice scope but I don’t have a use for it anymore. No box, comes as is. Great shape. $150 shipped.

$45 shipped. They’re in great shape. PayPal f&f

Hold_Over said:

Came across an Umarex rifle I couldn't help but click on out of confusion based curiousity. The tactical styled, collapsible stock, h/k mp7 replica in a low velocity break barrel single shot format. Under 500 fps in .177 it has little practical use or entertainment value.
https://www.umarexusa.com/2252312
What kind of strange/borderline useless stuff have you guys come across searching the web?

Click to expand...

This gun fill's a sales notch for the company

Looking for an FX Royale 400 in 0.177 caliber with either walnut or laminate stock. If you have one you might be willing to part with, please let me know.

TIA

Removed for now

Personally I would buy the new version to help support the barrel and shroud alignment in hopes you will limit your risk of clipping. As far as exit diameter I would get the 30Cal version in case you dont get a perfect bore alignment.

I have the cheapest one I could find that had s-lock (a must have imo) and a sling stud adaptor included. I think it's a knockoff of a Harris. I've removed the whole tensioning system and and can bolt it directly to the adaptor. So far it has worked decently fine although I've had to fix some stuff. I guess that proves it's quality. Not a deal-breaker to me.

My wife gave me the green light too when it finally came to her flowers lol

This listing has been renewed

I know it won’t to a full fill, was just trying to see how long it will take to get below the point where it is charging below 2000 psi or so per charge

I broke the stupid little copper line that joins the front cylinder and rear bottle so a re seal is the least of my problems now.

PumaCarl said:

I would say that it appears to be a medium thickness. I would call a first generation Vector Veyron SFP to be be thin(it's certainly thinner), and an old German No. 1 about the thickest. It is not bad at all. The scope works fine as a scope, it is just not tolerant of not being set perfectly to me, and the IR is annoying. I just think that a lot of compromise happened to make a scope this small and still work. If you really want or need the small, there really isn't any other choice I know of. The other person hunting where I'm at has continued to use his all summer and has shot many woodchucks with it mounted on his BRK Sahara XR.

Click to expand...

Thank you. That's exactly the info I was looking for.

This listing has been renewed

DesertSilver said:

The I've noticed is the further you seat a pellet the lower the velocity. I think it's because the pressure never gets high enough for Adibatic heating which increases the pressure dramatically. If the pellet moves to easily then will never see the pressure it would with a tight fitting pellet. Have you tried flaring the pellet skirt so it fits tighter?

Click to expand...

At the time 1982 ? when i bought my Tempest , Webley offered Free a pellet skirt sizer Measured from your exact barrel IF you sent the pistol into the factory to be measured and made for your barrel . That would have meant sending to UK and back to USA at my penny .

"What ???for a BB gun ??? " Foolish idea . !

This listing has been renewed

This listing has been renewed

Life member since 1973. Charles