Round 2 went smooth as butter. Love the Notos I have.

I started out looking at this as well when considering a larger caliber. I know for some it isn't practical, but I already cast 357 for PB stuff so now my intent is to get away from having to buy slugs, pellets or wire entirely.

Africanairordinance.com

Just went and ran it down from approximately 3500 psi until it started losing speed
44 pellets, still plenty of usable shots left but that's when it came of the reg.

APEX Rat Works UK

Happy 4th everyone!

I’m going to use this for my compressor setup and on a regulator tester, but as far as the gauges on the actual air rifle I prefer analog but for filling tanks and using a reg tester I’m going to try this one out, fingers crossed !!!

One shot kills - total destruction - mission accomplished.

To update everyone… I did end up getting my Chaser in .22 and splurged on a couple Maple magazines (orange 7rd and black 10rd).

It's a pretty good setup. If I did it all over again though, I might consider springing for .177 caliber and the Maple single shot loader + either the 7 or 10 shot magazine.

.177 because (1) my other guns and pellets are in that caliber, (2) .177 is cheaper for plinking pellets by the tin and I don’t feel as bad about 1/2 the wasted lead, (3) I sometimes feel .22 velocity is a bit lacking partway into a fresh cartridge.

Might try the single shot loader because it makes for a better shot to shot flow. The mags are great but I find detaching and reloading a full mag every several shots is slow in its own way vs feeding pellets singly but quickly, indefinitely. One of each mode is nice.

Hope that helps someone.

AimenStraight said:

Can I get this deal on the one I bought a couple days ago?

Click to expand...

1 = I don’t know who you are
2= This is for the flag edition only as stated and nobody purchased in the last week or two from me.

willy said:

Mike "thats not the little shop behind your house? Man bro>you are moven up"

Click to expand...

I have a full cerakote section just where the sand blast cabinet is , I dont get many who want it I have done my stuff and friends stuff
was supposed to do peoples guns here in my town but changed my mind I rather have my privacy
the shop bugs me because its not what I originally wanted, the 6x6 beams needed were not available and would of delayed construction a whole year

Airgun-hobbyist said:

Can't see the thing on that web site. Can you be more specific as to brand, etc, or provide a link?

Click to expand...

Yeah it doesn't have a brand or picture all I see on lethal air website is 12 gauge air shotgun and it says takes a week or 2 to build

I have one of those and need another. AOA??? ARE YOU THERE? B.

His future is so bright...

This was the Evol…. The lower 48 acre group are one magazine plus one shot from another magazine, and then I tried just using “kentucky windage” to see if I could even hit the sticker. Those are holes you see scattered around the sticker. At that point I decided I was wasting pellets and stopped. I pulled a cleaning rag through the barrel and wasted a few more pellets to season the barrel again and tried again. This time I got a semi-ok 4 shots and then it fell apart again and looks just like the original group. It WAS gusting some wind but the major issue I’m fairly sure is simply the considerably slower pellet speed. That’s the worst group I’ve ever seen from the Evol. It stacks JSB’s like the above Uragan’s groups (or better) at the same distance.

So, I’m just going to continue stocking up on JSBs for my Evol which it LOVES.

steve-l said:

Where did you pick up a new Ranchero? They are not made anymore.

Click to expand...

I called Utah Airguns about converting a used Ranchero arrow pistol I was considering into pellet shooter. While talking to the tech he recalled possibly seeing one somewhere in their storage. Sure enough, after a short wait, he got back on the phone with a new .177 in hand. I paid right away and I love that pistol. With a 2-6.5 Bushnell, shooting JSB exact heavies, I've shot 10 for 10 on paintballs at 35 yards.

OK...so apparently there was a Custom gun that JM made called the F112 Custom Sporter.

MTJunky said:

So I just received a hunter compact that I plan to mount my arken zulus on and am wondering if anyone has a starting point.
I'm completely new to airguns and dint have a chrono yes but would like to get out and zero for 50 yards.
Is there ballistic numbers for .22 15.9gr pellets so I can use range finder?
Any zulus setting I should start at?

I need lots of help with fx as its my first.
Do I just start at stock settings with 15.9gr pellets?
How high do I fill tank?
Anything I'm missing please fill free as I'm trying to rush this and take advantage of a free morning off of work cause of 4th.
Happy independence day my friends and thank you for any help

Click to expand...

First off read the manual (download it if you don't have one) It will tell you all you need to know . very complex gun .

Free shipping on order $1000 or more.
Offer is good from Friday July 4th, 2024 until 5PM July 12th, 2024.
This offer also include shipping for any Zbroia rifle (these are well under $1000).
If you order online, please enter the coupon "AGN FREE_SHIPPING_July2024" in the comment section (we'll delete the shipping the next business day).
If you call, please mention "AGN FREE_SHIPPING_July2024", to receive the free shipping.
You MUST mention the free shipping when ordering.

Order online at www.TopGun-Airguns.com or call 714-907-0067

Spend $250 or more and get free shipping excluding some special packaging on rifles or large items (perhaps compressors?). Call for details or if in doubt.
Use coupon code: JULY4SHIP24

You can always buy a new liner, they are cheap enough and the choke has become better for slugs in the heavys.

he’s been very helpful

That looks like fun

have both fx is much lighter more power and very tunable the akela sits in its case it is apples and oranges