Benjamin Benjamin Akela
- PCP Airguns
- 28 Replies
Great post! I will have to send the link to my friend.
Upvote 0
Did you see my sigguy link to the armory craft adapter plate? It screws in the hole for the elevation adjustment screw.So yeah...right !
Again, removing the factory sight leave nothing for any dot sight to attach to. Simple as that.
Unless you want to mill a flat, and tap two screw holes yourself.
Mike
I shot mine at 50 yards and it should do 1/2” groups no problem if I do my part. Here’s a quick target I shot. Kinda confusing groups cause It was windy and some I was adjusting scope. The jsb 20.89 shoot great. That bottom group is in a line cause my target was moving back and forth in wind. I did get a nice 4 shot groupThose a great groups!
Ive shot mine a little and taken some speeds. Shoots a little fast and loud. I’m trying to turn the reg down right now but it seems a little weird. I’ve followed the directions but it’s fighting me. It went down a little but I’ve had to try adjusting probably 6 times. Finally ran it all the way CC and it appeared to be going up!
SO now I ran it mostly CW. Will see how it goes.
Thank youJewelry stone setting burrs
Darn I wish I was closerThat would be great Chas, especially as none of us has one!![]()
I use liquefied bees wax as a lube solution without washing and my so's dropped into single digitsFor expediency I use Ballistol spray gently swirling in a rubber maid container and spread out on paper towels-I reuse the container
But
Rod B has a even better method
Totally forgot about it, thanks!!! Added to the top post! Yes that's a good option, the only problem is that it has only one gauge showing output regulated pressure, no gauge that would show input pressure inside the tank. Ninja comes with two gauges.Look up HUMA inline regs.
What are you shooting the 25.39 monsters at ? Just 22.07 at 1,010 fps is flying ! The 25's must be going about 990 fps ?Evening All!
Have enjoyed diving back into the hobby this past month or so (man has there been a ton of changes and advancements)!!
Currently throwing all my focus around 100 yard bench rest and have numerous contenders in the stable I am testing out.
One is a RAW HM1000x .22, put it through its paces today and one thing that blew me away was how well it grouped not only the 25.39 Monster Redesigns but also the JTS 22.07 (flying at 1010 fps!). 100 yards 40 shots. Apologizes for not posting with a measurement or thumb nail etc. to give a sense of size but measured 1.30 inches from far left to bottom edge of far right.
View attachment 479945
This was with a middle of the road scope, 24x magnification, rear bag and Atlas bipod sitting on a 4 foot long card table and a lawn chair so not the most stable setup.
Not sure if this one will make the cut for my intended purpose (have 13 more to put through their paces) but sure was surprised to see a fairly light weight .22 pellet group so well at that speed and distance.
Anyways just thought I would share my findings and throw this out there for other HM1000x .22 owners.
Be Safe,
Dr. Mike Long
I bought mine when Pelican had a 4th of July sale. It was only $270 USD with tax and free shipping.It is a nice case, so i looked it up, the damn thing cost 430 USD here
I'm only there for the donuts.Watch out @TerryE1 ... that first sample is free to just get you hooked![]()
| | | |