marflow 777 said:

just open the Google page and shop

Click to expand...

Oh that is a dangerous link! Curses!

That’s very interesting about your first ten shots being off target. Impacts dating back to the MKll’s (single reg guns) were plagued with slow first shots, but they were still generally close depending on how bad the symptoms were. I make barrels for my Impacts now and the most versatile barrel length is 560mm in .25. So putting cosmetics aside, after you retune your gun with the 600mm, it will be a little more versatile. You won’t have to be on full blown slug settings to shoot a 33.95gr.

Peskådot671 said:

Magpul PRS Lite on my Evol Mini 22.

View attachment 484175

Click to expand...

Very nice!

RBAZ said:

Can I upgrade my epoch?

Click to expand...

The barrel works in the epoch

saltshooter said:

wish it was longer. but I love it for archery

View attachment 489368

Click to expand...

Looks great for archery, and axe or knife throwing!

Seems like you just need to add some parts to get it to work. The trigger itself isn’t drop in but you need the additional parts.

There is a piece of me that wants one of these very badly even with all of the negative reviews… kinda weird on my part

JP806TX said:

Might want to PM this guy

OleTomCat​

over at GTA. He tunes Gamo. He might have specific information about where to get seals, spring, spring guides etc and how to take them apart.
or search specifically for his old postings on Gamo.

Click to expand...

Thanks very much I will keep it in mind in case the part I ordered in australia is no good. I found a youtube about how to take apart the Gamo, the person who sells the rams explains how to do it. I have hight hopes it will works. Thanks very much

I will never go on fakebook ever again!

Thanks
Buna 90 Duro is what I replaced them with. I still have a small leak which most likely is coming from the sealing surface of the poppet valve. If I can find a source to purchase this valve it would be helpful.

Good video.

woogie_man said:

That honestly wouldn't be a bad idea.


Then everyone would be on the same level starting

Click to expand...

People would complain because they need all the prep work. I bet the AAFTA guys would like to know the course layout for a whole month ahead and practice their holdovers. I sure would have.

I've seen a few ads like that around here and elsewhere. If I were to sell someone else's equipment, I'd just buy it from them and then resell. That makes it a one on one transaction with no third party involved. Third party has been satisfied prior listing the item and is no longer a complication. But, hey! That's just me.

Hello everyone,

OK here is my latest modification to improve the Trigger Pull on the Beeman Marshall 2028.

I want to state again that I am NOT a gun smith and the modifications that I am showing here are based on the information that I gathered from the internet.

This mod is making and installing a new “return trigger spring” out of .0340" stainless steel piano wire. After I completed the mod shown on the Walnut and Steel video and leaving out the “return trigger spring” , the trigger pull was down around 3 to 4 ounces. I could not accurately measure and after shooting the Pistol I just did not like the “feel”, or more specifically the lack of feel.

I like 1 to 2 pounds of trigger pull on all of my air guns so I decided to make a replacement “return trigger spring” . If you look at the first photo you will see that the “angle” or “opening” between the two ends of the wire on my replacement spring is a bit larger. Using this wire and that opening is what gave me the final pounds of pull. I could have reduced the opening and made it a bit less than the factory spring and that would have resulted is a lower pounds of pull required. I will shoot the Pistol with this setting and if I decide that I need it to be lower than the current 2-pounds, then all I will have to do is reduce the opening.

Hope this will be helpful if you own one of these Pistols,

ThomasT

ZekeZX10 said:

Hope they take care of that quickly

Click to expand...

I spoke to someone today and I just sent them over my info, so hopefully they get me back a shipping label so I can get this shipped today!

karl_h said:

For someone doing a lot of resizing of bullets, I can see the draw of that. You still have to handle every individual slug to load the tube though, should save some time over what I do, but not really that much. For the little I ever do, I just mount my single stage upside down, using lee bullet sizing dies, drop the slugs in the die, pull the handle, slug drops out and drop the next one in. Slugs/bullets are lubed of course. It's been probably near 2 years since I resized any bullets, obviously not a priority for me. Last time was doing 20 jacketed bullets for PB that were not uniform straight out of the box, tried sizing some and tested. Ended up no better and no worse than before...., but the bullets were much more consistently round. Shot the rest of those bullets up plinking without resizing them.

Click to expand...

You can buy some sort.of thing that goes.on the feed tubes to fill.them point down.. For $300.00 probably not worth it..I don't know if I can get cast a moa at a 100 yards consistently ....I might be swage or buying some in the future..

JungleMike said:

Gun Brokers now charges sellers and buyers a membership fee that really ruined it. but thanks!

Click to expand...

Yes because it cuts down on scammers.

Hi folks,
I picked up a used 1077 recently and it’s been fun to shoot. During my last outing though I had issues with the pellets jamming. I looked close at the magazine and it seems the top chamber of the cylinder never sits quite at 12 o’clock but is skewed slightly to the right. Considering I never checked prior to shooting it I’m wondering if this is normal? If not is there an easy fix? Whether it’s normal or not, does anyone make a more robust magazine for it? This mag is just plain cheesy and I am waiting for it to break.
Thank you,
Captain Fun out!

I think it's important to remember that bubble/electronic levels are "cant indicator" tools. All tools can be used correctly or incorrectly.
Ideally, they need to be properly set up to align your vertical crosshair to be perpendicular to the guns action(at level) and centered on the bore line. A tall target test can help verify results.
There are several methods(plumb line, mirror, etc...) to help accomplish this.
However, even if you are using a non-perfectly mounted anti-cant indicator device, you will get much more CONSISTENT results, which are MUCH easier to find a way to correct, if they do not meet expectations.

uladz said:

Awesome, video reviews are the best. Thank you for your time and effort!

Click to expand...

Should have read some of the manual online...lol

Realize now it needs just the one 18650...and we get two with the scope. I'll do a little more in-depth this weekend with hopefully some nighttime mouse poppin' in the woods!

uladz said:

Sorry, what was the question actually about? How to decode the SN?

Click to expand...

yes haha you guys are some hooligans!

Doc_pafumo said:

...but it did'nt continue...what happened?

Click to expand...

Sorry for the late reply. Yes it continued! Upon endoscope inspection of the dynamic block by Krale they found a defect that could only be related to production failure. Under warranty a new dynamic block has been supplied. Gun was rebuild with the new dynamic block and shots are consistently since then. Shooting 10’s again at 50 meters, good enough for me!

L.Leon said:

No ignorance on your part, just “my personal” preference is all…. “shot count” can be overrated and overstated particularly for hunting. My 33 shot count Atomic XR is plenty for ratting. Because getting 30+ shots on rats is extremely rare. There was a time I got 30 plus rats a night, but those days have passed. I prefer cyclinder PCPs and do have two single bottle guns… But draw the line on two bottle guns…

Click to expand...

Thank you for the explanation . Appreciate it!

Another fine XFT match in OKC, just look at the scores! Only one shot separate 2nd through 8th place. Now that’s some fine shootin’ right there. I saw a small deer in the parking lot when we pulled in just before the rain started to come down. Don’t know if it’s really brave or really ballsy for it to walk into to a gun range if you ask me.

The little tri fold pamphlet is the owners manual. I emailed them and asked for one also... that is what they sent me.