If it's the sight it's self broken or bad bent maybe look to replace

Sadly even that use to be easy to get part ain't no more unless AoA has one to sell

https://www.pyramydair.com/product/micrometer-rear-sight-fits-weihrauch-beeman-hw-air-rifles?a=3541

Overseas got them like bangcovk Kirkwood or chambers

Id hammer it straight first if I could ..lol

SteveV said:

No, that has been resolved via dielectric grease

Click to expand...

Have you given any thought on using one of these kits?


Or this one which is regulated



I have the unregulated one and ditched the hammer and tube, cut a 2240 tube down so I could have the bolt cock the gun vs having to cock the hammer and then load it. This also gave me a better hammer strike. Even with a 10" barrel it's putting out 18 fpe not at coil binding and only 2200 psi.

I also gutted the valve in it since it has a huge spring seat and stiff spring.

FYI...
910 has been relocating and moving into a storefront facility so he's been quite busy with that over the last bit. Could be the reason for the slow comms.

Just curious what you have found out. I just got the 30/32 bullpup

Probably puppies..

I have not had the chance to stretch it out to any distance, but my Evo in .177 is very consistent and very accurate in the 12 fpe.

nef003 said:

I'm far beyond saving then; because I have been proven other wise many times. The again; I lean more towards spiritual things than physical.

Click to expand...

Yes you are! You prove my point. You transfer human attributes to animals. It really is not that way, but you’re going to believe what you want to believe.

. or

I don't even degas while pumping. Just go slow and then take a break. Degassing means you have to waste pumps to get back up to tank pressure generating heat along the way. The first cigarette filter catches all the oil and moisture coming in to the oil/water trap.

drpietrzak said:

The issue, for me, is that it flattens the head slightly in getting there.

Click to expand...

I had the same problem. I fixed it with the a gas fitting from Home Depot. The fitting had a hard rubber cover on its threads to protect them. I cut a circle of it out and super glued it to the bottom of the sizer where the pellet makes contact. No more flat spot and I have sized thousands of pellets with them (.22 and .25 sizers). Hope this helps.

I just bought one straight from eagle vision For my Uragan 2 25 cal 700mm. The groups are good and consistent but I’m hoping muzzle break tuner can make it better. Haven’t got a chance to try yet but once I do I’ll post results. Things the one I got.

By not partaking…lol

Hello,

I believe my main issue at the moment is finding the correct regulator for the Ravello RX5. The video (which I haven’t yet watched) will hopefully be very helpful for the technician who’ll handle the installation.

Thank you in advance for any additional help or recommendations!

LeeThomas said:

View attachment 550359

Click to expand...

They purchased them all. Call them

WoodWelder said:

I do like the looks and the price is right......My JTS Standard is rock solid and is very accurate, when it breaks parts could become impossible to find will be my only concern?

Click to expand...

Maybe barra stuff will interchange ..

L.Leon said:

i have to say the for me the grips are non issues as they have not proven detrimental to me shooting any of the BRKs. I do own ARs and haven’t found enough of a difference in grips to matter to me… You may consider stuffing some weight inside the hollow of the grip to add the heft you feel it needs. Or simply go with any after market grip of your choice. Either way you’ve made a great choice of a PCP and I expect it will serve you well. Am seriously digging on the OD color scheme.

Click to expand...

Thanks again!! and I struggled for a long time about ready just to do what you did and go with black one and here’s why.It took AOA forever and a day to get some green .22’s in.They had green .177 for a long time,but I knew that wasnt gonna get it,even though in all reality a 17 fpe .177 would still serve my needs for this gun just fine..I just felt the need to go .22 as i live that little bit extra .( quite a bit actually). The black is every bit as tight as the green in my opinion.., thencarrying backpack and cute matching brk modmis what really sold ne I reckon.

Very, VERY creative Doc! I too look forward to any of your posts, as they get my juices flowing as it were.

ROCK ON!!!!

Anyone know what size this oring is for the male Foster fitting on the reg and where to order besides huben directly. Thanks

Peashooter said:

I am just all " soon the season i can no longer enjoy " Mode.
Followed by " where the hell did daytime go "

Click to expand...

Yeah, when I look at where most of Europe sits on a globe I do not envy you guys. Washington is considered pretty far north compared to other states and our days feel pretty short this time of year, but we’re actually further south than Paris is.

Dang that is really fast.

Been spending some time with a new to me Redwolf in .25. I picked this one up specifically for Extreme Field Target. Quite the shooter pushing 33 gr JTS at around 50 FPE. Since EFT closest target is 20 yards and distances are given, I used a Sightron PLR S3 scope which has a minimum parallax focus of 20 yards.
Although shooting a .25 is a bit much for my backyard, I’ve been creatively spreading my shots out in order to create my dope.
The total build weight is under 12 lbs as Daystates walnut stock is considerably lighter than the laminate or safari.
A very nice thing is my HFT, my EFT and my Bench Rest Guns are all using Sightron S3 scopes with the MOA-H reticle.

That's the only die I don't have, but I'm willing to work with you. PM me.

I mounted my thermal scope in the UTG Accu-Sync rings. They seem ok. Here there are next to two sets of rings one above the other. The Accu-Sync higher priceed rings are on the bottom.


Here are the specs for comparison. The Accu-Sync spec are on the back of the box on the top.


I can see the difference in quality. I feel good about my purchase decision. The Accu-Sync rings definitely look built better to handle recoil. It feels weird to pay this much for UTG rings, but hopefully they hold up long-term. They're pretty robust feeling. The machining looks pretty decent as well. The UTG Hi Pro LEs are fine for PCPs with low to mid-tier glass. I like to put my more pricier glass in decent mounts.

MikeVV said:

Me too...

View attachment 511709

Mike

Click to expand...

Love me a red dot on pistol for 25 meters in to 10 meters!

Here is a reminder of the Worlds website.

www.wftc2024.com

We’ve been getting a lot of emails about info that is contained on the site, or that was also contained in your welcome letter.
We are excited to welcome competitors from around the globe this week, and look forward to being your host.