purplepom said:

I'm actually getting the porting done now. Btw is that a 700 mm barrel on your Notos? If so I can you DM me where I can get one?

Click to expand...

Yes, it is a 700mm FX liner kit, PM me for details.

I have a Beeman Original 6, one or the rebranded Diana models, two each FWB 65 and 80, a pair of IZH 46m, several of the Daisy 747 and 777 models and a HW 75. Everything mentioned after the FWB's is a SSP and therefore recoiless. Of the spring air types I like the FWB's best, not as bulky and heavy and just shoot better.

Daisy was my first BB gun, I forget the model but it went through a lot of ammo. We collected drink bottles along the road and got a dime each. Kept us busy all summer. I think I still have one of those around here in working condition.

Rick H.

Don’t want my air brothers in trouble that’s all. I can care less how they die

I have the stock YH filter first with it's absorber element. I don't reuse these because the YH is splash lubricated and the element always catches some oil. Then I have a little bigger cylindrical filter housing that has a plastic cartridge inside. The cartridges came with charcoal in addition to desicant but I dumped that out and replaced it with color changing desicant. I replace the beads when they have absorbed moisture. I have a one way valve on the outlet of the second filter. That prevents me pressurizing the YH with the bottle and prevents me loosing the air already in the bottle if an O-ring on a filter goes bad. But you have to be careful dead heading the YH to be sure you don't trap air you can't vent if you put in a one way.

Anyone know the difference between an hw 100 and 110 models?

Non-Airgun topics go under the SOCIAL page.

Revoman said:

Just an observation and not a slam at all.
I see that there are what appears to be plier or water pump plier teeth marks on the knurled knobs.
If those are in fact teeth marks, it's very likely that you are closing the bleed valve much too tightly by using tools to close them and shortening the life of the Delrin by doing so.
The bleed valves should not need to be overtightened.
Just giving some advice, no harm meant.

mike

Click to expand...

Thanks for the advice @Revoman.
I do not consider this a slam at all
But those tooth marks are not from tightening, but from untightening the bleed screws when they are under pressure.
Tightening is by hand when there is no pressure on the screw before filling.
Edward

Bramezy said:

Where is the transfer port set? I was able to tune mine in 177 down to 10.3 at 900ish on low and then turn to high for 13/16gr. Turn transfer port to low and tune it there.

Click to expand...

Ok, I will give that a try. So set it on low and turn the hammerspring in, so it rises from 750 to 870ish?

I like to shoot 10 Meter from a bench on my patio with a Daisy 853. While my groups tend to vary in size depending on the time of day and my level of activity, the RWS R10s and the Eley tenex in 4.51 & 8.2 grains (when they can be found) seem to shoot much more accurate than anything else I have currently tried. QYS along with the H&N Match seem to do fairly well also.

Will get some photos up eventually. For now it's just a matter of manipulating my fingers go get a pellet into the barrel, yet below the scope base that extends across the top of the loading area

Birdog said:

The ballistic calculator works so well; I'm trying to figure out what to do with all the other glass I have. I just got my 3-12 LRF HD. Though I would like even more image quality (another $5k) The image quality is enough for Rats under 30 yards. But the BC is incredible. I haven't yet been able to get mine to synch via WiFi, but no matter I programmed it by pushing buttons on the scope and I've gotten fast at that. I'm on the fence about whether to get their new $2,500 version with thermal capability or to buy a dumber but better image quality thermal only that is better resolution.

Click to expand...

Thanks for the reply,

I'm just looking at it for daylight use only and recording my misses on Ground Squirrels I'm using Arken glass currently and am happy with it but....because my ranges vary from 50 to 125 yards my Zulus is a PIA, so it's on my Sapsan which is 25ish yards only. If the image quality on the DNT is equivalent to the Zulus, I'd be fine with it, but better is always better.

greenbeans said:

Generally yeah you want to set the macro to where it allows you to easily go from one tune to another. But the macro also moves the entire micro assembly incl the screw the micro is riding on, thereby increasing/decreasing the hammer. The way I understand it is that you can’t have macro on 16 (or higher number) and micro on 1 / macro on 1 or low and micro on 5 because of that. But I actually never tried…

Click to expand...

I read about those restrictions on macro/micro settings too. They are from the owner's manual.

purplepom said:

Wrong!

Doubling the tank volume at the same pressure does not exactly double the amount of air if you take the compressibility of air into account….

Click to expand...

I don’t follow the above statement

Maybe you meant to say:

Doubling the tank pressure at the same volume does not exactly double the amount of air…

Click to expand...

as that would track with the balance of your explanation.

Get ready, airgun enthusiasts – Cyber Week has arrived at Pyramyd AIR, and the deals are hotter than ever! For TODAY ONLY, use code CYBER1 at checkout to snag 14% OFF your favorite airguns.


Don’t wait – this deal ends MIDNIGHT TONIGHT!


But that’s not all… A NEW SALE is dropping EVERY DAY THIS WEEK! Stay tuned for fresh deals on airguns, gear, and accessories to help you upgrade your arsenal.


Check out today’s sale and mark your calendars for what’s next: Pyramyd AIR Cyber Week Deals.


Don't miss your chance to gear up and save big this Cyber Week! What’s on your wish list? Let us know below!


#PyramydAIR #CyberWeek #Airguns #Deals

I do think Barra missed the boat not offering a big high capacity BB magazine, They did bump it from 50 to 100 rounds ,, Got the 400 E loaned out to my Grandson so have not shot with the 100 bb magazine yet,,, The size of the Barra Mag they could easy pack 500 BBs in it,,, So simple, Would you buy a electric BB gun that shoots 100 BBs at a time or one that would shoot 500--1000 BBs on one magazine...
The engineers of the Barra , Need to watch the Blackbird video clip,,, What do we want? Please watch the clip..
Mike

And another one skirts the rules

Have you...say...looked in the various, online shops to see what they have for sale ? Many places to look.
Your gun, ONLY YOU...know what YOU want !

Mike

Not knocking springer's or pcp's, I have many of each myself. But there is a lot to be said for grabbing a modded 1377 all wood and steel carbine and a tin of pellets for a whole day of shooting. No compressor, carbon fiber tank or heavy spring guns to lug around. Plinking and small game hunting at it's finest.
I've aquired many 1377's and 1322's over the years and still have them all.

Thx
Ray

I have owned several types of binoculars over the years. My best have been made by Leica, Swarovski and Zeiss - your preference may vary!
Spend once, cry once vs crying many times with what did not suit me. My use is from close range 10 yds + (small game) up to several hundred yards for varmints and deer, etc.
Suggestions- visit a dealer who has many brands that you can handle - look thru at something a few feet from you to several hundred yards if possible and compare as many models as you can.
It is worth the drive to find a dealer with bino selection to do this.
Good luck

OkAirgunner said:

I did a search on Creedmoor and it came up but does not have a picture anymore.

Creedmoor Sports Bum Bag

Shoot and Reload with the Pros! Creedmoor Sports has served the Precision Shooting Community for over 40 years in Centerfire, Small-bore, Air Rifle and Pistol Disciplines.

www.creedmoorsports.com

Mark

Click to expand...

Yes, it appears as though they were having issues with the listing and it is available for order.

Motorhead said:

In the Field Target game ... We Live or Die by accurate D.O.P.E. and shooting LEVEL

Click to expand...

its not only about target shooting, its also when pesting and hunting for the freezer too

TC724 said:

No, i don’t believe so, had it as low as 1600 which is in the yellow on the gauge. Not sure how low it can go without damage

Click to expand...

Shooting to low of reg pressure can cause dammage to what???

i shoot 32g H&N and AEA 32g between 950-980 fps.
2nd best was Jsb ko 33.49 Fx hybrids were good with the stock liner but not the 1/18
Zen fly ok but have flyers Aea slugs shoot like pellets just incredible, 2nd is H&N 32g

I have the single battery EL2. All my cordless tools are 18v Makita so I knew I had to have one. It’s great. Fills my rifle in a little over two minutes and barely gets warm to the touch. The great thing is that it is small. Much smaller than a carbon tank and lighter. So much easier to pack in the truck. Everyone should have one.