Looks like a picture perfect day for a match. Looking forward to seeing the usual suspects tomorrow.

Chas

A check valve like that will save wear and tear on your compressor if installed on the input of your air filter. Makes it easy and efficient to allow the compressor to stop and cool down when filling tanks. WIth a check valve on the filter input the filter can retain the high pressure, basically you are only bleeding the high pressure hose between the pump and the filter. A big filter holds a lot of air, relatively.

Hi,
My Crown Mk II with a 500mm .22 barrel shoots the 18.1 gr pellets great! My settings for an Ave MV of 868 fps with 2.3 SD and 8 ES are:
- Reg pressure to 117 bar
- Internal Hammer Spring (IHS) adjuster sticking out of the carrier by 4 mm
- Transfer Port Wheel to Medium
- Power Wheel to 15

I should note that I have the FX Crown Slug Power Kit - but only use the new spring carrier so that I could put the 13.2 g hammer weight (Part #17003) in. I still use the pellet probe but am using the barrel with the slug (bigger port) port down.

Cheers,
Greg

How many tables were there? Were there a lot of visitors?

JimD said:

I got my simple brass dead head plug from Amazon. Works fine. But I have to use the gauge on the YH.

Click to expand...

Ordered one. Thank you!

Awesome i have the saber and the x2 ... excellent info thank you!

Reason I brought this up is that the ballistic apps require this information.

Crosman's scope brand, CenterPoint, came with magnum-power 2018 Benjamin Trail NP XL .22. Recommend 3-9x40AO, the CenterPoint 4X, on Crosman F4, was no good, replaced with barely used 3-9x40 from eBay for $50. WM

TomJ said:

New to HFT and want to buy a parallax wheel for my Hawke 30 Airmax 30 6-24x to mount on my Daystate Revere. Is the JD Customdesigns 9” bullet design a good choice or are there better options? I am using a Rowan single shot loader on the rifle. id appreciate your suggestions. Thanks, Tom

Click to expand...

I may have a wheel that will work
Pm me with your scopes parallax knob diameter in mm

Has anyone done busy with Lethal air? I am looking to send my rifle to them and wondering everyones experience with them if they have had any. I searched and saw some bad post concerning them but that was years ago!!

Try and remove barrel and change orientation

When I 1st started off with airguns I preferred my .22, AT44 QE. Much smoother, quieter & more accurate than the Marauder I also had. Flatter trajectory too.

My opinion here. If you’re looking for long range accuracy, I think the 350gr HP/BT is a good choice, if you push it fast enough. Tuning for a lighter, easier to push projectile at shorter range might be beneficial in some hunting situations (more shots, better expansion?).

My first adult rifle was an HW 97 .20 cal. I think you will really enjoy it as I did mine. I loved it and my first impressions were similar. After 15 years I sold it. It was getting too heavy and hard to cock for leisurely shooting. I initaly bought it for pesting, but once I entered the PCP world many of those heavy rifle got sold. Hold, hold, hold sensitivity is everything with this airgun. Resting the gun the same way regardless if it is from a bag or your palm is crucial.

blackbird1993 said:

Diana Trailscout Co2 Rifle, cal. 22 with 7 Shot Magazine.

Click to expand...

Krale got me my HW 97K. Now just waiting on the scope.

Yes I have been there before, but not purchased from the.

A new twist on conventional NRL target kits.....


NEW! Limited numbers available now from just $299 shipped.
More features, lower price.

Everything from 1/4" laser cut zinc plated AR500 steel
MUCH more versatile than conventional kits
Easily move stages with optional leg kits

Sorry I may have misspoke, I was thinking it was like the Career, Savers and Sumatras. I checked on my Shin Sung Fire, which is the predecessor to your Recluse. If it's like my Fire I used a 7/8 flatbar to unscrew the stock thru the buttpad from the action and then you can get access to the the receiver and remove the trigger unit. I took photos of on my old phone, I'll have a look this weekend and post pics.

ocpgunner95 said:

What’s a Notos View attachment 501623

Click to expand...

Maybe if you'll mod your Notoses less you'll have 68 cents for that electric outlet cover!

Patrick1 said:

My journey is similar, about 3 years with my Maverick. Tried to do it with cheap, then really good break barrels but found these to be quite tough to shoot accurately. Hold, pellet choice, many variables. Enter the PCP era! Cheaper first (Avenger) then FX.

Click to expand...

Well I started off with a break barrel, cheap, turned out the barrel was bent so I straightened it, have it shooting fairly well but not at the distance I needed, 50 to 125 yards, so, a Sapsan, that was better but had some issues, then a Maverick VP, the usual FX quality control issues, fixed it, then a pre destroyed Maverick that I turned into a .22 compact, let's call it a learning experience. I finally have my Mavericks working fine, my Sapsan is as good as it's going to get. Have a Raptor works well except for a darn leak I can't find, not fast so when shooting it, so it doesn't matter. Also have a Tequila Pistol, another learning curve, mostly my fault of being brain dead, it's pretty darn accurate at 25 yards, more accurate than I am. Oh and an OLD Daisy 717 that just shoots, need to fix the sights on it. Did a trigger job on it a long time ago, a sweet shooter.

Firewalker, thank you for the advice!

Scotty-D said:

Good shooting there Rick C.

Click to expand...

Jus think what could do with a "RIFLED" barrel - you know who hahhahahhaha

Hateful McNasty said:

I was looking some over to read and thought interesting a cometa Orion pcp bullpup was use in chapter

View attachment 501238

Anyway just thought fun to share

Click to expand...

Hateful! Where you been buddy? Things aint the same without you at the Hamster. You doin ok?

Tree wax is very hard so I don’t know how you get it to transfer to pellets without first warming or melting it?

Bud-sc said:

Never mind just came didn't even get a notification it was coming today from my informed delivery mail app...very weird....

Click to expand...

Well that's a good surprise lol