woogie_man said:

Details? You can't just post pictures and not say anything

Reg pressure
Power wheel
Barrel length
Ammo type and weight
Velocity

Click to expand...

170 Bar reg, max power wheel with factory HP spring, 28 inch barrel, Altaros 40gr 5.50 at 910 fps

I like to see my hits, on 100 or 300 or 500 .... x50 power for me is comfortable (with great optics).
I came from decades of archery - long range competition before I touch the airguns world, so the transfer was easier for me.

Long ago I have learned what that means training the brain first also being fit for the sport.
Train the brain for mental pressure, for heartbeats, for target wobbling like mirage for example, for seeing or not seeing the ring or just the center of it, train for weather in all conditions... and so on.

PEP3 said:

You can set it for any yardage you want, the picture is just the clearest at 50 yards. You will need to zoom down for close shots to get a clear sight.

Click to expand...

Thanks

A few thoughts.

Element Optics is said to be coming out with a 3x version of their Hypr-7. Presumably it will have side focus like the current 7x.

I have an inexpensive Monstrum 3x. Looking through it indoors at three yards shows a decently in focus image & no noticeable parallax error. However, if wanted to try to use it at three yards often I would find a cheap flip up cap & center drill a small aperture to see if the change in depth of field improved focus. Of course this will likely affect light gathering.

Lastly, I agree that 3x seems excessive for close range like that.

Hateful McNasty said:

Maybe a little pouch on your belt a to dump a tin in and pinch out a pellet as needed?

Military Surplus MOLLE II Frag Grenade Pouch Grade 2 ACU Camo

The Military Surplus MOLLE II Frag Grenade Pouch is constructed from durable and lightweight Cordura nylon material, so it will repel water and resist...

www.midwayusa.com

Click to expand...

Or like this

Airgunner79 said:

My other son & law likes the drs a lot. I was looking at that one for him eventually. Not sure on shot count on that one. Can’t be very much.

Click to expand...

The 700 has a 300~cc cylinder. If you're shooting slugs on the heavier side at really high power, not much, maybe 1 mag. I use lighter slugs fast and get about 2 mags. If you're using pellets at ideal pellet speeds, it's a typical 300cc tube gun. The power range is enormous.

King or Crown if traditional form, high shot count & high energy are your parameters. A crown vp can be gotten new in synthetic for 13-1400 But I'm assuming you want the walnut or laminate look. The king has a higher ticket, but crown is in the ballpark. And can pull 10±fpe more in .25 than Wolverine R.

That is awesome. Is it also tensioned? I am making a similar sized tensioning tube for mine, although no supression in the one I'm playing with.

castro510 said:

My power wheel is getting messed up from using an Allen key to turn it…it is alwyas supposed to be tough to turn? Oh and my gauge is filled full but not to the red

View attachment 525614

View attachment 525615

Click to expand...

Definitely something wrong with how this was put together - hate to say it but unless you want to get into disassembling it you just need to return it.

A few comments:

This is late but I did verify that the carbon fiber sleeve shipped with my Panthera .22 700 is exactly the same as the one I purchased for my Impact.

Check this FX site. https://fxairguns.com/rifles/the-panthera/
Scroll down to "Barrel" specs. 600 cm and 700 cm Pantheras ship with carbon fibre sleeves.

I bought my Panthera new from UA. It arrived with a carbon fibre sleeve installed. There was no special order involved.

As to quality control, the shroud on my new rifle was heavily contaminated with carbon fiber dust and shavings mixed with what appears to be silicon oil. It was a real mess that took substantial time and effort to clean out. The carbon fiber sleeve was out of spec. The diameter was .003" thicker in the middle than at the ends. Removal was difficult. All-in-all, I was not impressed.



JackHughs

Smssibz said:

I just returned M4 Cooper Compact. Brand new rifle cost $2k, had issues with velocity dropping & cold start… I sent it back to repair but do not like it back… so I am ordering Ghost in next two weeks.

Click to expand...

Good choice on the ghost! M4 has its issues, but you can get it to this (after sitting two days):

Did it cost me $ for mods? Yes. Did it cost me time and nerves? Yes. Was it worth it? Imho yes cause the thing is accurate as hell and feels/handles/shoots like a dream. Not gonna sugar coat it, took effort and already had to chase a slow leak on it but once you get it where it’s supposed to be it’s awesome. They should just knock off $500 for giving you a 80% product and making you take care for the last 20%…

zx10wall said:

I shot the Cajun Spring Classic in 2023. This is a great facility and they run a very good AAFTA GP weekend. If I were closer, I’d be there often!

I heard no Cajuns this year! We all benefit from getting there and experiencing this venue, atmosphere and the great locals. The folks that organize the Cajuns are very kind and welcoming! Whatever the issue, we all need it solved Love and respect

Click to expand...

AGREE AGREE AGREE

Correct... the settings are fixed by you in Advanced mode and pressure is not a consideration. Factory mode uses the table only for a starting point...
Advanced mode is intended to be a fully manual tuning tool...
Bob

MushroomPsyche said:

The term came from firearms. In airguns, the term is used more to indicate the first shot after the gun hasn't been fired in a while. This would also hint at the issues of this first shots and how it affects the point of impact (not necessarily temperature related) such as regulator creep and sticky valves.

Click to expand...

The term is questionable semanticly in firearms as well. Some firearms people think it's actually solidified or condensed grime/oils in the barrel which is scrapped off by the first shot. If so, then it can be happening in airguns as well.
One YT video that I saw said it's actually also a cold shooter problem- first shot for the shooter for the day.

Yes ... sweet rigs no doubt !!

I have and they were ultra quick. Will need to go through this site to request an RMA

Here is his email. Be patient. He is not always quick to respond.

[email protected]

Had a chance to try this out while sighting in my RTI Mora. Great target and a fabulous airgun to be working with.

Unveiling the secret of the LOUDEST Target with the RTI Mora

Floridaman2005 said:

That looks right, will this fit the bandit? What length are these?

Click to expand...

I was digging it out for you. I need to evaluate it and look up the Work Order before I can confirm its a good fit.

It would have been a Bandit carbine barrel.

Try lining the inner tube with 3M Scotch-Brite pads to quiet down the OEM moderator.

RabbitofCaerbannog said:

What kind of power are you slinging out of the texan?

If the Yokozuna can hush that down, definitely worth a purchase

Click to expand...

My Texan .308 is tuned for 330 fpe with a 150gr slug, max speed was 1042 fps 364 fpe with 150gr. it's not quite but the Yokozuna tames it down and without it it sounds like a 30-30,lol

They are a lot of work/time to do. I imagine that it would not take too long to just burnout after a while.

Nice!
And made in USA I see!

mike

.30 cal and shooting at people. That's deserving a stay in the gray bar hotel, years not months.
.22 LR kills more people than any other caliber. It is wise to bear that in mind when firing PCP's with more power than .22 LR.