redsqnm said:

Click to expand...

I was hoping you weren't that Nieve

Tear it down, draw up some prints, fill in the dimensions.

Just so everyone knows ,Mark is a great guy to deal with . He will take care of you . I have bought compressors from him and parts. He is extremely knowledgeable and will make sure you are taking care of quickly.
Rich Shar

WVaMccoy said:

I received my Delta Force Drs chassis today.
It took a little while to integrate the slug power kit and the chassis with my DRS Classic 700, 22 caliber.

I think she looks nice.

I can't wait to get in some practice!View attachment 521159

Click to expand...

Looks Awesome !

PP700SA has a loud bark , just a warning.

I'm always on the lookout for a big hollow point pellet that's accurate out to 50 . I will have to give them a try . I was going to try some H&N Baracuda Hunters also . Anyone have luck with the Hunters ?

When Crosman puts all of that in something that does not look like a plastic alien ray gun I might purchase one. And, the sling studs should be in the side of the stocks. You cannot carry a rifle with a pistol grip poking in the back with conventionally located studs.

Just some guidelines https://www.airgundepot.com/vault/articles/basic-airgun-hunting-guidelines/

My Vulcan 3 I have tuned to shoot 60gn slugs @ 954 fps / 121 fpe ....at 100 yards it's still moving at 837 fps / 92 fpe. I set that so I can take coyote out to 150yds and still have plenty to spare. I take max range I am willing to take a shot at and make sure the minimum fpe is met for whatever game it is I'm shooting.

Hammer spring might also need to be changed to something lighter when putting a regulator in the gun.

@blackdog899 - Welcome to the rabbit hole. I fill my unregulated Huntsman to 210 bar and shoot two magazines rinse and repeat. Find your high point on the curve and try that.

Hey guys , So I Installed a 700cc tank and a new 35" bull barrel , big difference from my old set up especially the barrel the old 25" barrel was not pellet picky everything I put through It at 60 yards was 1/2 group , the new 35" barrel didn't like AEA , JTS , FX 18g pellets threw a few flyers so I got the crony out and saw It was pushing 1054 fps from 940 with the 25" barrel turned the reg down to 100 bar now the pellets are traveling at around 950 fps with the same pellets I was still getting a few flyers which never happened before , now the new 35" bull barrel Has a fixed liner I think Its glued In place and Its made for pellets not slugs I'm thinking maybe It might get better with wear ( I hope ) so then I pulled out a tin of JSB 18g pellets and pushed It out to 100 yards and got a decent 10 shot group no flyers ( see pic ) . I think the barrel will settle In and give me 1/2" groups like my old set up did . over all I'm happy with the set up . Maybe the groups will tighten up with heavier pellets that's something Ill be trying out tomorrow .

Have a safe and happy Christmas guys .

Yes indeed ,great idea,and it works

If you are looking for parts or support, Palm Beach and Donny FL might be about it - you could reach out and ask them.

If you are looking to buy one, most of us would steer you to the Western Airguns offerings instead, and the LCS stuff looks to be about done in the market place, with minimal support going forward (maybe even none). It looks like the similar Western offerings will be around for a good while longer.

Airgun-hobbyist said:

Here's an easy way to get real close with that gun, if you have a set of dial calipers or similar measuring device. It requires three measurements and some math. First, measure the outside diameter of that scope's front bell, then measure the diameter of that barrel housing right by the break, and measure the air gap distance between the bell and the spring/piston housing. For the math, add the scope and barrel diameter measurements together and then divide that number in half, then add the air gap number to it. This will get you very close to the centerline.

View attachment 521127

Click to expand...

My SWAG math gives me 1.44" scope height, 51mm scope diameter, 16mm barrel and 3.1mm gap. 25.5mm objective/half + 8mm barrel/half + 3.1mm gap = 36.6mm = 1.44" scope height. Tks.

thom said:

I'm wondering if my trigger has been worked on already because it seems really "light", and as Dr Kralenstein pointed out the sight has been changed. So obviously some previous owner has done some mods. I'd like to know about the gray barrel band, who made it, and what, besides the color is the difference between it abd a factory band?

Click to expand...

You can pull the grip off and take a picture of the spring. We can tell by looking at it if it's been swapped out.

blackdog899 said:

Yeah the long line is for if I have to fill at the range with compressor hooked to truck battery. I think the shut off valve will work . I’ll find the parts on amzon now.

Click to expand...

Just make sure your components are rated for at least 4,500 psi or your max fill pressures you will see.

Its May and it still worked for me

Just keep in mind we are talking CO2 BB guns not political agendas that are gone or soon to be gone (Tyrant Hitler and the MP40, I have one). Just like the British Sten gun or the later Sterling Gun from a Monocracy Royalty King and Quean leadership.

By the way I would like to see a .177cal CO2 BB gun of the German assault rifle, Sturmgewehr StG44 as well. I really want to expand my collection of WWII Legends weapons (sub machine guns) .
Collecting dummies (wall hangers) are no fun and the real ones are astronomically out of reach.
But now we are off topic.

there very nice if you do a lot of Nite time pesting good video, i do some Nite time pesting not a lot but some
i had the Zulus 3x12 , 5x20 and 225 all 3 were nice but had their own range.
then tried the Oneleaf NV 500 Eagle with 2 lenses that filled the bill as it's nice to be able to swap lenses for long or short distance.
not as clear as say the 635 but as good as the Zulus which is good enough, if i was Nite pesting all the time i would more than likely get a 335 or 635

I was just looking for a break barrel and something with open sights.

Yes I do.

They need a bit of TLC



It is offcourse not a pistol

But a lot of fun shooting it.

So i spoke with Gregor the maker of the gun you can get 85 fpe but have to back out the screw allll the way out until you feel is not grabbing and is free spinning and have to be at 350 bars to get that 25 acp power equivalent

SSGFWB said:

I love the troll stroll.

Click to expand...

lol, thank you

Chukar60 said:

I can get 2 1/2 mags comfortably. When I go coyotes hunting or am in my truck it is not a high volume shot situation. Shot count past the point I am at is not a consideration.

Click to expand...

Sounds like the 480cc bottle will be a perfect set-up for me as well than. If u don't mind me asking what company did u get you're 480 from? FX or a generic Amazon or eBay company? (I have Tusing or whatever 480cc on my LCS-SK19) and hasn't had no problems whatsoever with it for a long time, (knock on wood). In obviously would have to get an ethics adapter though if I run one of those bottles.. my only concern would be clearance height and length i.e; depth and diameter of course. But other than that I'm definitely up for saving a couple pennies if I can. Oh and have you ever tried one of the other nor mags for our particular gun? I think they have a squarish one perhaps made by John and also a single shot loader I saw on eBay.. I think it would be a nice addition especially for the single shot loader. Also what do you think about my 300 box question? Will that put too much pressure on the internals? Or am I already answering my own question.. thanks again - SF