Not enough for me to care. The rest of the ports have to support the flow capability to notice it. I machined all my own parts knocking off huma and I got 7fps in my 22 700mm. If that's a gain you need, go for it. Your results WILL vary

You're an awesome Dad brother! Making memories like these are priceless. He's gonna love hunting and the outdoors thanks to you Dad, great job!

Barra looks to now have the newer 1100z gen2 ( regulated) as add to cart instead of pre-order today ..

It's lol ke 100$ less and I guess the gen1 1100z has a good following ..

Still a limited selection but I guess there ready to ship

UPDATE: that was one of the two o-rings on the gauge body. Using my master's in engineering (joke) I used an Exacto blade to cut away bulging o-ring and then gently pressed it through with a set of small channel locks with soft tape around the jaws. Worked. But again, I don't know how that happened. Good thing I purchased o-ring kits with the rifle!

davelarson said:

That really sucks, the good folks here will help out!
I don’t have any guns to donate, but I’ll make him a mini “know your limits” spinner target like in the picture.
Please let me know where to send it.
Edit: It’s set up with two cards to cut, and toothpicks, and there’s a bell behind the three holes on the bottom. The smallest spinner is smaller than a .177 pellet.
View attachment 524204

Click to expand...

Received today. Wow after we discussed some things he sends as a gift this present to my wife .
ygtbsm so that’s for me who can’t read these CODES Like me. you got to be sh tting me

I would love to take credit but I have a good friend who is a machinist by trade. I come up with the creative designs and put it on paper. He machines the parts. Its a beautiful relationship and he's a good friend.
Along with the above people it's a blessing to be able to make parts and custom stuff to your hearts content. Or atleast the ability of the wallet lol

Bud-sc said:

Actually cheaper than some of the other glass I seen!!!! BUT Holy crap March scopes are insane....yeah probably the best of the best ...no way I can get that!!!

Click to expand...

Don 't get wowed by the price. A bunch of them go up for sell often on the centerfire forums. I have several friends who have had various models on multiple guns who have none or 1 now. I have looked through only one that impressed me. On a hot , humid, bright sunny day viewing 6mm bullets holes at 500 yds a lot of guys with various high end scopes could not see holes. Through a friends 8x80 on 80x the picture was ugly., but the target looked like it was 1 foot in front of me. The turn off for me was shipping to Japan for repair which I hear is now up to months as in 3 or more. Looking through the others, they are fine but I don't see the extra price. Some models I have been told by friends have a very critical eyebox, the reason they got rid of them.Not the best of the best.

JimD said:

I traced two squirrels after I shot them and thought others might be interested. One was over a pound and one well under. So a little one and a big one. The smaller weight if from my fishing scale and the higher weight is from a kitchen scale. The latter is more in the normal part of its range so it may be more accurate.

View attachment 524105

Click to expand...

You obviously don't have enough to do Jim. Hopefully your rifle gets delivered tomorrow and you won't be so bored....,.

Most bottles are m18x1.5 thread. Some are 5/8-18 UNF.

If you're planning to use it as a fill station/buddy bottle, you'll need a valve or regulator. Something with an in and an out nipple, as well as a pressure relief screw.

SM3751 said:

The instructions in the Huma manual that reference a different model in regards to the spacer refer to the Fortitude and Discovery. Get yourself a long dowel or pvc section and remove all internal components; the spacer is in the tube still

It does not sound like you’ve removed all components yet. The spacer is very thin, and you’d miss it in reflection staring down that tube.

Then, as others have said, port the valve. I was stubborn, and it was my last step when it should have been the first on my own p-rod.

The post by Weevil is a step by step to the exact result you want.

Click to expand...

I see the spacer now. Thanks. Can’t seem to get it out without removing the valve. Dad decided it’s not worth the trouble. Listing reg in classified section.

Wow! 600.00 for one.

Think I’ll get by with my 40.00 Amazon cheapy for a while longer lol

My upper and lower rail on the m60b had zero issues with multiple different ring sets and mounts.

Everyday pipe thread tape used here ..

Pedrotms said:

Also, there was no click indicating that it was cocked.

Click to expand...

Then check the trigger screws. Something is off there and the sear is either not engaging (if you feel the spring when letting off the handle) or is stuck and is keeping the gun engaged (if there is no spring tension when you let go of the cocking handle).

Using the advice provided by this forum I rebuilt my D34 using new Vortek seals. I did not replace my PG2 Vortek spring and guide but will consider it moving forward. This solved my problem with stuck pellets. Now shooting >800 fps with tight grouping and consistent velocity spread. I'm a happy camper.... Thanks guys!

Here is a string from talonp

I don't fill my PCPs much if any past 250 bar. It's hard to do filling from a bottle which is my strong preference. I've purchased moisture filters and a fill extension from Amazon and a few other things. The only issue I've had is an occasional O ring failure. I fill my bottle to an indicated 300 bar but when the air cools I am lower and as I fill guns it falls further, of course.

I hope I get many more days like this god is truly blessed my life

Jay308 said:

It seems normal for him to not deal with issues, thats what stopped me from making a purchase. A good company is measured how they deal with issues after the sale, anyone can prep it, through it in a box and ship it fast. SPAW is the same way, have an issue…crickets.

Click to expand...

Same

BC,
Check out "how-to" videos on Orion the Iguana Hunter's website. Short, easy to follow instructions for installing his version of Impact magazine wheel should be helpful in any Impact magazine function understanding. IIRC, videos are found on page selling his FX magazine replacement wheels. WM

FYI, this season the Texas leg of Airgun Of Arizona's national Grand Prix series is combined with our TEXtreme Field Target Rifle & Pistol State Championships for the first time. Besides uncomplicating my life considerably, another side-effect of this change will be the richest prize list in TEXtreme history for the podium placers in the Rifle and Pistol competitions.

More details on that in this link-

Happy Shooting Y'all,
Ron

rdtricks said:

What is the biggest mystery to me has to do with the manufacturers and vendors not making said O-ring sizes known. My guess is their attempt to make additional sales at inflated pricing. GX compressors for example want $9.99 plus shipping for the 'Quick Connector' O-rings (2) and will not inform me or the actual size with sent an email. Maybe I'll just order a new Quick Connector for my Fill Whip.

Click to expand...

"What is the biggest mystery to me has to do with the manufacturers and vendors not making said O-ring sizes known."

Me too.. it's a joke .

Like a certain oring they hide that fact is $12$ at P.A (+ 8$ shipping)

Another is how many have that gun like here at age and never reply with a measurement or something to a post asking "does anyone know what size thei guns o ring is" ..lol.

Nope hundreds of guys with that gun but not a clue or can't just check there's to reply . Especially a simple probe one ..lol

Thanks I ended up finding that.

What pellets/slugs are you using in your barrel ?

I have .22 with 800mm heavy liner and get around 1000fps with 40grn slugs. Reg pressure 155 bar. I have just about every factory upgraded part. Power block, heavy hammer spring, tungsten weight, lighter valve spring, huma high pressure regulator, nsa pin probe.

I am considering .30 cal with 800mm heavy liner with 70grn or 68grn what is to be expected power level in FPS or fpe?