Threads

rcrochte · Mar 8, 2025

DLNE0 said:
My brother has one, Silver/Chrome whatever, only a few months old, no issues apart from hits a 3 inches to the right of where he aims at 5 meters.
Maybe its just a very close quarters gun.

Maybe the ammo he is using. Every barrel has it's preferences.

boscoebrea · Mar 8, 2025

I'm going to remove part 33 and see what happens. It's an adjuster,but I may be better without it and just get used to the trigger. When it sticks, it can throw your shot off.
I'm sure they made that trigger that way to save money or they are just a bunch of drunks

Tisbutascratch21 · Mar 8, 2025

Tisbutascratch21 said:
I can attest to Diablo Exact pellet accuracy. I use

JSB Diabolo Exact Jumbo Heavy .22 Cal, 18.13 gr
Not .177 but I cant imagine they would be TOO much different maybe the .177s are even more accurate if thats possible. I stack these on top of each other in the same hole its ridiculous.

boscoebrea said:
You switched calibers on me, there can be a big difference in .177. If you can shoot well enough, you will see it. Each rifle is different. I'm glad you found the best one for your .22. Some of my .22s, like the Falcon 13.43, . I think the .22 is less particular, anyway; that is my experience.

Fair enough. Id just find a manufacturer that is known to have consistent quality, get a few different weights 4 groups of 5 with each to cover any variables and go from there. Thats just me. Also I did notice a huge improvement in accuracy when I gave the barrel a very careful but uniform polish using 4 mops and J&B bore cleaning compound. You have to be very careful obviously, there is a video of a champion marksman shooter on youtube that covers this process exactly. Was already an accurate rifle but it took the group from a half inch at 40 yards to stacking pellets. Plus its far easier to clean now. I wish I could help more but its worth a look.

blitzen · Sep 8, 2025

Hey Sky King, just saw this don't know how it was missed in my notifications. I did pick up a red panda in .25 caliber. Don't see much at all on the .25 mostly .30 with some .22. I will try to call you later. thanks again for your reply.

Dave

kaylaindy · Mar 9, 2025

kwaping said:
Precision up to 100y, reliability, and versatility are what I'm looking for. I'm not adverse to electronics but not having a battery to charge is a bonus.

The Ghost is pretty good too. The M4 and Skout can do caliber changes through. That part is great.

beerthief · Mar 9, 2025

At those speeds and 20 yards you would just knock the squirrel out walk up and finish him off with .177 .

Talon Tunes · Apr 10, 2025

Uragan 3 .30/600mm
700mm shown in pic.
Thanks,
Tony

Airgun Technology AGT Airguns - TalonAirguns

Airgun Technology offers advanced air rifles with cutting-edge features for the modern shooter. Built for performance and reliability. The AGT air rifles are maintenance free "Set it and forget it" Expect superior accuracy and exceptional build quality. This is the rifle that will shoot exactly...

talonairguns.com

Rickster · Sep 3, 2025

RabbitofCaerbannog said:
hey buddy, yes the manual does say the 1/4 turn CCW.. but thats a generalized approximation. Close the reg ALL the way shut after you degas.. Then regas the gun, to 4k+. then SLOOOOOWWWWLY start turning ccw. i'm talking passing a kidney stone slow. And you'll find you can start as low as 1400-1600. This is how i do it. I've had creep, but, i've noticed it's AFTER i've set to a pressure, shot for a while, and change pressures.. Since this last degas, regas, reset. Mines solid at 1800, NO creep over, The AV reg does seem to reset slow, You shoot, it drops, takes about 30secs to truly equalize to set pressure. Try degassing, Go ALL the way Clockwise till you can no more. Regas, Open slower than cool tar flows.

let me also say, it can take a second for the reg pressure reading to catch up to the adjustments youre making, Turn CCW a bit,then stop... wait. it should equalize in a little. once it does, move up from there.

Yes hes actually setting it to 3000 in stead of 2200, hes turning it too far. When ever you get a new part and it does the same thing, that tells you, you are doing the same thing wrong.

CharlieF · Mar 8, 2025

NOTOS will kill them quickly and as humanly as your accuracy allows. At the range you are talking about and with a headshot, they will never know what hit them.

Iowa Airgunner · Mar 8, 2025

Hello . I wish I could make it.

Bowhunter73 · Mar 8, 2025

Congratulations on a good hunt and shooting, beautiful rifle by the way.

NCAirLine · Mar 7, 2025

Is there a parts diagram of the Notos Dream Valve TK somewhere? I've done a few searches and not found anything.

RaidPoncho · Mar 23, 2025

That’s pretty dope! I’ll have to look at this since losing strelok

Sparhawk77 · Mar 7, 2025

I found some posts saying the Nikko Stirling was not recommended for springers. I bought a Sightron STac from AoA that was recommended for springers like the HW97.

Max115 · Mar 7, 2025

Yes, I agreed. A sign of hesitation due to lack of practice. I will redeem myself and get my shots on target in the near future, lol. Thanks for watching.

JackHughs · Mar 10, 2025

humbled.ag said:
I can imagine the relation between the Ocular diameter, and objective tube diameter have an important part the play. With a large objective being necked down to say half it's diameter to meet the erector tube, this would be a cause for more pronounced error. My sightron with a 50mm objective tube, and 30mm erector tube seem to be more sentisitive to eye placement and proper focus to ensure proper parallax. Another sightron, with a 56mm objective, and 40mm erector tube seems* to be less sensitive, all other setting being equal. This is anecdotal to my experience.

What does the math say about this scenario?

Hi.

The diameter of the scope body (the erector tube?) does not factor into either the Maximum Parallax Error calculation or the Actual Parallax Error calculation.

Sensitivity to eye placement is a function of the diameter of the scope's exit pupil. Most quality scopes show the diameter of the exit pupil in the specifications.

JackHughs

JaceSpace1369 · Mar 29, 2025

Advance said:
You welcome. Here is a video I took with the tnc335r. It shows how well the optic works for tracking small critters on the move.

For a 335 that looks good! That looks like such a leap in quality over the 225

Hornclayton · Jun 18, 2025

steve123 said:
Growing pains...

They bought a different honing machine so maybe putting out superior bore finish nowadays.

Yeah I heard, and american made this time. Costly problems. Wish they would keep their dealers in the loop better. Theres a demand and im not a fan of china (aea) being the only company with that honing machine so I gotta support a US company. I think similar about RAW sometimes.

Bowhunter73 · Mar 8, 2025

Great video and shooting

darrylray · Mar 16, 2025

Hobbyman2007 said:
For the last couple years I’ve kind of vanished from the airgun forums / community to follow other interests and hobbies. Now over the last few months I’ve come full circle and rediscovered my love for airguns and modifying them. I’ve jumped from brand to brand, and have held onto my favourites and let the others go. Now for the serious question. How many guns can one own before it becomes apparent that you simply have too many? A few pics of why I’m asking the question. And feeling a bit shameful that that’s not the entire collection.

View attachment 544839

View attachment 544840

View attachment 544841

Boy — I think you're close! Over the past 40 years I have purchased more guns than you have displayed in your pictures, and I have finally reached the end of the line. When your toys are just sitting on the wall or in a closet or safe for years on end without being touched, it's probably time to start liquidating your least favorite and least used guns to either make room for something newer/more powerful/prettier, or easier-to-access and shoot. From my experience, guns don't appreciate at the rate that we were always lead to believe. And hobby communities like air rifles, Ham radios, astronomy, astrophotography, etc... are no longer growing in popularity. The current generation of young people would rather play video games or produce TikTok or YouTube videos than actually go out and physically participate in a hobby or sport like older generations did.

stoti · Apr 27, 2025

Our best bench is made with Trex type decking on top and pressure treated wood underneath. It's been in the elements for years and is still perfect. Manufactured "wood" like Trex is expensive but we got ours on sale at Home Depot because they had some odd lengths. It ended up being cheaper than regular lumber. Our other two benches have laminate flooring on top. Not as durable or weatherproof but it's tongue and groove is nice and flat. If you want to use plywood, coating it with spray on, truck bed liner will make it impervious to the elements and very durable!
Stoti

greenbeans · Apr 2, 2025

Boss429 said:
and if they don't?

muradtexas said:
I guess we will be pleasantly surprised. But in my experience, many companies like to price things based on "what the market will bear".

See, this is the thing. There is tons of studies, empirical data based on real examples of countries imposing broad scale tariffs over years and years. Undisputed in academics. Will there be a handful of businesses not taking advantage? Sure. However, the other 95% will. But somehow we still want to “hope” that it won’t happen to us. It will though. I guess humans really want to believe what they either fear or hope to be true… anyway, I’m drifting waaaay too far away from airguns so tapping out

ToddGeddes63 · Mar 7, 2025

Cornhole!

MOE.LB · Mar 10, 2025

The cats under my house are pregnant so I'm sure I'm helping them a lot today

steve-l · Mar 12, 2025

No PCP pistol is really adequate for large animals like racoons and coyotes with the one possible exception of the GK1. Get a rimfire and be done with the problem.

Threads

Threads

JSB Diabolo Exact Jumbo Heavy .22 Cal, 18.13 gr​

Filter

JSB Diabolo Exact Jumbo Heavy .22 Cal, 18.13 gr