Threads

1900colt · Mar 10, 2025

LayeredOgre said:
Exactly my thoughts! I’m no expert but as far as I know there were repeater muskets around the same time as the Girandoni but I don’t think they saw the same level of use, not like it really caught on either though. That would make me think yes, the Girandoni had a leg up in terms of repeaters. Same as today cost + “weird” new tech makes things go in a different direction or take longer.

There were a few designs, and if I'm not mistaken, Girandoni injured himself trying to make a repeating firearm.

You had rifles with rotating barrels, and rifles that had multiple locks in a row with charges loaded in front of each other. That just looks sketchy

. There were the pepper box pistols too, some of those were rather large calibers.

It was an interesting time seeing how things progressed to where we are today. Heck, we went from big bore airguns to BB and pellet guns and now back to big bore airguns

Nkcaudill · Mar 10, 2025

I’m in Indiana and shoot Nrl22 and PRS with my CZ 457 and FX Panthera.

jackp_MDB · Mar 9, 2025

Motorhead, can you expand a bit on the "faster" issue. My understanding is that regardless of the FPS, a 1:25 for example will always spin the projectile one time each 25 inches because that is how the barrel is "cut." If you had a 25" barrel and a 1:25 twist rate, the pellet, etc. would revolve one time whether it took .1 second or 10 seconds to leave the barrel?

RickH · Mar 16, 2025

That’s a beautiful rifle and clearly shoots well. I’ve come to expect that from Anschutz. I’m still trying to get within sight of being as good as mine.

Rick H.

bustachip · Mar 22, 2025

KWK said:
I understand but I'd rather not talk guys out of making the proper tooling for their hobby lathes themselves.

I agree people starting out need to learn how to use HSS tools and also sharpen a drill bit if needed. Plus most people aren't going to spend the kind of money to get quality inserted tooling and carbide tools.

JaceSpace1369 · Mar 14, 2025

Floridaman2005 said:
I figured out a lot of good information over the last few days and have been very successful tuning. The biggest piece of the puzzle that I was missing was learning about harmonics.

I saw a video on tuning that made so much sense and changed my perception of tuning. I found max velocity (at 80/120 regs) and put the power wheel on 16 at max velocity and shot a 3 shot group (around 900 fps). The. I dropped power wheel to 15 and shot 3 shot group. Then 14, 13, 12, 11, 10…all the way down to the low 800s, noting group size for each power level. Found that at power level 11 (850-860 fps) the groups got VERY tight. From there I played a little with the micro-wheel to fine tune the groups even further. Once I was completely satisfied with the groups, I started playing with the valve to see if it could get even tighter.

The results were fantastic; though the SD and ES weren’t the best. But my groups and consistently were wonderful. I guess at the end of the day that’s really what I care about. I want to hit iguanas in the off switch. By tuning this way, the gun is extremely efficient, getting way over 100 shots on a 250bar fill. It is as accurate as I’ve ever seen and makes me totally confident in.

Had one of these pellets stray just a tad (could have been the pellet) but still incredibly happy with the result. This is 10 shots at 25 yards. Of course 25 yards is only the beginning, but I’ll have to wait for the weekend to find a place to shoot out to 50+. The top groups were 5 shots each and were basically in the same hole.

View attachment 547147

View attachment 547148

Hell yeah bud! Good on you for figuring it out! Funny you say that about the speed as 95% of 900fps puts you at 855fps! Enjoy your gun and those groups are great!

AirNGasman · Mar 10, 2025

L.Leon said:
Though I like my Ghost Carbine, it is not a light gun…

When I got the chance to handle and shoot the first Ghost to come into the U.S. (before they were available for sale), my very first impression upon picking it up was "Man, that's heavy". Truth be told, I meant for its length.

Considering weight and length were mentioned in the original post of this thread, and the OP's screen name suggest they may be of small(ish) stature, apparently some folks not only hear what they want to hear, but read what they want to read.
.

SakoSierra · Mar 12, 2025

dgeesaman said:
On new equipment that is disappointing.

If it shoots great though that’s what matters to me.

I bought a used Anschutz 54 (22LR) from a friend because he took delivery and realized the barrel was no longer blued, it was spray painted black. We shot it, it hammered, and I got a hammer rifle for pretty cheap. Looks don’t matter when eyes are focused on the results sheet.

The nice thing about the guns with a little wear…. You use them more and care less about the little things. I have plenty of safe queens that I hate to shoot. Plus this gives me $200 towards another gun…trying to decide on an arrow shooter! The bush pig or the M600…..can’t decide

stovepipe · Jun 2, 2025

Hi forrest342. I noticed that you have an Atlas CAL on there. There is a simple way to totally transform the functionality of the Pod-loc. You'll never need an 11mm socket wrench again, and you'll never bash your knuckles again when trying to loosen the lever, and you can easily change the tension/friction on the fly with very fine adjustments, and you will have lots of leverage for a very hard lock. Basically you will have the full range of tension/friction adjustable on the fly without having to use any brute force -- and it stays where you put it until you change it.

It's not something I sell. It's just a Nickel-alloy belleville washer and a carbon fiber drag washer, so two mods as described in this thread:

Authentic Atlas CAL Gen2 bipod -- simple mod to make the tension/lock lever work like I expected it to

I bought an Atlas Cal Gen2 bipod many months ago. My specific model was the CAL BT69-LW17. I was very dissapointed with the way the podlok lever worked. I expected the tension to increase/decrease as I turned the lever and for the bipod to hold whatever tension I set it to. Atlas CAL bipods...

www.airgunnation.com

Cheers.

stovepipe

JaceSpace1369 · Mar 9, 2025

Headshots said:
I grew up in Idaho and we would often take dirt roads to find a nice spot to shoot . At times we were on a farmers property. They were usually really nice and say we could shoot there but asked us to "clean up our mess and don't shoot my trees " . I see it often and hope that people are shooting their own trees and not someone else's.

I understand, no one else's trees were harmed.

RallyeX · Apr 5, 2025

Took my wife today for her to try my pcp rifle. This was her first time and she had a blast. Now she definitely wants her own rifle! It was pretty windy today! I am looking forward to next Sundays match. Unfortunately have to work Saturday.

RabbitofCaerbannog · Mar 9, 2025

The AVS and VK are extremely impressive on immediate expansion. relatively gargantuan short cavities. The hp slug is not to be ignored. Still. A decent channel and cavity on impact, however traveled a decent bit further than the other 3.

Laeljon · Mar 9, 2025

Shooting NSA 29gr dished 925 fps 54 shots on fill 120 reg.

daddypaddy · Mar 8, 2025

lol yep
maybe loading .22 as well

SpindleB · Mar 9, 2025

By the look of that bulging oring the valve was not tight to the tank. Regardless of duro, if the valve is seated flush there is no room for the oring to bulge out like that.

The other possibility is too thick an oring preventing that flush seal.

6gun · May 20, 2025

2Ten said:
This could be a dumb question. Don't worry, you won't hurt my feelings.

Can a Crosman Vantage NP (Model 30021) be converted from 177 cal to 22 cal by swapping out the barrel?

Yes, and I have one

my piston failed and I hated my 22 trial np(and most folding barrel springers) , so I took it apart. Sooo there's an aoa adjustable trigger and a whole trail worth of parts in my office.

Fish_dip · Mar 11, 2025

DonnyFL said:
Upgrade your FX Airguns Panthera or Dynamic air rifle with the FX Chassis Conversion Kit, designed to seamlessly integrate with the Saber Tactical King Chassis. This kit provides everything needed for a smooth installation, ensuring enhanced functionality and a premium shooting experience. Check it out here and the Saber Tactical Chassis here.

Kit Includes:
✔ FX rear plug
✔ Two-piece King-style safety
✔ Mounting screws
✔ Safety spring and detent cover, and screw

The Saber Tactical Chassis for the FX Dynamic Variants of Air Rifles will turn your precision airgun into the ultimate Benchrest or PRS / NRL22 rig!
This high-performance upgrade will turn your gun into a competition beast, ensuring you stand out in any match. To extend the rail to pair with 700cc bottles, pair with the Saber Tactical Extension Rail For FX King Chassis

Key Features:
Toolless Adjustments: Easily customize the cheek rest, buttpad, and length of pull without needing any tools.

Convenient Design: Equipped with a quick disconnect (QD) sling swivel on the buttstock for hassle-free sling attachment.

Versatile Rail System: The front rail includes both Arca and Picatinny options, while the side slots are M-Lok compatible, perfect for adding weights or other accessories.

Color Options: Available in sleek bronze or grey finishes.

Enhanced Grip: The jimping pattern underneath the rail ensures a secure grip with shooting bags.

View attachment 545131

Beautiful air gun.

doberschelp · Mar 10, 2025

Agree 100% with the OP. I have several FX, Daystate and RAW air rifles and after tons of shooting I've come to the conclusion that all of them are equally accurate and way beyond my capability. The big difference (aside from the tweaking) that I notice is that some of them are just plain easier to shoot than others, primarily due to the triggers. Prime example being the Daystate electronic triggers that for me are just sublime . The RAW TM1000 mechanical trigger comes close though.

Trucker3573 · Mar 9, 2025

1900colt said:
Was it [email protected] that did not work?

Yeah came back as an undeliverable address

Max115 · Mar 10, 2025

I was able to go out the other day to try out this scope. It was windy and cold but I managed to do some target shooting and recording at 30 and 50 yards. I found an "issue" when trying to range the target and I wasn't able to see the flashing laser in the daylight; in addition, the laser didn't line up with the aim box. However, I was able to test out the ballistic calculator function and it was working properly. Pretty easy to range at a distance and with one click, I was able to use the new aim point as shown in the scope. No more guessing the holdover to shoot my target at different distances.

Granted all the data are entered correctly into the scope, and the ballistic calculator will quickly calculate the new aim point. Pretty convenient. I can't wait to test out the scope on starlings, rats or even coyotes.

Stay tuned for the next video upload this Friday. Thanks.

Hynzie · Mar 12, 2025

im totally down for the open sights ,i know there is a few pcps out there with them ,id like to see this option more

JaceSpace1369 · Mar 8, 2025

Leadpills said:
Sorry I missed putting the .177 part in there

NSA
Griffin
Varmint Knockers makes frok 13.5gr - 19.5gr in .1771 and .178.
HN
ZAN

Emjay4248 · Mar 25, 2025

RadioFlyer said:
What is yours is now her’s as well. Invite her to shoot all of them with you, educate & share with her all that you have gleaned. Knowledge is not only power but a wonderful thing that will spread like Wild Fire if you open your heart. Your children will cherish you for it; I guarantee it.

P.S. I wouldn’t be surprised if she picked the CRKT!

Well said

imtrigerhapy · Mar 9, 2025

MAUMAU said:
The cameras will show you what killed your poultry, but a better solution is electric poultry fencing. This inexpensive fencing is available from Amazon etc.

It will keep fox, raccoon, coyote, etc out and your poultry safe.

We do have cameras. Our outside dog had a front leg broken bad and amputated since then he has become an inside dog and has no desire to stay outside so till this new pup gets a lil bigger its up to the pew pews this lil guy 3 months old a great Pyrenees hopefully he will be a good guard gog

Bandito · Mar 13, 2025

Love most all dogs. The only real cost of having a dog is when they go. I contend there is a hole left that never completely goes away. It melts into the background and another dog can cover up the hole. But it is never fully filled in. It is the way the Big Guy intended. In my outlook at the Hierarchy of life, Woman is the closest and dog immediately next to her. Kids grow up and move off. Dogs stay until they die. Be Well Brothers, Bandito.

Threads

Threads

Kit Includes:​

Key Features:​

Filter

Kit Includes:

Key Features: