Threads

grouch-o · Jan 19, 2025

i hope you all saw the mega short PCP DERRINGER, as well. =)

JungleShooter · Mar 16, 2025

darrylray said:
I'm 73 years old and I have been collecting high quality air rifles for the past few years in the hope of setting-up a 50-yard outdoor range at my second home. Unfortunately, at 73 your body starts to betray you and the things that you had on your bucket list don't seem quite as obtainable as time goes on. I am now in the unfortunate position of having to sell my entire air gun inventory including an FX Impact 3 (Bronze) new and unused, an FX Crown (IV8888 version) serial number 88 out of 100 set up for shooting arrows, and an Air Arms S510 Ultimate Sporter with laminated stock plus accessories. I am hoping to have them posted on the Classified section here with pictures within the next two weeks. Life can get in the way of having fun, it can deal you some financial blows that you have to deal with, or a host of other issues can arise that cause us to change our plans, however disappointing that might be!

Darryl,

I am very sorry to hear of your recent blows to your health and your airgunning plans!

This must be difficult. I feel with you.
Please, hang in there.

Matthias

EPG · Jan 16, 2025

For future reference in this thread, all three of the holes in the GX CS2 block are for 10mm fittings - all except the hole for the brass bleed screw.

A quick and dirty source of 10mm fittings is from a Chinese hand pump that many of us used when 1st getting into PCPs. Otherwise you can source 10mm fittings and gauges on AliExpress.

-Ed

elguapo99 · Jan 19, 2025

Here's the AT44 o-ring list that I found several years ago. The barrel o-rings are #608. Here's a link to them on O-rings and More: https://www.oringsandmore.com/metric-buna-o-rings-7-66-x-1-78mm-minimum-100-pcs/

PasadenaMike · Jan 16, 2025

it’s always been beside me since the s&$t hit the fan.

duchunter007 · Jan 17, 2025

I have the Garmin, and it is easy to set up and user friendly!

Franklink · Jun 29, 2025

manabeknives said:
Excellent shooting!
You have really refined it down over the months!
The "Cherries" look fantastic ...how bad do the "Lemons" look?
Looks Sweet!!
Mike

These two were part of a 234, and that was the high over a couple days. I've shot 12-14 cards in the last couple days, all at 100 yards. The average of them is in the high 220s and mostly shot on windy days. Most of the 5 shot groups are scoring 43-46. Very good for .22 pellets, but realistically, not high enough to be competitive in the new world of the .30 for these 100 yard product showcase matches like EBR and RMAC and PA Cup.

3DArmsShop · Feb 1, 2025

I'm Closing the survey today! I Got a ton of useful feedback and I want to thank everyone that participated!
I'll edit this post with the results later on today so everyone can see what the community thinks of things!
Once again, I really appreciate it!

walrus6015 · Jan 19, 2025

MDriskill said:
Here's a better copy of the trigger assembly instructions - my link above is pretty fuzzy. As a first step, I'd take the trigger guard off and make sure the sear and its spring are correctly positioned. You likely won't need to take the whole mechanism apart.

Please see your messages, too.

View attachment 529790

Thank you for the diagrams. I will look into this when I get the chance. I will need to find a source to acquire a pin punch, .089 " I believe.

AirNGasman · Mar 26, 2025

Having bought, sold and traded something over a half-dozen Careers, I have what I believe might be a factory original moderator adapter for a threaded Career barrel-

I believe the I.D. of the small end is threaded for threaded Career muzzles, but the threaded O.D. of the large end is larger diameter (.805") than any mod I've seen. Perhaps Shin Sung offered a moderator at some point? The O.A. length of 1.605" would put whatever mod might fit well clear of the fill fitting.

Perhaps someone out there (here) can fill in the blanks with Career historical facts.

.

SpreadLead · Jan 19, 2025

It's hasn't grown back long enough to get caught. Atleast since the last time I made my wife angry by shaving it all off for the first time in 3 years.

I tore her apart yesterday to familiarize and inspect the regulator for a creep issue. New seal kits should be here Tuesday.

Panzerfaust · Jan 20, 2025

SpindleB said:
At 50 yards...

The ozark with the wood is a sweet looking rifle I almost decided on one of those. The extra tank and that 750 cc of air storage beats out the good looks on the ozark right now. I have high hopes for these airguns, there are 2 or 3 I might would like to get.

NCAirLine · Jan 28, 2025

BGarney said:
There is a new aftermarket high capacity magazine source on the scene.. Big Air Precision.
https://www.bigairprecision.com/
Troy is a great guy to deal with and makes quality stuff right here in the US. I worked with him on designing and producing High Cap mags for the Xisico Sentry.
If he don't already have what you need he is up for the challenge of designing and making it.
I have 7 of his mags for the Avenger .25

View attachment 531824

+1 on Big Air Precision. Troy is extremely responsive. Free shipping and no tax on great products. I picked up three mags and a moderator for my Notos.

quickdra64 · Jan 15, 2025

Rob_in_NC said:
Unless I'm horribly mistaken, my Falcon Prairie utilized the same magazine as the Hawk and Raptor actions FN8 Pistol and the action was very, very similar.
Can still readily find the Prairie manuals here

Air Gun Manuals Online

Feel free to print any of these manuals for your personal use. Need to order gun parts? Check the schematics to identify the right part

www.pyramydair.com

Thanks for the link I downloaded all of it just in case.

airgunutty · Jan 19, 2025

RabbitofCaerbannog said:
The gun functions fine as is. Regulator isn't required. I've become spoiled by my other guns and now I "NEED" REGULATOR because God forbid if the spread isn't under 10fps... I've chronod 2 entire shot strings with the long unregulated. With enough HS tension to send 13gr slugs 965fps I got about 28-32 shots between 970 and 940 which is pretty good.. the poi really starts to shift after this. Due to constant large velocity drops for each successive shot.

With the gun set for 8/8.44gr pellets at 930fps MAx which is a whole lot LESS power I got 54shots before the velocity fell off of a cliff.

With the Huma reg set to 125 I'm shooting 10.34jsbs and 10.03 ko slugs at 916 and 924, getting 35 shots all within 3.5 over/under the average velocity they're set for. Then of course it falls off of a cliff. But the accuracy which was already good, became incredibly boring accurate.

And yes, under the safety you can use a 100mm/4" long mm if you remove it from the stock. Otherwise a long t handle is your best bet. I ordered one for 6.95 from Amazon easier done in stock.

I think that the biggest problem is my lack of patience. I need to focus on one process at a time. First get a pump and see what makes itself the next hurdle to take on.

Again thank you for spending some of your time trying to help make my problems more manageable.

Michael · Feb 4, 2025

csdilligaf said:
Shoot any groups yet?

I did shoot 2 groups at 80 yards off a standing tripod.

Pretty good for not trying too hard with the Panthera. Super tight lead in at the the breech on the HM1000x. Wish my Airguns could push them faster.

airgunutty · Jan 16, 2025

cavedweller said:
welcome.. OK has some great field target clubs

Thanks I'll look into some of those

airgunutty · Jan 15, 2025

Hmmm ok thanks. I guess I have a seal kit to search and purchase.

rcarlisle · Jan 15, 2025

I shot some 10gr .177 slugs from my 1701P for poops and grins. Actually, I have to say they grouped surprisingly well for moving so foolishly slow. Not something I'd do on the regular though.

.20calguy · Jan 15, 2025

danimal4789 said:
Hi, I am new to site and glad to be here.I would like to know if the SHERIDAN BLUE STREAK and SILVER STREAK parts are interchangable ? I dont know what the difference is between them.

Welcome aboard!
Show us some pics!
Here are my Sheridan's
The second one from the bottom is my original that I bought new 53 years ago. The others are recent acquisitions.
so.

powermonger · Jan 17, 2025

Hurt my back bring in a new Snowblower so had a hard time shooting today. but got the remote out at about 47 + yards and works great!! these new electric start snowblowers are fricking heavy. should of got help instead of being pig headed. suppose to be on my to a pool tournament.

Poopshoot55 · Jan 21, 2025

Makes sense, thank you sir

Pinterovski · Jan 15, 2025

This was a little dream to make it happen...
My complete Huben GK1 V3 .22

Its still looks like mini hunting rifle with a little modern twist, and she packs a punch

List of mods:
FAB Core CP stock with cheek rest
JMac customs skeletonized buffer tube with folding adapter
Hd24 defense rear piccatiny
Hd24 defense picatinny tank clamp
Hd24 defense black safety lever
Upper piccatiny rail
Donny FL Yokozuna Supressor
Donny FL moderator adapter with quick release
BALDR Pro Dark Bronze Led light with laser
Vector MAGNIFIER PARAGON 3X18 MICRO
Vector Red Dot Scrapper 1×25 MICRO

Ezana4CE · Jan 15, 2025

@Airgunner79 Good luck late-season with your crossbow. Wrong forum for that though.

woogie_man · Feb 8, 2025

Theoben rapid mkii
Dawson Rapid
EdGun Leshiy Classic

I really enjoy my older guns. They just work and are built like tanks!

Threads

Threads

Filter