Threads

Silver Ace · Jan 27, 2025

Mike,

I enjoyed reading about “the 10m stuff”. Different types of guns with various performance levels are what keeps things interesting around here. If we all agreed on what the best gun is, it would get pretty boring here.

Thanks for all your contributions!

WorriedMan · Jan 22, 2025

Back (address page) of Pyramyd Air catalog usually has one. WM

Trucker3573 · Jan 23, 2025

manabeknives said:
From just the looks of it, i do not think the shorter barrel will work in an Epoch.
Skout chopped about 5 1/2 inches off the upper assembly, taking out all the m-lock.
The compact's barrel is showing about 2-3 inches in front of the barrel lock, so too short for the Epoch.
Could probably use longer barrels in the compact, but not vice versa
And it looks like they moved the electronics around for a better user friendly placement, so the lower assembly is different as well.
just an observation,,i could be wrong

Ok. Yeah you are probably correct. Thanks man

scubajeeper · Jan 22, 2025

flaxk9 · Feb 24, 2025

RM.510bigbore said:
I called Airforce for some parts for my .510 this week...While on the phone i tried to find out if you could upgrade existing .510 TX2 valve to the new 300 bar bottle and valve....Does not look good...All Airforce would tell me is there is more than the bottle and valve... With the African Air Ordinace kit for 4500 psi they used a heavier hammer heavy spring and had to replace t

RM.510bigbore said:

The old .510 TX2 valve is 3625 psi with carbon fiber bottle ...This new version is 4500 psi working valve with 300 bar carbon fiber bottle..The African Air Ordinance .510 4500 psi super valve has been around for years...This is a factory supported 4500 psi super valve from Airforce as far as i can tell.. Id say only super sonic with light slugs...Most .510 hunting slugs from 1 once to 1.5 once so it will sub sonic.. The old TX2 valve will shoot 650 grain slugs at 750 fps this valve at 4500 psi should be over 900 fps with 650 grain slug..Im happy Airforce has this factory offering... All I know is this setup with 650 grain spire point boat tail slugs .5 B.C has 1000 foot pounds at 300 yards...Better sub sonic ballistics than most things offered... Hopefully will be able to buy the new 4500 psi super valve and tank to update TX2 valves....

Click to expand...

he carrier tube... My carrier tube is currently stripped out on my .510 TX2 valve from factory 3625 psi use...So yes the aluminum carrier tube needs upgraded... So i dont think Airforce wants use to upgrade our Texans ourselfs...Sadly

Have to use one of those for my .375ct conversion!

Steve0 · Apr 18, 2025

Hatsan Jet 1 2 Magazine HIGH CAPACITY *2 PCS* QD Fox Can someone send QD FOX for me please?
i need 2-mags in red for my JET 2 .25 CAL i do not use E-BAY.

Pneumattic · Jan 24, 2025

The Model# should be stamped on the left side of the barrel near the chamber.

Grady1969 · Jun 4, 2025

sat20387 said:
great, thank you for the feedback. now does anyone have the .25 Barra 250 Z ? If you do what suppressor do you use or what one would You use to be real quiet because I shoot in my indoor range in my cellar.

I’m running a Buck Rail moderator and it really dampened the noise.
These have a good crack when shot without it.
My neighbor thought I got a new .22 cal. LOL
He never knew about PCP’s , can’t wait to see what he gets.

pesty3782 · May 30, 2025

Others - BRK Sonoran 30

Look what made a showing at the Oregon match. BRK Sonoran 30 cal with the Sub MOA barrel. I had it maybe 4 weeks before heading to the match in Oregon. More to come after we get home. Tony P.

community.hardairmagazine.com

Here's an ongoing write up on the Sonoran.

Tony P.

Viciam · Mar 5, 2025

i expect will be perfect for affordable entry to benchrest. we do not need to spend $$$ to get a good shooting gun.

JamesD. · Jan 25, 2025

I used to love this for learning drop, the relevance of bc in same weight, various shapes of Diablo and imperfections. The direct affects of wind on the pellets and receiving Instant visual POI reports from otherwise hard to see .177-.25 Diablos. Iron sights were fun and it’s very easy to see them transverse the gap.
Enjoy it while it lasts. Let us know how your equipment faired and what you learned through this

Ezana4CE · Jan 22, 2025

@tegridy Don’t be afraid to “@“ or PM a member who has experience and posted in older threads to ask a question about a specific detail. Some may not respond and others may not recall, but sometimes they’ll come through for you.

Motorhead · May 27, 2025

Nicest Quality compact I've found is a USO TS-3-12 Glass is really sharp & clear & if wanting crisp parrilax based ranging it does that shockingly well.

coastal drifter · Jan 25, 2025

2 words, shot placement

bootis28 · Jun 28, 2025

Has to be cut off. I melted one off with a soldering iron

Vana2 · Jan 22, 2025

manabeknives said:
What if you hit the stand?
I get why they are cheap...you'll probably shoot it

The indicator is quite sensitive to an impact transmitted through a support attached to the target so it could be positioned a safe distance from the target where it's not like to be hit.

I got the indicators just before the winter set in so I haven't had much time to test what works and what doesn't.

DeanB · Jan 24, 2025

They cant resist dry cat food, last year when snow was on ground I sprinkled some on ground near some bushes along woods and in 2 days I killed 40, its like crack to them. It works even better when other birds are coming to it they cant stand it then.

Tricky-Dicky · Jan 23, 2025

It's interesting that they say the reg is self venting, as a lot of reg designs vent to atmosphere but don't leak, I had read that it was the O rings that were not of the best type to stand long term pressurisation but don't really see that, not bothering to vent mine as I am refilling air bottles enough anyway.

Squirrelbanditjr · Mar 26, 2025

ChrisT said:
somewhat normal for Wisconsin, There have been times when it became a 6 hour white knuckle to get home less than 15 miles although that is fairly rare.

And if the next day is sunny and “relatively” mild the squirrels are usually back out scavenging.

F6Hawk · May 25, 2025

Looks like a nice bag, but I don't need all the pockets. Went this this one on Amazon. Free shipping.

https://www.amazon.com/dp/B07RT9XKNT

sebasguns · Jan 31, 2025

I need to move to Arizona.

coastal drifter · Mar 26, 2025

Larryt043 said:
I got the M4 in .22, copper and 500mm (compact) I too wanted something to shoot around the house and you can find .22 pellets at Walmart and other places while higher calibers are a bit tougher. I also wanted it n compact so it was easier to haul around and you can easily upgrade to a longer barrel and even a higher caliber if you decide you want to. I found that my moderator was causing a POI shift so off it came and now I am shooting quite consistent. I am also getting about 4 mags per fill with the .22 which is almost 120 rounds.

I'm using the donny fatboy that comes with changeable caliber parts (.177-.30) on my .22 Wildcat compact. I started with the .22 insert but changed it to the .25 insert because of poi shifts. All is well now.

coastal drifter · Jan 22, 2025

Scotay42 said:
The crow magnums have a bad rep, but they fly great from this M3, they were terrible in my laat delat wolf, have not tried them in my current one, but .5 in groups at 50yds in my m3, the trophy himters and jsb are a bit tighter, but not much. I have been sniping rats at night from aboit 60yds through a horse panel fence,2x4" holes. It has been doimg surprisingly well with the crows, i have a few tins left to burn up before i go back to the trophys or jsb. The slugs i feed my delta wolf.

never know till you try them, I shoot 27gr H&N hollow point slugs out of my M3 .22 and they shoot extremely well. I was thinking you're probably smoking some critters with those H&NS lol

Floridaman2005 · Jan 27, 2025

muradtexas said:
Again, not what "beating a dead horse" means.
And I did contribute, I gave you my opinion to your inquiry...remember, you even tried mocking it by using "ironic" incorrectly?
He didn't say prisms were perfect, and he didn't say there was no room for lvpos, and nobody is expecting you to apologize for disagreeing with him. I don't know if you genuinely don't understand what you did wrong, but having an opinion or disagreeing with one isn't it.

Let me spell it out for you - it's your dismissive attitude towards a person who is trying to help you. You ask for help, for opinions. Someone offers you their opinion, opinion you asked for, mind you. Your response to a subject you inquired about (keep in mind, you didn't start this thread as a debate, you asked for opinions) is "Yeah, I disagree, but whatever floats your boat". He then asks why you even ask for an opinion if your mind is made up, to which your response is "opinions and information was presented over the last 16 hours that brought me to my decision". You are telling a person who did nothing but try to help you that since you have made up your mind based on information you gathered in 16 hrs, his opinion was no longer relevant to you. Are you starting to understand what my problem is? He told you what he thinks and why he thinks it, with valid reasoning I might add. Even if you understood what he said and disagreed with it, he deserves more than "yeah, whatever" from you. You went from "Any and all input welcomed" to "I know enough to not care about your opinion" in 16 hrs.

Let it go man. Stop being confrontational. No matter how many times you tell me I don’t understand what words mean, it doesn’t make it true. Stop harassing me. Really. Time to let it go. You’ve made your point, and I disagree with it, but whatever floats your boat.

Going to tell me I’m not using that phrase correctly now? I’m gonna do you the favor of blocking you because not seeing anything you say is more valueable than anything you can say. Peace out. Enjoy your day.

WOW · Jan 21, 2025

Sorry can't figure out how to delete a thread. I doubled one, oops

Threads

Threads

Filter