Threads

Airgun Al · Jun 14, 2025

hunterroark said:
FX, I know you read this forum, I have been with you from the beginning sir, where is the semi-auto?
I have owned 23 of your airguns and currently have 2- M3 compacts .177 and .22, 1-M4 .30 Copper Compact with a 480 cc bottle, 1-.30 Maverick compact with a 480cc bottle and my favorite a .22 Wildcat MK111 compact. All took a going through upon purchase to dial them in. I will not buy anymore of your airguns until a semi-auto compact is available. Trust me, it will be a number one seller! Keep it under 7 lbs with a 300 cc compact bottle and under 32" with a sling quick connect. (Geared towards the Hunter)
When your deep in the woods hunting through the thick a big heavy gun is just a drag. It's greats for all the guys that make videos and hunt off tripods. Just my two cents.

Airgunner to the end.

Hunter

Research the discontinued FX Monsoon and Revolution, (but neither were compacts).
At one time, I was a proud owner of a brand new Monsoon in .22 and I enjoyed it very much.
Right after the Monsoon, they introduced the Revolution, which was also semi-auto, a little more complex, and slightly more powerful.
However semi-autos were not every ones cup of tea, and I dont believe that sales were all that great. ??
Then, a few months later the FX Royal was introduced, and it was such a great seller, that both of the semi-autos were discontinued, and FX never looked back.

Airgun Nation · Feb 27, 2025

See official thread https://www.airgunnation.com/threads/introducing-the-new-fx-leopard.1328299/

Arzrover · Feb 27, 2025

Daystate - THE DAYSTATE PROGRAMMER-LET'S TALK ABOUT (PROPERLY) PROGRAMMING THE REDWOLF

Dear all, after discussions with members on AGN and comments by some recently, I am going to start a thread discussing the programming of the DAYSTATE REDWOLF using the handheld programmer. This will be a fun Q&A hopefully, please post questions on the thread for all to see, not via PM as it...

www.airgunnation.com

You will find EVERYTHING you need in this thread..
Bob

Airgun Nation · Feb 27, 2025

Official thread https://www.airgunnation.com/threads/introducing-the-new-fx-leopard.13282

Airgun Nation · Feb 27, 2025

Official thread https://www.airgunnation.com/threads/introducing-the-new-fx-leopard.1328299/

OldDude · Feb 27, 2025

Is it me or it is
1- fairly difficult to connect the usb c cable to charge the battery
2- impossible to plug/unplug the dust cap
without removing the stock?

I think Daystate did not really think this through before coming up with the design. Their solution (a USB-C port deep down there under the stock) is not only very hard to get to, but it is also very exposed to environmental factors like water and dust (common now! is that dust cap really supposed to protect against water? Even if it does (and it is a big if), it must first stay in place. So far, I’ve already lost about a dozen (mostly the ones on the delta wolf).

For ease of use, I’ve been using a magnetic USB-C adapter like this

Amazon.com

Is there a better solution that would seal the port against water/dust and be easy to use at the same time?

Laeljon · Mar 4, 2025

I was doing 6 on PW, but using Phil's Parts now, and just run velocity 925-930, Reg 120 psi NSA 26.8

blackdiesel · Feb 27, 2025

SundanceKid said:
Try these guys. They're in San Antonio Texas.

LCS 3D printed Cheek and Picatinny rail

The biggest airgun store in Texas, located in San Antonio, where we specialize in pcp hunting airguns from small calibers up to 50 caliber big bore. We also car

shop.alamoairguns.com

Thanks

SkeeterHawk · Feb 27, 2025

jarmstrong said:
while sticky threads do sit at the top and gather first light,,, I don't get much from them,,,

I hear you. As you said, they are good for newbies, but I never really look at them myself. As a normal thread, the ones that keep rising to the top as obviously "hot". I was wondering if it was just me.

Richely said:
I have zero interest in yet another post about blowing something up.

Interesting. I didn't know such a person could exist. So, I am hijacking my own thread, but what DOES peek your interest? Shooting tips, hunting, ??

Screwwork · Mar 3, 2025

Nice shooting and close to home, beats doing lawn work any day.

John "spysir" Blount · Mar 8, 2025

Pardon me, I'm sure it is something having to do with airguns but "Nu Aira" ?
Thank you,
John

Toxylon · Mar 16, 2025

So far, 100% of my Weihrauch .22 cals have been inaccurate, ranging from so-so to unusable. It's too bad, since I like the .22 caliber by far the best, as per loading, shot cycle, muzzle report & terminal ballistics, just as much as I find the .177 cal lacking in each. I've had zero trouble with .22 cal barrels in Dianas and Walthers, for comparison.

I like my solo .20 cal springer, but I can only get one type of .20 cal pellet without ordering them abroad, with all the cost and difficulty that entails, incl. customs officers opening the tins due to lack of X ray penetration, rolling their fingers inside for contraband, and then barely closing the lids. If the hypothetical .20 cal Weihrauch didn't like Exacts (many don't), it'd be a real pain.

ZekeZX10 · Feb 27, 2025

Outstanding!

Luv2hunt · Feb 26, 2025

If you have a Sheridan Silver Streak that has a date of manufacture of 1977, 1978, 1979, or 1980 can you please post photos of your guns.
I am looking for a full length shot of the guns left side, a 3/4 shot of the guns left side, to include the rocker safety and rear sight, and a close up of the serial number.

Thank you.

thammer · Mar 1, 2025

Spike_9 said:
Gotcha. Reminds me, I need a larger gun smithing lathe!

Looking good. I look forward to seeing the results of your project.

It was the biggest I could find without rewiring my garage for a true 3 phase panel. Still a 3 phase lathe but with a built in converter.

Joekrooz · Feb 26, 2025

That is one fine gun you got there! The rabbit hole is indeed deep!

rxtargetssys · Feb 26, 2025

http://www.rxtargetsystems.com Thursday and Friday Feb 27-28th save 28% on Rx Target Systems Speed Silhouette sets while supply lasts No code is needed. Regular pricing starts at 1,100 so will be reduced to $792.00 plus tax where applicable.

TnCnDn · Mar 3, 2025

airgunner53 said:
From my experience, the hammer pin may be loose/warn. The hammer pin is rather soft and when cycling the hammer with a heavy hammer spring (and the disco spring is heavy) the pin will slightly deform causing problems with cocking the bolt back. I would say switch just the pin out and see if that helps. If it does, buy a hardened hammer pin or a lighter spring. Hope this helps.

Will do

RabbitofCaerbannog · Feb 27, 2025

SilentSquirrel said:
If you know the dimensions of the spring, you can use a spring calculator to compute the strength.
Here is a link to one of many found online

Hope this helps
Edward

Spring Creator

Spring Creator a FREE Design Tool. Get thousands of designs to choose from, 3D views, CAD files, Spec Sheets, Blueprints Over 70 Trillion Spring Configurations

springcreator.com

Thank you

rokonman · Mar 3, 2025

My FX Dreampup is my go to. It’s a quiet, 50ftlb tack driver that is very light and comfortable to carry or shoulder.

boscoebrea · Mar 6, 2025

I raised the adjustable cheek piece on my Marauder, and it is a lot better. I had extra tall rings on it, which also created the problem. The thicker reticle is nice.

intenseaty22 · Feb 26, 2025

If you are looking for Leshiy 1 350mm barrels, Airgun Heaven has them. They don’t have .35 or .177, but they have the ol’ Dirty .30 Cal !

Long Barrel Edgun Leshiy 350mm | Airgunheaven.com

.177 .35 SOLD OUT. Greatest leap forwards for Leshiy owers! Swap calibres in seconds.... Adjust power if needed by turning the power adjuster, and fine tune your reg... Or buy the Humareg for easier adjustment. .177, .20, .22, .25, .30 and .357..... Length 350mm (std length is 250mm) For all...

airgunheaven.com

NAProf · Feb 27, 2025

Hi Guys,
Did some checking on the schematics. The DRS uses the same barrel tubes, STX liners, o-rings (or CF Sleeve) and liner lock nut as the Panthera/Dynamic/King/ Impact. You would need a new liner, CF sleeve, and Liner lock nut for your specific caliber and length. The only barrel parts that are DRS specific are the barrel inlet (caliber specific) and the Shroud (called Tube xxx mm DRS) which are length specific.

Bagnal and Kirkwood have the barrel inlets and Europe Airguns has the tubes. So, FX isn't providing a kit, but you can certainly build one.

Cheers,
Greg

Ostentatious · Mar 23, 2025

Boss429 said:
i bought the same one not long ago it works good for what it is i will say the legs have positive locks and you can adjust the spring tension
on the legs for a firmer lock, it's nice to pest with as its very lite vs my accu tac brick but build quality accu tac but 400 bipod vs 20 isn't a fair comparison.

Agreed, but if you squint real hard they are brothers

MOE.LB · Feb 26, 2025

JimD said:
Looks nice, what is it?

Aselkon Emperador LS4

Threads

Threads

Filter