Hello all, I am new to the hobby & anticipating the purchase of an AEA HP SS MAX .357cal. Before I purchase the gun I want to get everything I need in hand to use it. I am asking for some budget friendly options. I know I need something to fill with, should I start with hand pump or get a cheap compressor? I would also like to practice with it in backyard so am thinking I need a suppressor. Any suggestions to help me start off on the right foot are greatly appreciated.

I am reviewing all the videos to install a regulator to a Banjamin Akela .22 HUMA, but the videos are not very clear, does anyone have a video that shows how to do the job step by step???

I shoot break barrels but I want to have accuracy benefits of a fixed barrel. (Trust me, I'm a scientist and a statistician and I've studied that topic for many years under controlled conditions. Not trying to start an accuracy debate.) If you disagree, let's agree to disagree so I can get to the real point. I want superior aftermarket barrel options that simply aren't available for breakers but I want the freedom from air pumps or ill just use a powder burner.

Here's the underlever rifles I've been able to find all max out around 880 or lower fps for .22. While these speeds are maybe optimal, in terms of accuracy, it seriously limits the range and knock down power needed for humane hunting. The ground hogs see me 100yds out. I need more than 30-50yds or I can't hit them, regardless of accuracy. I want 50+yds accuracy of a fixed barrel with the power of my break barrels like my Walther Talon Magnum. If fps is too high for accuracy, I'll manage that with heavier pellets. I don't want to manage it with reduced firepower from the underlever.

If the break barrel can achieve hundreds of fps higher using the barrel as a lever, why can't an underlever do it using a dedicated cocking lever?

I bought a tuxing 6.8 liter bottle from amazon for $297 https://www.amazon.com/dp/B09CPRRLGY?psc=1&ref=ppx_yo2ov_dt_b_product_details it says manufacture date 9/22 so in 9/25 should I hydro or wait 5 whole years it says retest period 3 years but I see some people dont worry about hydro for 5 years on these bottles, Im not trying to go out like a taliban in my room an have my arm shoot thru the neghbors window. .

I have had my first PCP for just over a year. It's a Benjamin Akela .22. I LOVE IT! I've put at least 1500+ rounds thru.
It has been very accurate so far. However, I cleaned the barrel and it was still doing amazing, until I noticed it was starting to shoot to the left. I removed the shroud and cleaned the barrel again. Then I dumped out the baffles to give them a look..... YUCK! A lot of black powdery stuff came out and the baffels are coated with a fine powder.
Is this normal? How do I clean them? What are they made of?
Thank you in advance! ;-)

Ok total noob question, bear with me. If i fill the tank on my pcp at sea level, and drive to higher elevation, say 6000+ feet elevation. Could that be disastrous for my rifle or me??

Hi I've got a fx impact mk2 UK legal 177 I've changed the cocking block to a sabre tactical cocking block so had to remove pellet probe and rod and attach them in New block , problem what's happened is power has dropped to 6ft lb just wondered if anyone new why this might of happened any advice would be grateful.
Baz

Love shooting my Sheridan 2260MB. It's my favorite backyard gun. Any advice on getting a bit more power out of it for small pest control? Or is it asking too much from the gun. Not wanting to need more than one well-placed shot to take down small pests tearing up mama's garden. Nosy and picky neighbors, so I don't think a break barrel would be quiet enough. I have a suppressor on it and it's nice and quiet. Just looking for a bit more power. Any advice would be appreciated.

Found these on ebay and thought to share. Seems like Hatsan owners would be happy

I bought my FWB-300S in person at Champions Choice in the early 1980s. My university's team was using the RWS 75, which I did not like as much as this sweet shooting rifle. It mostly sat in my safe all these years. So, two years ago I sent it off to Airgunwerks to be rebuilt. It should go to someone who is going to shoot it. Just trying to see what a fair price should be on this old champion.

I'm riding this to any air gun manufacturer the Seneca Aspen air gun has a built-in pump I thought it would be me if you could make a built-in pump but like a pump shotgun so when you air it up you're caulking it back just like a pump action shotgun that way the gun would look great and also be more like a real firearm and I believe if you would make it in a 35 Cal 45 Cal and 50 caliber or at least a 45 and 50 caliber it would fly off the shelves because it would have a built-in pump and it would be like pumping a pump action shotgun someone please produce this because the Seneca Aspen air gun is cool but it has no power and it doesn't look that good with that handle the way they have it.

A question directed to Dyastate
Why not you make a breech bolt like the one in the Alpha and Delta wolf ?
for the rest of your rifles
let the owners buy the new to modify his guns

any Suggestions? I'm wanting to start with a good accurate pcp.

I just ordered a FX MKIII in .30. Is there anything yall would recommend I do when I get it? Any pellet suggestions? Tuning? Ect ect....

Hello,
Can anyone tell me if a barrel tensioner kit is worth the money for increasing accuracy? I have a fx maverick 25 cal with 700mm barrel. Not shooting slugs yet just pellets.
Also....where can I purchase one???
TIA
Perry

My kalibrgun colibri’s bleed valve has a slow leak and I can’t figure how to seal it. I’ve tried permatex, pipe dope, teflon tape and etc. Has anyone dealt w a similar issue and if so, what can you recommend?

Can you use armor all on a PCP air rifle??? Armor all should be good for silicone and rubber??? Seems like it would work well to lubricate and clean. Does anyone do this or is this just stupid???

I have an avenger in .22, that I've been using with a Hawke 3-9x40 IR that I got used off of eBay. The problem is that it doesn't have AO and the reticle is for a .22 rimfire subsonic (didn't know either of this when buying) which both don't suit me well on an airgun.

So I'm planning to get a new scope with AO and at LEAST 10x magnification. Also the reticle should be fairly thin and should be hashmarks and not dots. Either moa or mil reticle is fine but moa would be preferred.

Any suggestions would be appreciated.
Thanks

Good evening, hope this hasn't been covered before.

So my question: I'm aware the Cayden is made by Kral. But is the Kral Puncher the same rifle as the Benjamin Cayden - same parts etc? Parts availability?
Which one would "you" buy, and why..

I'm not able to physically handle before purchasing and am trying to gain all possible information before buying.

Thanks in advance for your thoughts.

Hey all! New member from Canada here.
So I have an old model 1322, think it's a mark 1 or 2(has "crosman arms" on piston tube)
Having trouble finding parts, have even talked to a crosman Representative on phone, to no avail...
I'm hoping someone here knows something about it. Such as, do they exist/are the newer model's seal kits interchangeable?
Thanks in advance!
Cheers from Canada, happy plinking!

I have a Crosman Nitro Venom .177 that I love, but unfortunately, I can't get it to launch a pellet. Is it possible for the gas charge to leak off on these guns? When I put a pellet into the chamber and try to fire it, there's not enough pressure to push the pellet out of the barrel. It's a relatively new gun with less than 200 rounds put through it. Any advice would be greatly appreciated. Also, there is no repair shop within 200 miles of where I live.

Does anyone know the type of O ring and size O ring for the Diablo Dry Air System. If so where I can purchase the O rings. Thanks. Be Safe.

Wanted to put out a video for people who were unsure about the Tensioned System we have been selling. We are working on getting the tech videos back up and running so we can help more people out.

I am the individual many of you guys have been talking to when you call into the shop. So if anyone has any questions feel free to call and we can chat.


Now this is my first time on video, so don't be too harsh on me as I know I have a face for radio so be gentle. lol.


If there are any questions or comments please let us know. And let us know some suggestions for other videos!

Can you convert a QB78 into HPA/A Bottle Gun?

So this happened after about 350 shots not sure if its the erector lense that got knocked loose from the recoil of my 1000+ fps break barrel or just a lemon of a scope. I know these scopes are cheap but to only last 350 shots? Anyways i heard heavier pellets slow the piston down a bit so the forward recoil isnt as hard on scopes.