Hi I've got a fx impact mk2 UK legal 177 I've changed the cocking block to a sabre tactical cocking block so had to remove pellet probe and rod and attach them in New block , problem what's happened is power has dropped to 6ft lb just wondered if anyone new why this might of happened any advice would be grateful.
Baz

Love shooting my Sheridan 2260MB. It's my favorite backyard gun. Any advice on getting a bit more power out of it for small pest control? Or is it asking too much from the gun. Not wanting to need more than one well-placed shot to take down small pests tearing up mama's garden. Nosy and picky neighbors, so I don't think a break barrel would be quiet enough. I have a suppressor on it and it's nice and quiet. Just looking for a bit more power. Any advice would be appreciated.

Found these on ebay and thought to share. Seems like Hatsan owners would be happy

I bought my FWB-300S in person at Champions Choice in the early 1980s. My university's team was using the RWS 75, which I did not like as much as this sweet shooting rifle. It mostly sat in my safe all these years. So, two years ago I sent it off to Airgunwerks to be rebuilt. It should go to someone who is going to shoot it. Just trying to see what a fair price should be on this old champion.

I'm riding this to any air gun manufacturer the Seneca Aspen air gun has a built-in pump I thought it would be me if you could make a built-in pump but like a pump shotgun so when you air it up you're caulking it back just like a pump action shotgun that way the gun would look great and also be more like a real firearm and I believe if you would make it in a 35 Cal 45 Cal and 50 caliber or at least a 45 and 50 caliber it would fly off the shelves because it would have a built-in pump and it would be like pumping a pump action shotgun someone please produce this because the Seneca Aspen air gun is cool but it has no power and it doesn't look that good with that handle the way they have it.

A question directed to Dyastate
Why not you make a breech bolt like the one in the Alpha and Delta wolf ?
for the rest of your rifles
let the owners buy the new to modify his guns

any Suggestions? I'm wanting to start with a good accurate pcp.

I just ordered a FX MKIII in .30. Is there anything yall would recommend I do when I get it? Any pellet suggestions? Tuning? Ect ect....

Hello,
Can anyone tell me if a barrel tensioner kit is worth the money for increasing accuracy? I have a fx maverick 25 cal with 700mm barrel. Not shooting slugs yet just pellets.
Also....where can I purchase one???
TIA
Perry

My kalibrgun colibri’s bleed valve has a slow leak and I can’t figure how to seal it. I’ve tried permatex, pipe dope, teflon tape and etc. Has anyone dealt w a similar issue and if so, what can you recommend?

Can you use armor all on a PCP air rifle??? Armor all should be good for silicone and rubber??? Seems like it would work well to lubricate and clean. Does anyone do this or is this just stupid???

I have an avenger in .22, that I've been using with a Hawke 3-9x40 IR that I got used off of eBay. The problem is that it doesn't have AO and the reticle is for a .22 rimfire subsonic (didn't know either of this when buying) which both don't suit me well on an airgun.

So I'm planning to get a new scope with AO and at LEAST 10x magnification. Also the reticle should be fairly thin and should be hashmarks and not dots. Either moa or mil reticle is fine but moa would be preferred.

Any suggestions would be appreciated.
Thanks

Good evening, hope this hasn't been covered before.

So my question: I'm aware the Cayden is made by Kral. But is the Kral Puncher the same rifle as the Benjamin Cayden - same parts etc? Parts availability?
Which one would "you" buy, and why..

I'm not able to physically handle before purchasing and am trying to gain all possible information before buying.

Thanks in advance for your thoughts.

Hey all! New member from Canada here.
So I have an old model 1322, think it's a mark 1 or 2(has "crosman arms" on piston tube)
Having trouble finding parts, have even talked to a crosman Representative on phone, to no avail...
I'm hoping someone here knows something about it. Such as, do they exist/are the newer model's seal kits interchangeable?
Thanks in advance!
Cheers from Canada, happy plinking!

I have a Crosman Nitro Venom .177 that I love, but unfortunately, I can't get it to launch a pellet. Is it possible for the gas charge to leak off on these guns? When I put a pellet into the chamber and try to fire it, there's not enough pressure to push the pellet out of the barrel. It's a relatively new gun with less than 200 rounds put through it. Any advice would be greatly appreciated. Also, there is no repair shop within 200 miles of where I live.

Does anyone know the type of O ring and size O ring for the Diablo Dry Air System. If so where I can purchase the O rings. Thanks. Be Safe.

Wanted to put out a video for people who were unsure about the Tensioned System we have been selling. We are working on getting the tech videos back up and running so we can help more people out.

I am the individual many of you guys have been talking to when you call into the shop. So if anyone has any questions feel free to call and we can chat.


Now this is my first time on video, so don't be too harsh on me as I know I have a face for radio so be gentle. lol.


If there are any questions or comments please let us know. And let us know some suggestions for other videos!

Can you convert a QB78 into HPA/A Bottle Gun?

So this happened after about 350 shots not sure if its the erector lense that got knocked loose from the recoil of my 1000+ fps break barrel or just a lemon of a scope. I know these scopes are cheap but to only last 350 shots? Anyways i heard heavier pellets slow the piston down a bit so the forward recoil isnt as hard on scopes.

Anybody have information on the Immersive prism scopes..pro and or con?

Question for you all, two actually, for awhile now I’ve been intrigued with the idea of converting a existing PCP platform to .27 cal. Just plain curiosity based on the accuracy and flat shooting characteristics of a powder burner in .270. I’ve reached out to several companies to see about acquiring a custom barrel in .270 for my Synrod with no joy in that pursuit. Of course receiver would also need to be machined. So question #1 what is the consensus on a .270? I think it would have merit, probably take a existing platform in .30 or .357, using the power plant and just changing barrel/receiver to .270. That is if no one has already done it but I never recall seeing one. Secondly what rate of twist would optimize the performance in a PCP platform?

IMHO I really think taking the accuracy of a .25 with the added mass of a .270. combining that with the higher velocity and proper rate of twist, which I think would be key to its performance, could be a showstopper of a combination and hopefully be a pretty flat shooter out to 100 yds+. Of course having it regulated would be a must too.

Lastly any ideas on a gunsmith who might be willing to produce a one off barrel/receiver combo?

Can someone walk me through or know of a video on tearing one down?

I don't want to spend $380 to ship it to AOA once again...

Thank you to anyone who is giving me the time here with quality answers. I have had low end pellet and BB rifles for 40 years. My last gun that I purchased was 10 years ago and it was a Gammo 177 Single shot break barrel gun. I don’t mind this gun but I would like some thing possibly a little quieter one that Is possibly a little bit more powerful and accurate. I would like to move on to a BCP rifle now. I would like to move up to a 22/25 caliber as well. I have done some research and I am interested in the Umarex origin 25. I do have access to a scuba tank. The things that are important to me are: A dependable accurate gun that has few breakdowns, powerful enough to use for small game, and very quiet because I will be shooting a lot in my backyard as far as practicing and enjoying this with my kids.
Please direct me in the right way, I am looking to have this gun for a long time I am only an occasional user but want something that’s quality when I choose to use it.

Model Gun Corp Tokyo Japan .177 Pellet Gun

I have a Model Gun Corp .177 Pellet gun purchased in Japan about 25 years ago. It is a S&W replica model 459 On the bottom of the magazine is a receptical to rifill gas. I don't where to obtain this gas any help would be greatly appreciated

( the receptical looks like the type you see on the bottom of a Butane Lighter The gun says LIQUID CHARGING

Are any members running this one-piece Burris mount on their airguns? If so which gun and scope pairing are you running? What are your likes and dislikes? I was looking at the quick detach version to place on my Edgun Lelya with a scope with a 44mm objective for the upcoming squirrel season. I’d like some feedback before I seriously consider purchasing this mount. If you have suggestions for comparable or better mounts that have worked for you I’d appreciate suggestions.