Seeking an after market tuner for the HW75. Can anyone recommend someone reputable?

Thanks in advance!

Does anybody anything about these air rifles? They come with 2 barrels 25-22 cal. Kinda look like Kral?

While using my FX chronograph recently I noticed that it is now giving me audibles on shots remaining in my magazine, telling me when the magazine is empty, etc. This is a great feature, but how do I set the shot count for the magazine? Right now it thinks that my 10 round Veteran mags only hold 8 pellets. I can't locate the mag count setting in my setup menu. Thanks in advance for your help.

I’m wondering if anyone is having problems with this camera, like connecting to your devices (phone/tablet etc) or any body knows how to fix those issues, I really appreciate you comment and experiences in this matter. Thank you very much be safe

I'm a novice and would like to know, what is the most accurate and affordable pcp rifle to 50 yards? Any good recommendations? Within USD 500.I want to kill the rats in the chicken coop and need a night vision scope?

I'm contemplating getting a Huben K1 but I'd like to take it to my local firing range, where they would expect it to be "rendered safe" when not in use. Usually for conventional firearms this means safety on, unloaded, and chamber open.

What's the closest I could get with a Huben K1? Based on my understanding of how the gun works, the best I can do is empty the magazine and put the safety on; is there some way to obviously render the gun "safer" than that? Without being able to remove the magazine and without a bolt to hold open, what could I do?

So I see some people mention 2 hours, I seen someone say 50 hours, I have no clue how do you know when to change the oil, Im planning on getting secolube 500 its 23.75 a quart for me buying one gallon thats decent should last a long time.

Hey all,

New airgunner here looking to get a hatson 30 cal break barrel. I was wondering if anyone could point me to any lead free 30 cal pellets. I have looked around all over and even emailed some companies like H&N to ask if they will make 30 cal lead free pellets in the future with no luck. Is this just not a thing? I am interested in taking small game and do not wish to handle lead as I have gotten elevated lead levels from firearms in the past.

Thanks!

I have . 22 sidewinder less then 300 rds thru it. last night filled with air and this morning it's lost half of the yellow on the pressure gauge . Is there a seating period for seals?

what could be better than a pvs 14?

I seen folks use tap water distilled water, water wetter, Whats the deal is tap water fine followed with vinegar after a few months to clean up the mineral deposits, Is distilled water by its self bad, Do you need water weter if you use distilled water or should I just use tap water with ice.

I might need a new water pump for my AV 4500 compressor. I found this place online but they have no phone no. to contact them. I'm hesitant to deal with someone that only deals online. Has anyone dealt with them before?

https://www.aliexpress.us/item/2251...IA&mp=1&gatewayAdapt=glo2usa&_randl_shipto=US Hardcover version

https://www.walmart.com/ip/seort/306365500 Unknown version

https://www.ebay.com/p/18021956253?iid=353126179430 Unknown version

Which one should I buy from all these are very reasonable priced.

Should a neophyte want to establish THE "best practice" routine for caring for their first pcp and its accouter-mental accessories...is there a bible available? Surely one exists, but I'm not finding it.

I have a new Air Venturi Avenger (predictable; I know) and the manual has a couple of stumbling points that I need help clarifying.
1) The manual says that all pcp's like to be stored with some air in them to keep pressure on the seals. The next couple of sentences are about degassing. Is there a problem storing my Avenger with 3000 ish psi in the reservoir?

I'm sure there are many precautions that I absolutely should observe that haven't even occurred to me. There has to be a compilation for blank pages like me. Where can I find it?

My L2 came to me with the bottom shaft curving off to the right. I'd imagine it's an easy fix to straighten this out. Can anyone point me to a video discussing this subject. I looked around but didn't come across the topic. Thanks

I'm considering one of these in .22, curious how they compare with LCS/FX quality.

On all the airguns that I have/had on which reg adjuster can be accessed while rifle is pressurised, reg pressure could be lowered by turning the adjustment screw 1/8 of a turn or less and then shot a couple of shots and do it all again until pressure is lowered to desired level.

Is it the same with Delta/Alpha Wolf or do I have to literally follow the procedure and take the bottle off every time?

Thanks!

Hello, can you explain the rail size to me (and an example of airgun scope compatible with a Slavia 630 model 77) thank you

Hello everyone, I have a Slavia 630 rifle (Model 77), I would like to buy an airgun scope, can you advise me of it at a reasonable price? Thanks in advance!

Hi guys I have a Fx panthera 700 and I was wondering what happens if I shoot pellets? I know is a dedicated slug rifle but were I live is basically imposible to get them, also are really expensive.

Br

Hey everyone, i use a M3 in .25cal first reg at 175bar , second at 155 bar and use 41g slugs at 960-965fps on power setting 16 and for 33.95g king heavy mk2s at about 960fps i use power setting 10. Last night i was doing some chrono testing and i noticed the velocity would jump 10-15 fps higher when the second reg hadnt recovered properly ( it would stick at about 145bar) but after another shot was fired the plenum would refill properly and the second reg would then settle back to where it should be, thus giving me my normal expected velocity for the 33.95g pellets.
Is there anything i can do to remedy this slow reg recovery/sticking ? Would changing the second reg washer stack do anything? Or maybe install a huma reg??

Hi Guys Just ordered a Gamo Arrow.
I’m having issues with it.

Good accuracy open sights, (minute of squired at 20 m ) I’ve since added a decent Nikon scope and Warne rings and having massive issues with accuracy. Scope is fully adjusted windage and elevation and rifle shooting low and left at 20 or so feet.
Tried different ammo same issues.
I feel like the barrel and dovetail mount surface are not parallel.

Its not the scope as i took it off my deer rifle.

Any ideas?

hello: I have enjoyed air pistols for about 70 years. I have a beeman feinwerkbau c-5 five shot pistol with extra co2 cylinders and extra 5 shot clips. very good condition. anyone know the value or who might be willing to pa fair price for same/ what is a fair price?

Any other members?