Just recently bought a .177 panther hunter compact. My question is, does anyone know the thread size for the moderator? It it bigger than my wildcat but I can’t find it online.

What is the best scope size and scope for an EdGun Leishy classic?

I don’t want the whole discussion page just being me asking if water is wet

I’ve had it in storage for a while

Recently purchased a Air Venturi Avenger.25 Cal and have had to use adjustable scope mouts on my element helix scope as I was getting close to end of adjustment in my scope. Someone just mentioned that I should not have had to do that with that rifle. So now I'm googling and getting a bunch of different sources saying different things. Has anyone ever had this issue and is it solvable without putting so much stress on my scope with my setup now with my rear scope rings 1.5mm higher than front.


Uploaded pic for attention/help

Hi, Brand new to PCP’s, I’m looking to shoot a Turkey once a year and hunt quail. Best caliber? .30 seems to big for quail.

Thanks!

i just want to know if anyone has encountered this problem i tried to install a huma regulator on the 2nd reg position of my FX Impact Mk3 and it leaked out of the trigger guard area when i connected the bottle. i did the following double checked the instructions to make sure that the bevel springs were installed correctly ,made sure that the Derlin washer was installed with the black mark against the regulator adjustment screw plug ,inspected the reinspected the regulator for damage found none and reinstalled per the instructions once the regulator was installed i screwed in the regulator adjustment until it just bottomed out.i pulled and held back the cocking lever screwed in the bottle same issue it leaked . I put back the original regulator it worked just fine am i missing something ?

Hey was looking for some opinions. Have an FX Impact M3 in the compact version. In 30/22. Wanted to get more into slugs so would you guys modify the compact for $700 ish or buy a dedicated slugger? Also own a huben in .25 and a prophet 1 in .22/.25. Plus some others in the mid range. Adding more guns seems like a waste of money ant this point. Also are the prophet RPB barrels competitive with FX barrels for slugs?

Hi, seeking help with my R3M,
My gun doesn't shoot as usual after deep cleaning, the issue is at the same hammer tension I got only 500 FPS instead of 880 FPS
I have tested everything (regulator, hummer spring, valve spring, the valve itself), and was working fine
My reg is set at 125 BARs
still can't back to 880, The max I can get is 670 FPS with a lot of hammer tension which eventually going to break the valve

any Idea

BR

So I just took my blitz out right now an it shot a burst of 4 or so an it stopped an I though it jammed up at first but its just not firing now after I decocked the rifle last night, I cocked the bolt all the way back an let it go an press trigger just to hear a click as if I decocked the rifle again, Cant think of whats going wrong , I just pulled the bolt back 70% an hit the trigger to decock it last night now it wont fire.

Does anyone know what happened the SG? I just noticed his youtube channel was missing from my subscription and can't find any of his videos.

Hey there,

Would it be possible for a forums moderator to reach out and contact me?

Thank you much.

Rob

Hi just received my new Gamo coyote, it came charged and after about 50 shots it needed to be filled.
I connected the supplied hand pump but the gauge on the pump goes to 3000 but the gun will not fill.
I‘m I doing something stupid? I can see any reason

This is something that I hadn’t really thought about until recently. Can you shoot the tank pressure below what reg number one is set and do it without damage and maintaining consistency? I know you def couldn’t maintain it going below the operating reg pressure just not sure if number one plays it this ?

Its on ebay has 2 barrels 22 -25. thanks Willy

Recently purchased a GC CS2 compressor, and a 3liter tank. The CS2 can only fill to a hundred bar and stops. Tried a hand pump to see if will fill past a hundred. The hand pump feels like at max fill. Wouldn't the pumps fill past a 100bar, do to empty volume?

I need to replace the hammer spring in my ghost. I assume I pull the three screws out of the back and go from there. Any other tips. Couldn’t find a how to video on line. Thanks!

Can anyone give instructions or links on how to de-gas AEA Terminator .357? Thank you

Hey everyone. So I have the umarex hammer and I love the thing but it’s just soooo loud. What’s my best option to moderate the sound. I’m seeing silencers but they only go to .50 will those work on the hammer even thought it’s technically a .51 cal air rifle ? I found these online. On the Donny fl site it shows all his silencers as discontinued.

Is there a best way/place to sell... MOD EDIT: removed a list of selling items.

Any advice is appreciated.

New Umarex Gauntlet V1 depressurizing in a week.

Is this normal? Filled to 3000psi, and a week later, back to 0 psi

Hey all,

New to the pcp game here. So I noticed last time I was pumping, I would pump up to 3000psi like normal and when I bleed the hose on my pump I would lose around 1kpsi. Now, when I bleed the hose on my pump, all of the air just comes out and it goes down to 0psi.. not sure what is causing this problem. Any help would be greatly appreciated. Thanks!

Does anyone know how to remove the moderator from a Notos ?

Hello, everyone,

Has anyone ordered Immersive Optics 14 X 50 from Sports And outdoors - Enrils? They claim that they have stock on the webpage, and they will ship within two weeks. My order has not been executed for more than two weeks. I have written several emails to check the order execution status and have not received any reply. It seems that this company does not exist. Has anyone encountered this situation? Please share your experience, thanks!

ola a todos, tenho pouca experiência com PCPs e venho pedir ajuda. Comprei um RTI Prophet l .22 de segunda mão com um cano RPB-1, o regulador estava em 170 bar disparando balas HN 23gr .218 a 990 fps mas o gatilho era muito pesado, então ajustei atirando com um cano vazio , de repente notei que perdeu força, colocou uma bala e atirou e a bala não saiu do cano. Desmontei uma arma para procurar o problema que não consegui encontrar. Remontei tudo e quando dei o primeiro tiro a bala saiu, coloquei outra bala e ela atirou com mais energia mas não a 990 fps. Em seguida, tentei várias voltas para frente e para trás no tensor da mola do martelo e ainda não consegui mais de 850 fps. Eu removi o regulador e relubrifiquei sem sucesso, a velocidade permanece em aproximadamente 850 fps, então pensei que o manômetro do regulador poderia não estar lendo corretamente, disparei balas até que a pressão da garrafa igualasse a pressão do regulador e, quando a pressão da garrafa caiu de 170 bar, as balas pediram a viajar mais devagar. Neste momento não sei o que pode estar a correr mal e por isso peço a vossa ajuda. Agradeço qualquer ajuda e desde já agradeço.