OK so ya got a air rifle that's shooting a 22g. 25cal. pellet at 750 fps. safe to say if it was a 22cal. 14.5 g. should clock 800 fps?thanks.

I have a Texan .257 LSS. There is a o-ring directly behind the tanks top hat. I replaced the original with the orange o-ring in the picture.
For the life of me, I can't figure out what is the purpose of this o-ring. At least it's not obvious.

Can someone smarter than me, help me out?

Rod in San Francisco

I've had the Gunnar for a few months now, It was doing some weird things on my last few outings, and I haven't really had time to troubleshoot until now. It seemed like it was shooting erratically, I could tell by the sound of some shots, and could see on the target where the shot would drop quite a bit. It wouldn't do it all of the time, just maybe once every 8-12 shots. I took it out today with a chrony, and verified very inconsistent shots. Here's a pic. My thoughts are possibly a regulator issue? Or is there something else I should check? I also noticed maybe one or two times on my previous outing, that the gun would not fully cock. I made sure that I was pulling the cocking lever all the way back, but it's like the bolt would not "catch" right, and had to be cocked again which of course caused a double feed...Again this only happened once or twice and may or not be related to the erratic shot FPS. Gun is pretty much new, nothing has been changed or modified. I know Benjamin is pretty good w/ warranty issues. I would prefer to fix it myself though if it is a minor issue.

I was wondering is there any Finnish shooters on the board?

Any one know how to remove anti tamper pin on hammer spring rear plug? On hatsan flash 101.thanks.

I was wondering if anyone could tell me why can't I find the kral pcps anymore like in airgun depot or pyramid air ?

Hey Guys and Gals,
My .25 crown is sliding forward an inch in 3 shots rasing h*ll with my shooting.
I have 6 orings degressed on the block side of the shroud nut. I've cleaned the interior of the block where the barrel assembly sides into, and still shoot my barrel towards the muzzle.
Any ideas on how to rectify it?
Thanks.

Texas Field Target - September 23rd 2023 Map and Course Info

Target and course map have been made for September. As a reminder, Members have a private course and range to shoot this Saturday from 9am to 9pm on our 10-125 yd / 20-100 FPE Field Target courses, plus the targets will be lit for night shooting! We will have 3 courses for 2 power classes open and 2 lanes for practice. Practice lanes will also have a chronograph set up for tuning, paper targets and will also be featuring the very first S&S Silhouette Field Targets, yet another addition to the finest field targets made. Dare to compare y’all!

TFT Members can shoot almost any airgun at our targets and practice range. See what your AAFTA Hunter rig or 20 FPE pistol can do out to 75+ yds, you might be suprised. Everything is bigger in Texas, so why not 20 fpe FT, right? The white course is for just that reason! Because we use all S&S targets for <100 fpe FT we can share targets between classes easily, which means members have more options and can shoot a wider range of energy levels in the same day and from the same lanes. Loop as many times as you like with ( almost) whatever airgun you like.

Red Course- <100 FPE, .30 cal max, pellets only
White Course - <20 FPE, pellets only
Blue Course - <20 FPE, pellets only

General rules for non-tournament shooting. ( Tournament rules may be different )

White Course - 10-75 yds Targets #1-3
Red Course 25-125 yds Targets #2-4
Blue Course 10-125 yds Targets #1-4

All distances will be given. Each course will use only 3 of the 4 targets per lane. White course targets in the 10-25 yd range are to be shot only with <20 FPE. Each course is a total of 36 shots, with 2 shots per target, 3 targets per lane and 6 lanes in total. Course of fire is near to far. There are no forced position lanes. Shooters may shoot from any position and may use seats without backrests, unattached bipods and slings. Both the Red and White courses are scored as hit or miss.

Blue Course - 10-125 yds
This is a challenge course following the same rules but with a very different scoring system. Shooters will have 6 shots maximum for each lane. Each target must be knocked down once and only once. Lane is completed after all 4 targets have fallen once OR a total of 8 shots have been taken, whichever is first. Best possible score is 4 on each lane with a best possible overall score of 24. Maximum overall score is 36. Targets are shot near to far. Scorecards are to be marked with hash marks under each target score space indicating shots taken, i.e., if it took Shooter A three shots to knock down a target, there would be three hash marks in the scoring space. OSOK!

Anyone knows if Benjamin Marauder magazines work for WAR rifles? I was told that they should work fine, but before I go and order a bunch of them, I wanted to confirm this. I know that this is a very rare rifle and the company which made them went out of business, unfortunately, but I saw several AGN members still have and happily use them. Please advise folks, your help is very much appreciated!

In order for me to complete my profile, can someone direct me how to complete the last step ?
TIA

i never herd back from him?it was about 8 or 9 days ago? i don't no if he got it fixed or not.I mailed it for free"i caint find his add. eather?

I don't no if these were for Migets or what? i never seen any Migets diving in sea hunt? it says 3000 psi?

I have a problem with my LCS SK19 after following the Airguns of Arizona seal replacement video:-
1. The gun fires once only after it is re-powered .
2. Upon re-powering the mag lever gets stiff and locks the rotation of the magazine ( as it suppose to be).
3. After first shot , the trigger stops working, the mag lever loses power and the magazine can rotate without opening the lever.

I suspect the problem must be some type of alignment with the mag lever , rotation of the magazine and power/air being driven to rotate the magazine .

You can see a short video I did below.

Can anyone assist ?

Thanks in advance

I have a new to me T05 .22 Diana 48. I got it in a trade with a friend that had it sitting around with a broken cocking rod (first side lever I have ever shot).

My question is on your guy's Diana 48 do your have that much of resistance when closing the lever after cocking (@ 7:48)?

I have my rod adjusted and buy turning it out 1/2 a revolution my lever will pop like in the video, but I do see the rod bend/warp.

I think someone had one on here?

I need help i got a orange spritech compressor that i lost the air holes in need of a holes and body got a link so i can order one please help squirrel hunting is around the corner

Hello; recently bought the King Arms 11 inch Buntline. Never had an Airsoft. Load the Green Gas in the grip. Diagram shows loading gas not at 90 degree angle but slightly “ flexing” the green gas can. Reminds me a bit of filling a lighter. Have successfully loaded a couple times- unsuccessfully a few times.
Gas sometimes flows out from side which would seem to indicate full but doesn’t necessarily mean it is.

Any thoughts and/ or help.

Thanks

Any help would be appreciated thank you

请告诉我那里的问题

Thanks Willy,i wonder where they went?

Been poking around, and found this - Bottle, any reason that won't work for an Umarex Gauntlet or Umarex Notos for field refills? Capacity is about 122 CI for the bottle. Any warning flags about the mfg?

NOT DOT approved - so nobody is going to fill it - I've got my own compressor so shouldn't be an issue. Looking for 2-3 bottle refills for either of the rifles - seems like this would work for that - correct?

Hi, new and need of help I'm trying to get a valve spring washer for a Benjamin 347,but they seem as rare as rocking horse sh** does anyone know the dimensions please

Gimana cara nya untuk belanja sperpart senapan angin fx impact mk2

I have filled my bottle to 220 bar and attached it to the gun, I then try a dry fire and there is no air release.
The rifle was taken apart to the main components recently this is removing trigger mechanism, barrel, stock and reassembled.
Can anyone guide me as to what might be the issue and how I can rectify the situation.
Thanks

i knew there had to be more than one! staying up late manning the tripod in the window paid off .. we're clearing the threats lol .. this one was textbook, dropped like a sack of potatoes .. i did the humane thing and made it quicker for him .. dumped the whole mag in him ..