i have a problem with my FX V2 chronograph. When I use it with my underlever rifles I place it on top of the barrel and now it will record 2 to 5 shots and no more. It just started doing this and when I use it with break barrel rifles it works fine. Has anyone else had this problem? JimmyV

I love the app, however, a more current list of airgun projectiles is badly needed. Many of the manufacturers lists are missing calibers, a few manufactures of very popular pellets and slugs are missing, while others are simply missing some of their offerings, some are missing entire caliber lines.. are there any talks of updating the database or other features in the app itself?

Looking to ID an Air rifle
Is about 35 inches long
Break Barrel type
Nice Wood Stock
Has an Eagle logo stamped on top of barrel over the trigger
with USA inside the Eagle
.177 Cal stamped under the Eagle
Thanks
lc

Looking for a set if sights for Weihrauch HW77.

Does anyone know of any stores that carry PCP guns, ammo, compressors around the Milwaukee area?
I've google searched and can't find anything even related.

I saw a post with charts showing how the wind direction moved the point of impact. One for firearms and one for air rifles, if I got it right. I thought I had downloaded them, now I cannot find them. I should have printed them right then. Could anyone direct me to those, Thanks

Hi everyone, can you help me, I need to know the exact measurements of the screw in the photo. Thank you

Is there a quicker method?

Hello everyone. I'm new to airgun nation and looking for help regarding a Webley Tempest. At some point in it's life a long time ago, I accidentally pulled the trigger when the gun was half cocked resulting in the the barrel slamming shut. Since then, the gun will half cock, but the barrel will not close (return to normal). The only way to get it to close is to pull the trigger while holding the barrel and slowly let it go down. Does anyone have any idea of what happened and how I can fix it? Thanks, Merlin -

Recently bought a Falcon FN-8 I'm looking for a manual or any other information that I can find on them. Thanks.

Took it out to the wood after walking around noticed cocking handle went missing
I try reaching out to UAG but they don't have one or know any aftermarket part I can use
Hoping to see if anyone know where I can fine one untill I find something that will work I just put a bolt on it for now

Hi,

What is the shortest and the most effective moderator you have on your Ghost that you love?

Hi all.

I need a very pressing question answering, which I know my fellow airgunners will have an answer too.

The HW80/HW80k. A staple example of a springer!... But... has the performance changed at all over the years? Is it still the same internally as it was 20 years ago, or has it been dampened down at all. The new HW80k luxus looks cracking. But, I'm unsure whether to go for an earlier model as I want the magic that has given this gun somewhat of an external glory. That said, if the inner workings are the same across all generations, I shall go for the new versions as I do prefer the look.

Please help

Ok

Just out of sheer curiosity, I've been toying with the idea. Now stay with me. I will make it as concise as possible.

Assuming there was no legal limits to the power a spring piston rifle could produce AKA the American market, what differences to the internals of the gun are altered to restrict for the UK market. I'm under no illusion that, ofcouse, the main spring will be weaker, but what about the piston stroke? Or the cylinder diameter/air volume or TP? If you disassembled hw95k, one bought in UK and the other bought in USA what differences would you find internally. One produces 17ft lb(usa) and the other sub 12(uk).

Do sub 12 guns even have the capacity from a piston stroke, TP, cylinder volume stand point, to ever achieve that of an identical American verson in principle? It's certainly not the case to just put a larger spring in or wack half an inch of spacers in as the gun just goes coil bound and you are unable to cock the rifle. So there must be other powers at play.

Hello everybody,

First of all, thank you for adding me to this forum. As a new member, I would like to ask you all for some advice.
I bought a Umarex AirSaber a few months ago, and haven't used it since then because I was looking for a convenient air pump. But now that I found one, when I try to pump air in the appropriate compartment, for some reason the air comes out from the tube where we are supposed to insert the arrow.
I would like to know if this is caused by a manufacturing problem or a manipulation error from me ?
Thank you in advance for your help.

Aside from a moderator, what else can I do to make this thing ultra ninjafox mode?

thanks!

Plastic teeth on magazine have broken in multiple places. Is this common or did I just get unlucky defect. If it is common is there an upgrade that fixes this issue. Pistol new was 40 bucks so I understand the cheap quality. Any info is appreciated thanks

I have had a Diana 48 for several years now I have not had much opportunity to work with. Primarily because of moving and the fact it is not configured the way I want IRT sights. I acquired an Anchuetz rear the fits well and al though I can use it I want something with preferably the ability to accept an M14 front or at worst some globe front sight.

What I didn't know is with the RWS 48 rifles there are variations as to how the front sight mounts, I saw the variations are marked on the receivers. On my Diana there is not variation stamp, T06 or something similar.

So, the front sight mount on my rifle has the two cuts that appears to be the same as I found on the T01 RWS. I saw this thread but I don't see a solution... https://www.pyramydair.com/blog/2010/02/mounting-a-globe-front-sight-on-an-rws-485254/

Anyone come up with a fix?

I have been thinking of one of the clamp type bands as a solution https://www.ant-supplies.uk/rail-base-mounts/diopter-sight-muzzle-adapter-bases.html

I own this exact compressor and lost the hose.

With poor timing, too. I’m supposed to shoot tomorrow.


if in-the-know, could someone please tell me how to find a replacement hose? I’m not sure what the query would be, as I don’t even know what the connector names are called.

ideally I’d just grab A replacement for a quick delivery from amazon.

or, better yet, maybe you can tell me where exactly I left my original hose

thank you in advance for your help!

Hi All. I am new here and new to PCPs since I have always shot break barrels. A few weeks back I bought a used .25 cal M-Rod off a buddy who tried to tune it but gave up halfway. My idea is to pick up where he left off and try to get this thing shooting again. I currently have a hand pump he gave me but have a cheap Vevor compressor and chronograph on the way. Should I try to tune this rifle or try to get it back to the factory setting? Are all M-rods set the same at the factory? If so does anyone have the specs so I can reset it or how would you all recommend I go about this since he said he doesn't have that info anymore?

Does anyone have any experience sorting FX brand .25 caliber 25.4 grain pellets. I have just been tuning my Avenge-X for these at 910fps and got pretty good results for a whole string of 100 shots. However, shot to shot deviation looked higher than I wanted. So, this morning I sorted a bunch and was surprised a how much deviation they had. They ranged from 25.00 up to 26.00 with most being 25.1 to 25.6. So, I used a group of 15 of the 25.3 + or - .05 group. This shot string had a spread of 6fps and STD of 1.51! The first 15 shots from a random unsorted batch from the same tin had a spread of 12fps and STD of 3.42. I had hoped sorting would help but I was not expecting this much improvement.

So, my question is this what others see with FX brand pellets. Are the JSB pellets more consistent?

Also, should I be using sorted pellets when trying to come up with a good tune?

Hi!

Any experiences with the ZAN .22 20grain slugs? I couldn't find any info about them.
I'm looking for ligth weigth slugs to shoot them out of my Fx Wildcat mk3 compact (tube version).

Thanks!

I recently put the saber tactical chassis on my Avenge -x . Also, made a caliber change with new barrel and probe kit .
When I began charging rifle with air .
The rifle now leaks !! Pretty noticeable where it's leaking .
When I apply upward pressure to both tube and barrel , the leaking sound of air stops . Seems to be where barrel meets receiver?
Is this common . Could it be the barrel when changed is not properly aligned for set screws on top receiver "pic" rail?? Or is this a cylinder issue?
Also , it was very tight "CHASSIS" when installed.
Thanks for any feedback.
Hopefully someone has seen this and I won't have to go into a deep dive with complete dissassmbly...