and ONLY 4 inch EYE relief , so no free hand arm length hold .

you want a pistol scope , arms length means 16 to 18 inch eye relief some "long eye relief ?scopes only have 4 to 7 or 8 inch Burris...

This listing has been renewed

If still struggling I'll share how it worked for me. Facing keyhole of upright gun there's a metal tab inside opening, left side. Tab...

https://a.co/d/fh3SRyy The Panzer is a fantastic option, and it's what I ran on my 2 GK1 If you want a fixed mag that can go down to...

I’d agree. The hammer material doesn’t appear to be as hard as the sear material. I thought the previous owner may have cranked up HS...

Mine’s right under this, and adding a Huben GK1

No blackwolf but a 👻 try jts or aea most are finding 1 of them to be more to their liking.

PP700SA has a loud bark , just a warning.

I'm not a fan of the digital scope, but the ballistic calculator with the LRF is great. The other night I took out a rabbit at 15 yards...

I have 3, 4x16x44 , no complaints! One on my 17 Hornet

Very good scope for the money! I have one mounted on a 250AI, 6.5PRC and one on my Guantlet SL 22

I've purchased enough cheap gear in the past to always eventually end up with what I really wanted in the first place, so now I save...

I have a CV Life 3x9AO, $39.00 scope. Mounted on a Hatsan 135QE in 25. So far 2500 plus pellets thru the pipe and still going strong...

Mine started with a HW100 kt And then a fold up BRK Pathfinder which I put in a ruck sack and get on my XR 250 Honda and go anywhere bike .

Who makes the transfer port on the right? It looks good.

I got the FFP 4-20x50 illuminated with the moa reticle. exposed turrets.

I present to you... the $5k rat.

I don't have a Tuxing but a YH. So far I learned anything wrong with air pressure I don't troubleshoot anymore. The heat kills the...

If the OP is serious about practice, you have to think about economics. In that light, itis hard to beat a PP700SA. Once charged to 220...

I removed that one and installed 3 larger OD gauges between the compressor cylinder and the tanks. Cross checking works more reliable...

what twist rate liner you have in it? Unscrew the shroud, TR should be printed on the side of the liner.