Today I went out back to use the Tuxing Twin compressor to fill my 6.8l the thermometer on the compressor works all the time so the...

This listing has been renewed

This listing has been renewed

Yeah they come fairly overhammered :) as long as the setscrew is still grabbing the adjuster you’ll be fine but yeah, could be that the...

You also don't need to remove the shroud to clean the barrel, just use a straw and feed your line through.

RAW, Brocock, Airmaks, FX, Huben. I have a RAW Chassis in .22 and it's over a pound lighter than the wood versions. You couldn't go...

If I was you, I would get those suckers out and order new ones along with a spring.

😆 my cheap chinese vendor shipped last one at 3000 psi already.

That heat sure makes a pretty blue.

Baffles jammed up with lead dust? There just plastic, so pounding can cause them to be deformed. No spring is still a mystery to me...

Almost through the first tin of 500 with my new R7. My plan is to casually shoot another 500. Disassemble and properly lubricate it...

I tried turning it out until it wouldn’t fire but that only left me with 1.5 threads of engagement in the block, that was before...

It's 6:45 here in Tucson , Az , and thank goodness it cooled down to 107° it was 112 Yeah I use .065 line as a pull through to clean...

Been an amazingly accurate rifle as is lol. Until yesterday!!

If you want to stick to pcp then check the Gauntlet 2 in .25, mine would be very good for that. If you’re open to other possibilities I...

Well, that's a whole other issue. I can't believe everything is aligned after that. Clipping would be an issue.

Also on very firmly. Was thinking of replacing the oring but i dont seem to have an 113 orings.

Primarily for iguana control in my yard and I believe I will get into rabbit hunting in the everglades at some point. Im leaning towards...

Is that scuba shop still filling up tanks and do all tanks have to be certified I have a scott carbon fiber tank I've been feeling with...

Correct. Been that way for years now. Even tried pounding on them with a wood dowel, nothing.

Is the air stripper attached correctly.

Worth a try. Thanks

This listing has been renewed

So you removed the complete shroud and removed the end cap at the muzzle end and inserted something through the receiver end and no...