Latest activity

Iowa Airgunner · Apr 21, 2025

Just thinking about this post. My first gun is this Browning leverage under lever. It was a big deal to buy a real gun and scope. But with Mikes help at flying dragon and a LOT of pellets I could shoot the gun well enough to say I am ready for a TX200 and a serous piece of glass. Then head for the nationals.
Today I dusted the gun off after offering it for sale at the Indiana gun show for 150 bucks.
I have a friend that wants to learn to shoot. He has the 2000 dollars but has no idea what to buy So I’m gonna lend hime all kinds of different guns to take home and practice and learn to shoot. First off is a springer with a creepy trigger.
If he can shoot this, he can shoot anything.
I wanted to sight it in for him at 17. That’s my home range distance and a good start point.
But my point is this gun coast 150 bucks and puts five pellets under a dime at 25 yards with ease.
So does my 1500 TX 200. And a pull the last shot with both anyhow. Haha

moodyblues · Apr 21, 2025

CharlieF said:
In order to get any useful information you need to also provide calibre and if possible age.

Sorry they’re all 177

No idea on age

SLICKNICK · Apr 21, 2025

Add that, and you can use it when you shoot without level falling off https://www.mkmachining.com/product/rail-mounted-level/

Avator · Apr 21, 2025

My shooting setup of the day...

Richieg · Apr 21, 2025

I have my day/night scopes,as,well as thermals set at 1 on the reticle brigjtness when using them at night. If I set it any higher, my reticle eye after looking thru the scopes at night, is washed out and blind.

BriarpatchMtn · Apr 21, 2025

1st 10 meter PCP. Received free be pure chance.
No where close to everyone's pic's I see here. And I was shooting off a tripod, 10yds is best I can get shooting wall to wall.
Totally different than my big bore and something to get used to.

thammer · Apr 21, 2025

Wanted a longer barrel but not a longer OAL and to keep it looking original. 16" barrel. It's one of the rarer ones in .25cal shooting 26gr hades at 860-880fps. No choke so 25gr or so slugs also shoot pretty well. Only a magazine (10 shots a fill if I max out at 55fpe) I prefer to get more shots so I have it down around 45fpe so I can get a few mags a fill. Not bad for a 24" overall length.

Avator · Apr 21, 2025

I also have the Maple and the Big Air mags.

Avator · Apr 21, 2025

Matt7467 said:
Will check it out thanks

Be careful that all those little parts go in exactly like the video shows. Some pins from the bottom and others from the top.

steve123 · Apr 21, 2025

Twiceshy said:
What about adjustable parallax? Is that an important feature to have? I do shoot in my back yard at around 67 feet to target but I may go for longer distance shots at a range sometime.

It's not just to dial out parallax but also to focus the image so for me it's very important.

JaceSpace1369 · Apr 21, 2025

Matt7467 said:
Not a magazine issue. I have another Notos so I have multiple mags and does it with all of them. Even does it with both the single shot tray I have. Tried with Maple mags, Big Air, and Orion. That was my first thought as my other Notos had mag issues. The probe is noticeably more "wobbly" when moving compared to my other one

Gotcha, mine did it while being wobbly and the issue was solved by getting an aftermarket mag, yours is clearly has a larger issue at play.

JaceSpace1369 · Apr 21, 2025

Avator said:
Big Air Precision makes some nice NOTOS magazines but I read that you said it wasn't a magazine issue.
This video make help you understand the NOTOS bolt and cocking lever assembly. The only difference is that the NOTOS lever is on the opposite side.

The issue with the probe being loose causes hang ups as the pellet exits the factory magazine, because it goes in cockeyed into the breech. Getting a Big Air Precision mag fixes the issue as it forces the probe to only go straight.

CharlieF · Apr 21, 2025

I think we may be pole vaulting over mouse droppings.

BoerneAirgunner · Apr 21, 2025

SLICKNICK said:
https://www.amazon.com/Klein-Tools-935DAG-Electronic-Measures/dp/B07ZWW3BW5/ref=pd_bxgy_d_sccl_2/131-4982385-6887657?pd_rd_w=BpUAt&content-id=amzn1.sym.de9a1315-b9df-4c24-863c-7afcb2e4cc0a&pf_rd_p=de9a1315-b9df-4c24-863c-7afcb2e4cc0a&pf_rd_r=T4EC202TM3J62Q4V0DF5&pd_rd_wg=CPQkm&pd_rd_r=1b620854-684c-4a21-b827-b3bfef6d2df1&pd_rd_i=B07ZWW3BW5&th=1
Use a bigger one lol
No need to see, just need to listen. beeps if canted

This is what I use to level scopes. Much more sensitive and accurate than a bubble.

Avator · Apr 21, 2025

Big Air Precision makes some nice NOTOS magazines but I read that you said it wasn't a magazine issue.
This video make help you understand the NOTOS bolt and cocking lever assembly. The only difference is that the NOTOS lever is on the opposite side.

XSUltimate · Apr 21, 2025

Impressive shooting from everyone! Way to go guys!!!!!
Thx
Dan

CharlieF · Apr 21, 2025

The ants love you.

CharlieF · Apr 21, 2025

In order to get any useful information you need to also provide calibre and if possible age.

JaceSpace1369 · Apr 21, 2025

Matt7467 said:
Hey all. So I have a new to me Notos bottle build. Only had it for about 2 months. It was purchased from a forum member who got it off another forum member if I remember correctly.

I'm having a big issue with the bolt probe or pellet probe, not sure which term is correct. It's not to the typical Notos magazine issue, I have a lot of different Notos mags from aftermarket companies and all have the same issue. It even messed up one of my Maple mags in the process, which was also partly my fault for forcing the cocking level because the pellet was so mangled I couldn't push it back through the barrel to remove the magazine. The probe is extremely loose and moves around until it engages the tapered thicker end, then it sits solid. It doesn't the same thing with a single shot tray when loading. Catches the pellet it a weird angle and lowers the head of the pellets and raises the skirt while going into the chamber. You still have to force the pellet and deform it using the single shot tray, also have more than one single shot tray and happens with both. If I load a single pellet without a tray, which takes forever with my fat fingers and scope setup, the gun shoots great.

My question is does anyone know of a fix for this? Can the probe be tightened back into alignment or does it need to be replaced? Is it a thing to replace? I've looked and haven't found anything for a replacement probe online. Did a search here and didn't see anything on the issue, although I may be searching the wrong terminology.

Hoping to get this figured out so I can have the motivation to track down the slow leak it's had since arriving. Don't really have much motivation to fix it when it takes 10 minutes, definitely exaggerating, to load a single pellet. I've attached some videos to better describe the issue. Any help of insight would be greatly appreciated.

View attachment 557055

The easiest fix is to buy new magazines, this is a known issue for the notos since it came out.

AirShootist · Apr 21, 2025

This listing has been renewed

Dave~H · Apr 21, 2025

Ok so until I find something a little more proper I used a 7/32 drill bit and wrapped some duct tape around it and eyeballed about 1/2 way between a 5/16 and 3/8 drill bit which puts me in the ballpark for a .35 cal plug (shooting .22 today). It’s just for practice at home.

kromc5 · Apr 21, 2025

JimD said:
I haven't shot a Hueben but the reviews indicate it is pretty quiet. May not be audible if the tractor is running. It's shroud is baffled. My Avenger is my only airgun that didn't have reasonably effective baffles in the shroud. And if you decide to add a moderator no tax stamp or permit is required.

Depending on whether I'm further out in the field, I would not have to worry, but I need something quiet when I get near the house. I have an older Rattler 384 thermal I used on my .22LR. Would enjoy getting back to shooting from the lower side of our house at night without worrying about neighbors.

moodyblues · Apr 21, 2025

FWB P70
RWS 460
Anschutz 2025
FWB 300s

I’ll update when I get the model of the last two.

Zeke G. · Apr 21, 2025

SilentSquirrel said:
I recall reading a thread about doing that to a Whisper Fusion Gen2
However, I cannot remember if it was here on AGN or on GTA
I can search later tonight, but you might as well get a head start @Zeke G.

Hope this helps
Edward

Did search and found some info on gta. Seems you just remove the mechanism and it's a regular break barrel. I'll report my efforts if anyone is interested.

Michael · Apr 21, 2025

BoerneAirgunner said:
I just received my Impulse Air Complete Arca Support package. Michael was dead on!! This rest is super light and goes very well with the DRS Tactical. Time to go pesting!!!

View attachment 557046

Yeah buddy! I typically only use stuff I REALLY like.

Have fun

Latest activity

Latest activity

Attachments

Kral Arms Punching above it's weight class.

Filter