If you have FB here is a link to the rain condition Bob had to shoot in.

Genob said:

Yes I do it all the time. This one I use black Delrin, I also open the transfer tube to get more air to the puppet valve.

View attachment 584785

View attachment 584786

View attachment 584787

Click to expand...

That’s ingenious of you to…did you have to modify the brass portion of the poppet valve to fit that style seal you made or does it just press in…if it is a drop in style ..don’t stop there I could use 3 of them and you will be handsomely rewarded …lol

It was a fabulous morning.

airgunfans said:

Thanks for the info. Pretty much a dead end ..... I wonder why Feinwerkbau makes the life of their products' owners so difficult .....

Click to expand...

Liability? Also I think the ten meter official bodies require the date stamps on them to ensure safety of the competitors?

Just order a new cylinder.

Impact M3 500mm .22

25.39g Hades Monsters

135 front reg / 115 rear reg

3.75 hammer

3.5 lines on valve adjuster

With these settings I'm slinging the 25.39g Hades Monsters at 880, zerod from 25-45 yards. I used mine for iguana control/hunting and it's very accurate and consistent.

Impact701 said:

They are not a hollow point, they have a flat front.
View attachment 584801

I bought them from Utah Airguns

Click to expand...

Was this recovered? or are they this beat up?

F6Hawk said:

Just got mine the other day, and have begun tuning and sighting it in. Couple of questions for any who have used this gun already...

1) Max fill is 300 bar. Gauge on the gun says 300 bar, but on my valve (much more accurate, I'm guessing) says about 210. Is this what others are seeing as well?

2) Regulator came from the factory set to about 210 bar. Seems kind of high to me. What are any of youz using for regulated pressure?

TIA

Click to expand...

The aea SF uses a similar air tube and regulator set up. The reg pressure on the SF are typically between 150-200 bar. I would double check and see if karma wants you to drain the air from gun to turn the regulator down. I know going up under pressure is ok.

I thought I was all done for the day when the mail lady walked in the backyard and called a cease fire…lol..she was dropping 2 more pistols for me..A Healthways plainsman 175 and a Marksman plainsman 1045…I own a Healthways 175 but that one used 8 gram sparklets..hard to come by …so I started using Wippets..that they used for whip cream dispensary..N20.. gas…seriously…LOL..I also used in my dirt bike to get the hole shot money..anyway’s I converted it to 12 grams .. have 2 out of 3 working and surprisingly for a Spit Shooter it hits decent.. am not even going to make the more accurate that would defeat the purpose of this gun..they were made to keep pulling the trigger till you hit something or you run out of gas or ammo what ever comes first

markhooper said:

looks like a hollow point but it also looks like the hollow point is filled with something?
I'd be interested in the slugs hollow point boat tail of you find them.
where did you buy the slugs?
Mark

Click to expand...

They are not a hollow point, they have a flat front.


I bought them from Utah Airguns

I was just shooting at mine today !

Some fun this morning with the 2240

Shot the D 250 and 2240 before going to town.

I know that Corbin, Air Marksman and Dead lead all use pure lead. NSA has historically but only in their swaged rounds which they aren't running right now because they sold the company. Many of these others are using older "punch" presses and pure lead is not usable with them. Altaros, is one of the hardest slugs because they turn them on a lathe.

Hateful McNasty said:

If ya ain't going to work out with it may as well let it work out for you

Click to expand...

LOL... workouts these days consist of rolling out of bed and getting a shower.

The north-west side of the Netherlands, Noord Holland.
Europe

looks like a hollow point but it also looks like the hollow point is filled with something?
I'd be interested in the slugs hollow point boat tail of you find them.
where did you buy the slugs?
Mark