Latest activity

MRG · Wednesday at 5:12 PM

Croxton63 said:
Once you have 10 posts (to help reduce the likelihood that you’re a bot or a charlatan) you can sell it on the classified section here. There are a lot of scammers around. Anything that you can do to show you’re not one will reduce the wariness that people naturally have. If you contribute to discussions and ask relevant questions it helps establish your credibility. I have bought a few things (and sold one thing) on these classifieds, but before I deal with a seller or a buyer I take my time and read through their posts to work out if I want to interact with them or not. Responding to this will get you a 7th post.

Thank you for explaining how this works.

Powerstroke · Wednesday at 5:12 PM

Purchased about 3 months ago. Excellent condition. Works as advertised!
$435.00 Shipped…

PayPal Only!

tstrever · Wednesday at 5:09 PM

This listing has been renewed

Struckat · Wednesday at 5:09 PM

AA Falcons, 13.43, all of my .22s shoot them well.

beerthief · Wednesday at 5:08 PM

Sighted in Diana model 60 .177 Tenex 4.52 8.4 grain 580 FPS

@ 20 yards

rrann · Wednesday at 5:08 PM

Hey everyone, sign up and come out to Raton. It's a great place to shoot, beautiful scenery and visiting with everyone makes it all worth the trip!!!
The N50 Group works hard to put this match on!! ...So COME ON DOWN Y'all...
Randy

shambozzie · Wednesday at 4:57 PM

Come
on guys, 175 yds on a ground sqirrel with 100 fpe will do it humanity. Add a little 5/7 wind to the mix, squirrel not practically instered in photo-op. Your s#^@ better be right . A hpbt at that distance works for me. We,all want that head shot.

rangur1 · Wednesday at 4:51 PM

Have a replacement air tube epic sells. 240cc tube with 101cc plenum. The plenum has a scuff on it. Tube is new. $85 PayPal F&F, conus, shipping included. This is just the 2 tubes, no reg or end gage. Just as edgun west sells them. Thanks.

james722 · Wednesday at 4:48 PM

I just read this on HAM.

Have A Macavity Arms MA2 PCP Air Rifle? You Must Read This! - Hard Air Magazine

If you have a Macavity Arms MA2 PCP air rifle you must read this! The company has issued an urgent Service Bulletin related to the product.

hardairmagazine.com

TonyG_865 · Wednesday at 4:48 PM

Does anyone know if Tuxing and Air Marksman are made by the same manufacturer? or if they work together in some sort of capacity? I'm asking because I wanted to buy an Air Marksman air cylinder and my local airgun shop tried to sell me a Tuxing air cylinder 580cc for $400 and say that it's an Air Marksman and the only difference is that it says "Tuxing" on the bottle. To my knowledge, Tuxing is a completely different brand than A.M.

rangur1 · Wednesday at 4:44 PM

Have an Epic 2 LW polygon barrel 550mm. Comes with transfer port and valve and o ring. Slight scuff by muzzle on the 1/2x20 adapter. Lightly used. No more than 40-50 shots. $285 shipping included, PayPal F&F , conus.

WillM · Wednesday at 4:40 PM

I’m the one who told you to twist and it works for me. Didn’t seem especially tight.
I have been getting fliers randomly with my .22 BW to the point that I took it in to AOA and they pulled the shroud, pulled the barrel and checked everything and got it to shoot a good group at 20 yards. I have not been able to replicate that even though I can do it with my RW so it’s not me.
Today I shot with shroud off and on and grouping is worse than ever - 6” and not consistent shot to shot although I did get three shots out of 25 to touch (and then the fourth was inches away).
I looked at barrel and muzzle with Borescope and don’t see clipping but barrel seems to be very leaded so I’m going to clean it (again) and maybe polish it.
Suggestions or ideas appreciated

borne2fly · Wednesday at 4:38 PM

sekiar said:
Love mine! Charles

Charles, just FYI if you find your barrel shroud coming loose (the set screw really isn’t adequate) you can epoxy it in place. I did that to mine.
Not sure about the M712 but real C96’s offered different barrel lengths. I’ve thought about getting a second one and modifying the length of the barrel and shroud. I extended the barrel and shroud on an old Crosman MK1 and it increased both the fps and accuracy. But for the M712 I might go the other way and shorten it since I’m often switching to full auto and aiming at targets within 5 yards

Hunter25 · Wednesday at 4:37 PM

Hunter25 said:
There's a detailed thread on utube by pj Clark that will tell you exactly how to do it. It's not that difficult from what I seen. It's an 8 part thing. The one that says internals should tell you exactly how to do what your wanting. I'd suggest that since you own a 2400$ gun that you watch them All. I own a panda,and i did. Learnt alot from it also. Pj explains everything near about. If you type Redpanda in utube,the vids will pop up.

I do believe on the slug guns the second reg is wide open,or should be. My pellet version of 30 caliber second reg is at 2800 while first is at 1900. Refresh is instant for 24 shots from a 4300psl fill.

SpreadLead · Wednesday at 4:34 PM

This listing has been renewed

JimmyV · Wednesday at 4:33 PM

Zut said:
I bought the HW35E from Krale a few months ago. Great gun, you won't regret getting one. Krale has the Beech model in stock for $339.00 plus $52.00 shipping. I received mine in 3 days.

Unless you have to have the finger groove I would just get a new one. The new style stock is pretty easy on the eyes and the checkering on the forearm makes it easy to grip.

It is very accurate with H&N Field Target Trophy's

Z

View attachment 288566

I got one from krale the tube was so out of round it wo chronograph any where between 380 and 590, junk it was.

Hunter25 · Wednesday at 4:33 PM

rodjava said:
I have the .30 cal Red Panda that was tuned for slugs directly from Karma. I shoot a 77 grain boat tail slug at 950 fps at 200 yards. I'm setting up the RP to shoot 200 yard bench rest targets.

Karma/Donnny FL presets the #1 regulator at 3000 psi and suggest that it should not be changed by the user.

However, my best tune for 77 grain slugs at 950 fps is to set my #2 regulator at 2950 psi. Now that I have a digital manometer on the #2 regulator, it takes an average of 1:45 seconds after each shot to obtain 2950 psi for the next shot.

The longer my shooting session, the longer it takes to get back to 2950 after each shot. The last shot I took today took 2:30 seconds.

I shoot tethered and have my external tank set to 3100 psi.

I believe it takes so long to refill the plenum to 2950 psi for each shot is because the #1 regulator and #2 regulator are both almost the same. 3000/2950 psi

As I mentioned, Karma/Donny FL does not recommend to make any adjustments to the #1 regulator. It's a pain the arse to wait 2 mins before each shot!

So, how do I do it? I just want the #1 regulator to be 10-20 psi higher or 3020 psi instead of 3000 psi.

Rod in San Francisco.

There's a detailed thread on utube by pj Clark that will tell you exactly how to do it. It's not that difficult from what I seen. It's an 8 part thing. The one that says internals should tell you exactly how to do what your wanting. I'd suggest that since you own a 2400$ gun that you watch them All. I own a panda,and i did. Learnt alot from it also. Pj explains everything near about. If you type Redpanda in utube,the vids will pop up.

Louie4321 · Wednesday at 4:30 PM

This listing has been renewed

Gerry52 · Wednesday at 4:28 PM

In answer to "go to" guns. Either my FX Boss (.30) or my .22 Edgun R3 long (Slug gun). You can easily bait the ground squirrels with Black Oil Sunflower seeds or watermelon cut into small chunks. They find both irresistible & will sit still long enough to zero in on them.

Huntnhumans · Wednesday at 4:28 PM

This listing has been renewed

Ries · Wednesday at 4:25 PM

The tests I have done really makes clear the oring is the problem.

Not sure if FX changed it alteady without editing the drawing.

ZeroVibe · Wednesday at 4:24 PM

Racer88 said:
View attachment 571477

I've spent that much stocking up on pellets for my first air rifle, and I've only had it a few weeks!

My current pellet consumption borders on the absurd as far as I'm concerned. Though I think I found two different brands of 25.39 pellets the crown likes, so that should help keep my expenditure on pellets stable...which still remains absurd.

Florida_Man · Wednesday at 4:20 PM

Casual shooting.

Gerry52 · Wednesday at 4:19 PM

elwoodblues said:
Why don't you get it hydro tested cost's about 30 bucks, What city are you in or near?

OP doesn't state the mfg date, only that it's out of Hydro. If tank is older than 15 years no one can LEGALLY hydrotest.

rangur1 · Wednesday at 4:17 PM

More for budget offerings. Will do video descriptions, it’s easier. $50 shipping included. PayPal F&F, conus. Thank you.

Latest activity

Latest activity

Chronographs SOLD Garmin Xero C1 Pro

Accessories WTS Epic 2 Air cylinder and plenum - reduced

Sticky Macavity Arms Have A Macavity Arms MA2 PCP Air Rifle? You Must Read This!

Question N/A is TUXING the same as AIRMARKSMAN?

Barrels WTS Epic 2 550mm LW polygon 25cal - reduced

Projectiles SOLD Array of 22 cal pellets - sold pending funds

Filter

Sticky

Macavity Arms Have A Macavity Arms MA2 PCP Air Rifle? You Must Read This!

Question

N/A is TUXING the same as AIRMARKSMAN?