Latest activity

fishing43 · Aug 16, 2025

Now you are a full fledged member, congratulations and look forward to your post. Thank you for joining

coastal drifter · Aug 16, 2025

Hateful McNasty said:
I listened to it all. Never know when its a jeopardy category or swinging a deal ...

Waylon, led, doors, and the great florida boys ( not the gospel singers ) Lynyrd Skynyrd . I guess i got favorite from kid to today's . Also theres alot i just cant stomach too. Lol

muscle shoals

Bigbaby · Aug 16, 2025

Avator said:
Looks great.
I was able to shoot a good bit today. I would shoot awhile then duck into the shop or the house to cool off then go back out and shoot some more. I run the compressors in the a/c in the shop so filling guns also gives me a break from the heat. A least the temps are dropping some. We may be over the hump.

I fill from my tank so no breaks from the heat to refill my AR, the tank usually lasts a week then gets topped off inside. Even inside, I run the compressed air through a couple of moisture absorption filters to ensure no moisture makes it into the tank and then my AR. If I stopped shooting to refill my AR with the compressor, I’d probably get distracted and end up taking another nap.

Joshua777 · Aug 16, 2025

ok so bought this used, small leak. went to fix ,made worse. been a leaker since i got it . anyone out their repair/fix/work on these/? thanks j

igolfat8 · Aug 16, 2025

ALL 3 sets of 30mm rings sold pending payment. 1" rings still available.

I have ~~3 sets of Dovetail 30mm FX adjustable height rings~~ and 1 set of 1” FX adjustable height Dovetail rings. I’m the original owner and they are used but not abused.

$55 per set shipped in lower 48. PayPal or Money order.

I’ve sold lots of stuff here with 100% positive feedback so buy with confidence.

Only trade I’d consider is FX Picatinny rings.

cavedweller · Aug 16, 2025

woogie_man said:
Ok guys.... here is one for you.

I have been adding more Theobens to the safe and I am wanting to add more spares to make sure I can keep things running. I took a look over at the RAW site and found the spares that I am wanting......BUT....... the shipping rates are NUTS! For 10 little bits and bobs,

Barrel location screw for Rapids × 2
Bottle "O" rings (pack of 5) × 1
Bolt Circlip × 5
Authentic RAW Rapid Air Worx PVC Patch × 1
RAW Pressure Guage × 1

and the shipping is around $30!! These are all little parts that should be able to fit into a padded envelope!

Is there another source for reliable parts that are not going to cost half the amount of the of the parts for shipping?

Call RAW and discuss

DeanB · Aug 16, 2025

BriarpatchMtn said:
A few minutes with a utility knife. Junk into a target stand. Leave out in the weather no problem. Shot it and break it, easily replaced with another piece of junk.

View attachment 586415

View attachment 586416

View attachment 586417

View attachment 586418

View attachment 586419

Neat idea, could of left rest of frame up and put spinners out on the arms.

Joshua777 · Aug 16, 2025

This listing has been renewed

woogie_man · Aug 16, 2025

Ok guys.... here is one for you.

I have been adding more Theobens to the safe and I am wanting to add more spares to make sure I can keep things running. I took a look over at the RAW site and found the spares that I am wanting......BUT....... the shipping rates are NUTS! For 10 little bits and bobs,

Barrel location screw for Rapids × 2
Bottle "O" rings (pack of 5) × 1
Bolt Circlip × 5
Authentic RAW Rapid Air Worx PVC Patch × 1
RAW Pressure Guage × 1

and the shipping is around $30!! These are all little parts that should be able to fit into a padded envelope!

Is there another source for reliable parts that are not going to cost half the amount of the of the parts for shipping?

Cantona256 · Aug 16, 2025

Mandrada01 said:
Yessir,

Pushing a 28 grain pellet at about 930fps. Dressed it all up and will be having smoke rabbit for dinner tmw.

Perfection!

DesertSilver · Aug 16, 2025

The mount looks like the 1 bakers sells for $65

One Piece Scope Mount for Sheridan F and C, Blue & Silver Streak - Baker Airguns

Save $2.98 on scope rings ($21.97 reg price) when added to the order. High profile rings recommended for bolt handle clearance. Rifle not included

www.bakerairguns.com

Avator · Aug 16, 2025

Bigbaby said:
Lower Alabama? I’m in Eight Mile. When it cools off enough to shoot in the afternoons (with a fan and a big umbrella), the showers and thunderstorms roll in. Made it out today to get an hour of practice in with the DRS Tactical .25. I cut my deck railing down for my built in bench.
View attachment 586647

Looks great.
I was able to shoot a good bit today. I would shoot awhile then duck into the shop or the house to cool off then go back out and shoot some more. I run the compressors in the a/c in the shop so filling guns also gives me a break from the heat. A least the temps are dropping some. We may be over the hump.

RoosterCogburn · Aug 16, 2025

Joe-Smith said:
Impulse Air IA-1350 Moderator is what Utah Airguns is pushing.
Looking at a .25 cal and wondering if this is actually any quieter in use than any of the others?

Definitely performs. Ia1350 on my impact .22 700 Shooting 34grs at 975 sounds like my dreamline shooting 25.39s at 890

bchannell · Aug 16, 2025

I don't mind it updating, after the growing pains I've had no problems with updates.....obviously, I never knew when it updated.

woogie_man · Aug 16, 2025

Looking at that first picture..... why not find one of those broken camp chairs and use that? Typically, you can find these at garage sales for really cheap, or even in the garbage. Cheap and if you shoot it you are out nothing.

Bigbaby · Aug 16, 2025

Avator said:
Thanks for the kind words...
Good chance of rain today and even though it's under shelter I don't like to expose my shooting equipment to all that moisture in the air. It's already bad enough that we have everyday high levels of humidity here in lower Alabama without adding rain.
I'd like to get my .25 Avenger with the Buck Rail Tactical kit out and do some shooting from the new bench but we'll have to see what the weather does.
Might just hang out in the climate controlled shop and tinker with the DLX Windows software for the Pro Chrono instead. I can open the shooting window and keep most of that moisture out.
BTW... I only run my compressors in the climate controlled shop and have yet to see any signs of moisture in any of my guns that I've checked

Avator said:
Thanks for the kind words...
Good chance of rain today and even though it's under shelter I don't like to expose my shooting equipment to all that moisture in the air. It's already bad enough that we have everyday high levels of humidity here in lower Alabama without adding rain.
I'd like to get my .25 Avenger with the Buck Rail Tactical kit out and do some shooting from the new bench but we'll have to see what the weather does.
Might just hang out in the climate controlled shop and tinker with the DLX Windows software for the Pro Chrono instead. I can open the shooting window and keep most of that moisture out.
BTW... I only run my compressors in the climate controlled shop and have yet to see any signs of moisture in any of my guns that I've checked.

Lower Alabama? I’m in Eight Mile. When it cools off enough to shoot in the afternoons (with a fan and a big umbrella), the showers and thunderstorms roll in. Made it out today to get an hour of practice in with the DRS Tactical .25. I cut my deck railing down for my built in bench.

beerthief · Aug 16, 2025

just re read this thread and watched the vid again . you guys made m go out in 95 degrees and shoot my 1977 Sheridan .20 . THANKYOU . haven't shot it in a few.

ZekeZX10 · Aug 16, 2025

Redtailhawk said:
Here's what mine is showing in sub 12

View attachment 585310

I put in your settings and it wouldn't even push the 13.43g JSB knockouts out of the barrel lol....I do want it low power for just plinking in the backyard, like 7fpe was the goal but here is the settings I ended up with, just over 8fpe. I wander why the huge discrepancy in settings. Do you have the redwolf or the pulsar and actually i thought cpu was the same.

Your volts were 48.75 and I had to increase that to 56.025, the pulse durations I added 100 to each of your settings

no2gates · Aug 16, 2025

Know what is great and free? The day after an election, pull up some of the coroboard signs that litter the area and use those. They won't have to pull them up, and you get them free. Win-Win

CCook · Aug 16, 2025

Just call Umarex that’s what I did and they took care of it.

Regal_US · Aug 16, 2025

Great shooting. Chalk is a lot of fun.

There's another way to play this game: see how many hits you can get on each piece of chalk. Start shooting act the top and nibble your way down. Misses count as a negative value. You might be surprised how many times you can take a chunk out of a chalk bar.

JeffG · Aug 16, 2025

JeffG said:
Just saw this reply. I’ll have to try that and see if it works. I have to find that screw you are talking about.

Got it resolved! Same way you suggested in this thread. All is good now and the gun is filling normal again. Thanks!!

Joe-Smith · Aug 16, 2025

Impulse Air IA-1350 Moderator is what Utah Airguns is pushing.
Looking at a .25 cal and wondering if this is actually any quieter in use than any of the others?

Maizen · Aug 16, 2025

This listing has been renewed

beerthief · Aug 16, 2025

crowski said:
Knock me out. So cool. One day. Crow

i believe it is older than i am ?. I do not remember . SN#3997

Latest activity

Latest activity

Air Venturi Avenge x pressure gauge busted when tightened! HELP!!!

Mounts/Rings WTS FX No Limit Rings

Theoben Theoben Parts....??

Filter