woogie_man said:

Ok guys.... here is one for you.

I have been adding more Theobens to the safe and I am wanting to add more spares to make sure I can keep things running. I took a look over at the RAW site and found the spares that I am wanting......BUT....... the shipping rates are NUTS! For 10 little bits and bobs,

Barrel location screw for Rapids × 2
Bottle "O" rings (pack of 5) × 1
Bolt Circlip × 5
Authentic RAW Rapid Air Worx PVC Patch × 1
RAW Pressure Guage × 1

and the shipping is around $30!! These are all little parts that should be able to fit into a padded envelope!

Is there another source for reliable parts that are not going to cost half the amount of the of the parts for shipping?

Click to expand...

Call RAW and discuss

BriarpatchMtn said:

A few minutes with a utility knife. Junk into a target stand. Leave out in the weather no problem. Shot it and break it, easily replaced with another piece of junk.

View attachment 586415

View attachment 586416

View attachment 586417

View attachment 586418

View attachment 586419

Click to expand...

Neat idea, could of left rest of frame up and put spinners out on the arms.

This listing has been renewed

Mandrada01 said:

Yessir,

Pushing a 28 grain pellet at about 930fps. Dressed it all up and will be having smoke rabbit for dinner tmw.

Click to expand...

Perfection!

The mount looks like the 1 bakers sells for $65

Bigbaby said:

Lower Alabama? I’m in Eight Mile. When it cools off enough to shoot in the afternoons (with a fan and a big umbrella), the showers and thunderstorms roll in. Made it out today to get an hour of practice in with the DRS Tactical .25. I cut my deck railing down for my built in bench.
View attachment 586647

Click to expand...

Looks great.
I was able to shoot a good bit today. I would shoot awhile then duck into the shop or the house to cool off then go back out and shoot some more. I run the compressors in the a/c in the shop so filling guns also gives me a break from the heat. A least the temps are dropping some. We may be over the hump.

Joe-Smith said:

Impulse Air IA-1350 Moderator is what Utah Airguns is pushing.
Looking at a .25 cal and wondering if this is actually any quieter in use than any of the others?

Click to expand...

Definitely performs. Ia1350 on my impact .22 700 Shooting 34grs at 975 sounds like my dreamline shooting 25.39s at 890

I don't mind it updating, after the growing pains I've had no problems with updates.....obviously, I never knew when it updated.

Looking at that first picture..... why not find one of those broken camp chairs and use that? Typically, you can find these at garage sales for really cheap, or even in the garbage. Cheap and if you shoot it you are out nothing.

Avator said:

Thanks for the kind words...
Good chance of rain today and even though it's under shelter I don't like to expose my shooting equipment to all that moisture in the air. It's already bad enough that we have everyday high levels of humidity here in lower Alabama without adding rain.
I'd like to get my .25 Avenger with the Buck Rail Tactical kit out and do some shooting from the new bench but we'll have to see what the weather does.
Might just hang out in the climate controlled shop and tinker with the DLX Windows software for the Pro Chrono instead. I can open the shooting window and keep most of that moisture out.
BTW... I only run my compressors in the climate controlled shop and have yet to see any signs of moisture in any of my guns that I've checked

Click to expand...

Avator said:

Thanks for the kind words...
Good chance of rain today and even though it's under shelter I don't like to expose my shooting equipment to all that moisture in the air. It's already bad enough that we have everyday high levels of humidity here in lower Alabama without adding rain.
I'd like to get my .25 Avenger with the Buck Rail Tactical kit out and do some shooting from the new bench but we'll have to see what the weather does.
Might just hang out in the climate controlled shop and tinker with the DLX Windows software for the Pro Chrono instead. I can open the shooting window and keep most of that moisture out.
BTW... I only run my compressors in the climate controlled shop and have yet to see any signs of moisture in any of my guns that I've checked.

Click to expand...

Lower Alabama? I’m in Eight Mile. When it cools off enough to shoot in the afternoons (with a fan and a big umbrella), the showers and thunderstorms roll in. Made it out today to get an hour of practice in with the DRS Tactical .25. I cut my deck railing down for my built in bench.

just re read this thread and watched the vid again . you guys made m go out in 95 degrees and shoot my 1977 Sheridan .20 . THANKYOU . haven't shot it in a few.

Redtailhawk said:

Here's what mine is showing in sub 12

View attachment 585310

Click to expand...

I put in your settings and it wouldn't even push the 13.43g JSB knockouts out of the barrel lol....I do want it low power for just plinking in the backyard, like 7fpe was the goal but here is the settings I ended up with, just over 8fpe. I wander why the huge discrepancy in settings. Do you have the redwolf or the pulsar and actually i thought cpu was the same.

Your volts were 48.75 and I had to increase that to 56.025, the pulse durations I added 100 to each of your settings

Know what is great and free? The day after an election, pull up some of the coroboard signs that litter the area and use those. They won't have to pull them up, and you get them free. Win-Win

Just call Umarex that’s what I did and they took care of it.

Great shooting. Chalk is a lot of fun.

There's another way to play this game: see how many hits you can get on each piece of chalk. Start shooting act the top and nibble your way down. Misses count as a negative value. You might be surprised how many times you can take a chunk out of a chalk bar.

JeffG said:

Just saw this reply. I’ll have to try that and see if it works. I have to find that screw you are talking about.

Click to expand...

Got it resolved! Same way you suggested in this thread. All is good now and the gun is filling normal again. Thanks!!

Impulse Air IA-1350 Moderator is what Utah Airguns is pushing.
Looking at a .25 cal and wondering if this is actually any quieter in use than any of the others?

This listing has been renewed

crowski said:

Knock me out. So cool. One day. Crow

Click to expand...

i believe it is older than i am ?. I do not remember . SN#3997

This listing has been renewed

50 yard zero on paper and a couple birds, 68 and 91 yards.

Talked to Shane at AoA regarding the long ramp up before the velocity stabilizes in advanced mode. He suggested putting 5-10 drops of silicone oil into the gun from the vent hole that is on the bottom of the metal part of the receiver behind the grip almost all the way plastic part that houses the computer and display. The hole is an atmospheric vent that connects to a chamber that leads to the valve and some moving part with an o-ring. Apparently this o-ring can get dry and cause the type of issue I am seeing. Did the silicone oil treatment and let the rifle sit muzzle down so the oil would get up to the mechanism. Definitely seeing a marked improvement with it taking 4-5 shot to stabilize. Will see if some shooting gets the lube where it needs to be. If not will try another round of silicone oil. If that doesn’t do it Shane is going to have me send the rifle back and they will pull the valve and lube the o-ring directly.

Working on making my own magazines as the factory price is crazy. Got some CARM magazines and the work great but with the change coming up regarding de minimus tariff ending making the delivered price unknown thought I would make some. First ones were filament printed but the rotation was not as smooth as I wanted. Current pictured version is SLA printed. Runs super smooth but the lid where the hinge pins are is a little delicate. Will do more testing and may try a hybrid with a filament printed lid and the rest SLA. Hardest part was figuring out the mandrel size to wind the spring on. Only bought pieces are the flat head screw that holds the rotating part to the body, the hinge pins, and the magnets.

beerthief said:

95 desrees /62% humidity , not to bad . did some shooting with the BSA break barrel .177 Tenex 4.51 8.2 gr , i should take this hunting squirrels . Very light weight gun and accurate 20 or 30 yards Irons sighted in @ 25 yards. If i sighted it in probably could do 40 yds . easily .View attachment 586632View attachment 586633 if i sighted in @ 40 . ( see the lake way down below this is my back yard range )

Click to expand...

Knock me out. So cool. One day. Crow