Recent content by $p00kygH0ST

Anthony at Talontunes is great, the pelletshop is number 2 for me. But, the absolute best I've ever dealt with is Dean at Huma-Air

My shooting buddy uses a Crown with STX 22/500. we hunt and shoot his yard... but the max shot we have there is 87.6y. Still MOA +/-.2

Try the Hybrids @ 930. 21.0 patriot-.218 @980-990 NSA 20.2 .218 .2175 @ 980-990 That's 45fpe and less

By far, the most rapid to "process" and ship orders I've experienced. I'm in disbelief. First order made at exactly 2:17pm. Shipping information received at 2:42pm. You're my guy now.

I think it was just a very slight internal hs adjustment one tiny 1/16th or maybe 6-8⁰ turn did it. I am content with this.... No more extreme jumps. 48 shots and this is how much I have to spare from 230

I did quote it. For some reason the comment that quotes the whole one was caught by the auto Moderator in the "needs to be approved by mod" status and I deleted it.. it wasn't rude, nor crass so I don't understand why. "1.75 turns on the INTERNAL HST" means on that very screw. On max position...

At 100 a 30fps drop is .5mil difference in drop. I'd call 1.8" off a flier. In terms of hunting... that's still near 1"@50...the difference between hiting or missing a house sparrow, heart shot or low gut shot on a starling, or braining a squirrel or just removing its jaw.

I stated that accuracy was great. And I wasn't referring to a "half or quarter turn" of the power/HS cam wheel, as a 6-13 position adjustment would've been over 100-220fps. However I like to if possible, remedy or identify issues before they become a problem. I'm new to this gun and have never...

I confirm zero on paper at 45... you'd think a velocity drop of 30fps would cause a flyer. One small jagged hole. If it's what you say and I gave her another quarter or half turn or dropped er to maybe 105bar could that remedy?

Trying to perfect a tune. I've been pesting every week heavily and accuracy is outstanding. I've said it in other posts and I'll say it again for the sake of relevance to post. Shooting a Dreamline Tac 25/600 w 290cc Tube. I'm currently set at 108bar on the reg, 17 on the wheel, about 1.75...

You're about to get business that UA could've kept. I spend at least 100 weekly. Taipan or Krait is on the menu next.

I zero at 44 for 2 reasons. I have 3 PRIME locations at my main pesting spot where the sparrows, pigeons and starlings FA AND FO. One happens to be exactly 18.5y from my murder hole, one is 44-47 depending which joist they perch on and the last is 55.1- near 60 depending which branch. 18 and 44...

Are you saying that you're not using an anhydrous ammonia circulating copper heat exchanger? Wtf. FIRST, dry ice packed around the pump, build a heat exchanger and place the circulatory lines in between the radiator fins of the head, make sure you have a good seal on it, anhydrous leaks are...

So I made a thread last month about my brand new .25 Dreamline tac 600mm. (THIS IS ALL WITH 25.39GR JSB/JTS) I'm currently at 108bar, about 1.5 turns on the internal, 20 on the HT Wheel 3 positions shy of max. Getting 861(865)868 and about 45 shots per fill on my 230bar/290cc tube... Next jump...

My lowly dreamline @50 first session post tune 865 25.39s @50. This past Sunday in Oakwood over a feed bin/stable 1mag (16) with me, 9 Starlings, 2 Pigeons, and a house sparrow, closest was 31y out to 88 on a pigeon. 2whiffs and 2 left in the mag.