Recent content by ahmed

I got a POI shift but accuracy was the same. and the POI shift was because the liner was removed and re-installed. When changing the transfer port, did you loosen the liner lock and pulled the liner out a tad? that will allow the transfer port to be properly seated. I only say it because that...

Hi guys, been some time since I have commented.... been busy with life :) I have the Huma duel and the FX power kit. My hammer weight is 7grams anyway so i didn't add the rings, Here are my findings.. Because I ported and modified the stock port and probe, the Huma kit did not give me any...

It looks like Edosan cut the M9 himself, but i could be wrong :)

The pellet probe length is the same, its just the back bit thats different. It will fit your probe holder without effecting pellet seating in barrel. 

Ahhh yours has a hole on side.... mine has none on side or top...must be a manufacturing fault... Better call Huma :(

Hmm no holes at all...

Hi guys, need some help with this. I received my Huma regulator for an FX Impact MKII with a 16mm Rod. Does it have a tiny hole where the red circle is ? mine does not, sorry about the picture i could not get a clearer one. 

https://www.airgunnation.com/topic/fps-jumps-up-what-can-be-the-cause/#post-631902 Centercut !! you are right.. I lubed the spring, hammer and rod thinking that it would be smooth. Will disassemble today and run some tests 

I tried that, I even left the gun and made me a cup of tea then took a shot...totally random for me sadly. But noticed if i turn the power wheel down to like setting 3 FPS will go down to 785 and it will keep a tight number. 

I have been trying to tune my .25 FX Impact today but noticed that 1 out of lets say 5 shots will be a much higher FPS for example. 902 910 905 912 923 <---- 905 904 909 930 <---- what would cause something like this? I do have a C3 delrin installed and I have checked it. This...

wow! now thats something I will do for sure! Love it !

Thank you for the input guys, I will verify with a scope cam tomorrow. What would be the clearest way to see it, shooting at a white wall for example with a reference dot or something?

OK.. today I wanted to verify that my scope is tracking true vertically. So I got a string with a weight on it and hung it over the target then marked a true line, placed a small 1inch by 1inch target at bottom. The picture attached shows how the scope was tracking going up 1Mil every shot. It...

Sorry, I made a mistake on first post and i fixed it, Its 0.25Mils which is 1/4 or 25% of a Mil Thanks for the links guys !! Machael, I printed that picture and pined it on my wall!

Thank you Michael, I have indexed the liner and I am planning to do it again to double check. Because I aligned it for the tightest group i could get, not for vertical POI. Out of interest, what distance is good to index. I did it at my zero distance of 30 meters