I have my YH for about 1 year and a half long enough to realize the problems that this compressor has but we are only costing $ 250, well let's get down to business I started manufacturing a structure where I installed the compressor together with a radiator and an electric motor to cooling it was like this for a couple of months until this started to get too hot due to the high revolutions at which the compressor rotates around 2800rpm according to the manufacturer.This is what causes most failures in this compressor so I started looking for ways to fix this the solution was to remove the winding and the part that is on the shaft I do not remember the name disassemble the crankshaft until I only had the shaft in my hands the shaft was machined to a diameter of 5/8 to install a 6 pulley "together with a 3/4 hp motor at 120v so I managed to lower the RPM to approximately 1000 with this I totally change the operation the cooling is more efficient and the whole system compression rema ins frozen although the filling of weapons and tanks is slower that is not a problem since in my opinion you have more advantages I can fill my tanks without problems and without interruptions due to heating since for 80min of operation the compressor never exceeded 37 degrees Celsius it is worth mentioning that there are no large quantities of refrigerant approximately 2 liters at room temperature.Also, add some time before starting all these modifications, a copper coil to cool the air from the first to the second stage, with which it manages to condense a large amount of so much water that in the small outlet filter there are hardly any traces of humidity so far it works quite well maybe in the future I will add more accessories such as a digital manometer that controls the filling pressure and turns off the engine at the appropriate pressure ...
by the way in the video it seems a little noisy but in reality it is not at all perhaps the microphone of my Smartiphone is somewhat sensitive in reality the compressor is not louder than a blender my wife is very happy about that
https://youtu.be/os5A5FgjuEI
by the way in the video it seems a little noisy but in reality it is not at all perhaps the microphone of my Smartiphone is somewhat sensitive in reality the compressor is not louder than a blender my wife is very happy about that
https://youtu.be/os5A5FgjuEI
