Yong heng compresser

Do a search, I bet others have considered one or own one.

Hi

I have had mine for about a year now. Definitely worth the money

Alex,

I have had the Vevor and the yong heng, both have some problems but if you are mechanically inclined you can get them working good.

Jim

My yong heng has worked flawlessly so far. After handpumping for years, it is wonderful to be able to fill my guns in just minutes with no effort. As far as cost is concerned, I've thrown away more money on cheap airguns than what was paid for the Yong Heng. All you need to do is watch the temperature and keep the oil clean by changing it when needed and the thing should last you a long time. 

My Yong heng has been great so far. The temp gauge quit working a few weeks after I bought it but the vendor was great and sent me a new gauge. I only fill to 4200psi max on tanks because I hear this prolongs the life of them. On rifles I’ll fill to the 4500psi mark since it doesn’t take long. 

Same here. Other than bursting a disc. No issue so far but had the Normad come out earlier, I would have bought the Normad instead because of the lower noise level.

I'm happy with my YongHeng. As others say above, it's good to be mechanically inclined, but for the money it's hard to beat.

I have one too and I'm pretty happy with it. I've just changed the oil after five fills and I mix the oil with Lucas hydraulic lubricant and it works pretty good! I just bought an 88 cu SCBA tank, so it's about to get a workout!

Its worth the money...filling 6 liter tank and guns with it

I Make a break if he reach 50-52 C

And i Use 10-W40 motor oil.

Buy it last april and i am happy with it

To owners of yong hang's. Is the temperature prob in the correct place? And yes it goes in deeper... s it 

yes

I just got one.

Nice.