Yong Heng beginning to fill very slow

PlinkForFun · Jul 14, 2020

Hi all,

My Yong Heng is beginning to fill my BSA superten’s small aluminum bottle very slow. It’s starting to take about 1 minute to fill from 2000-3000 psi, whereas before it would only take about 30 seconds. I made sure that the in-line filter, line, and the fill adapter wasn’t leaking. I’m beginning to become concerned that I might have to disassemble it. Any help would be greatly appreciated!

Thanks, PlinkForFun

Yo · Jul 14, 2020

Sure sounds like a leak.

sonny · Jul 14, 2020

or high pressure piston rings

Yo · Jul 14, 2020

biohazardman · Jul 14, 2020

I agree with the above a leak first and the second stage piston rings second but a minute to fill a gun really is not that long.

PlinkForFun · Jul 14, 2020

I agree with the above a leak first and the second stage piston rings second but a minute to fill a gun really is not that long.

Yes I know, but the bottle on my superten is only like 200cc. It’s pretty small. I’ll have a look again at the compressor pistons tonight. Hopefully I don’t break anything lol.

Yo · Jul 14, 2020

PRAY...

1594778544_7396818125f0e63b0c1abb9.53129911.png

1594778544_12462189115f0e63b0df01b0.92659668.png

Eaglebeak · Jul 15, 2020

Check all the external pipe fittings before even thinking about looking inside. If you have only been filling gun bottles, it is very unlikely that the rings are worn.

PlinkForFun · Jul 15, 2020

Check all the external pipe fittings before even thinking about looking inside. If you have only been filling gun bottles, it is very unlikely that the rings are worn.

Yes you’re right. I decided to put some new Teflon tape on the line, and made sure everything was snug, and that seemed to fix it...

Search

Search

Yong Heng beginning to fill very slow

PlinkForFun

Member

Yo

Member

sonny

Member

Yo

Member

biohazardman

Member

PlinkForFun

Member

Yo

Member

Eaglebeak

Member

PlinkForFun

Member