WTS FX STX Barrels for SPA P12 .22

Forums Member Classifieds WTS FX STX Barrels for SPA P12 .22

  • Views : 695
  • Link

    OscarDawg
    Participant
    Member

    500mm Barrel with FX STX .22 pellet A-liner  *SOLD*

    600mm Barrel with FX STX .22 slug liner

    These are 2 barrels I made for my P12 using FX barrel liners, carbon fiber tubes, and a little machining. They are very accurate and shave quite a bit of weight off of the rifle. You will need to have your P12 shooting at least 40fpe to make accurate use of the slug barrel. The slug barrel also shoots pellets as well as the pellet liner from my experience. I am selling the barrels because I am planning to sell the gun. Barrels are $170 each shipped to cont. US. Not trying to make any money as the price is what it cost me to make. I take paypal.

    Link

    leadslinger
    Participant
    Member

    How does this barrel compare accuracy wise to an FX rifle using the STX liner? Why not sell the barrels with the rifle? How much weight does the barrel save?

     

    Link

    OscarDawg
    Participant
    Member

    Accuracy is the same as the FX rifles. It is currently out grouping my 30 cal impact at 50 yards. I may sell at least one of the barrels with the gun if I havent already sold them by then. There is no point in having both barrels since they both shoot pellets great. The factory barrel is 1lb 4oz, the 500mm STX barrel is 7oz and the 600mm STX barrel is 8.5oz. So you will almost save a pound of weight. It feels like a different gun with this barrel. Keep in mind I used my little shipping scales to weigh everything so the weights might not be exact.

    Link

    leadslinger
    Participant
    Member

    Wow, thats a lot less weight. If I decide to go with the slug liner, What setup did you have to get 40 FPE out of your P12? I have a regulator in mine. I think it is set to about 130 bar. 

    Mod edit: This is turning into a conversation. Move it to the PM system. 

    Link

    OscarDawg
    Participant
    Member

    I have a huma reg that i set to 150bar and used a little stronger hammer spring. It pushed the 23gr neilson slugs to 915fps. The extra barrel length helps more than anything.

    Link

    leadslinger
    Participant
    Member

    I sent you a PM.

    Link

    darkcharisma
    Participant
    Member

    still got the slug liner? let me know in pm if it can be adapted for other guns use than the p12

Viewing 7 posts - 1 through 7 (of 7 total)

The topic ‘WTS FX STX Barrels for SPA P12 .22’ is closed to new replies.