Winchester 425 Trigger ?

MDriskill On my mine. I can rock back the sear and it exposes the pin for the trigger. 
Now that I see exactly how the whole gun functions. I’m going to use this trigger. It really does nothing except provide the first stage pull. I probably paid fair market value (or a little more ). So at this point I don’t think spending the money on original trigger parts will increase the value of the rifle or make it shoot any better. 

I have not lost hope in this project yet. Doing some simple math. I determined a .030” shim on both sides of the trigger will center the trigger and leave about .008” of side to side play. So the trigger should still pivot to have the first stage feel. 
I found steel banding that is .020” thick and brass shim stock at .010” thick. So with a little drilling , sniping , grinding and polishing. I made a set of shims. 
.
.
.
.
.
.

My spring compressor. Made it with just stuff I had around the shop. 
.

It lives Again! Got it all back together. And it works to ! One ragged hole. That’s about 10 shots at ten yards. 
.

.

Big thanks to MDriskill for the technical and moral support