wildcat moderator

Forums PCP Airguns wildcat moderator

  • Views : 1607
  • Link

    Tobbe77
    Participant
    Member

    What moderators fits om Fx wildcat mk2? End cap on the wildcat have a male m20x1 thread.

    Link

    Cranky1
    Participant
    Member

    Donnyfl 

    Link

    n2stuff
    Participant
    Member

    Yup, Donnyfl will fix you right up and he has very fast shipping too.

    FX Impact/Wildcat 1/2 x 20 UNF Adapter Matte finish with thread protector #A2

    Link

    Rizen1
    Participant
    Member

    I have the Donny fl Ronin on my compact and I absolutely love it! It is super QUIET!

    Link

    Cranky1
    Participant
    Member

    I’ve got a sumo on my streamline. I love how quiet the gun is. 

    Link

    likkitysplyt
    Participant
    Member

    That’s a Sumo on my Wildcat

    Link

    Hookster
    Participant
    Member

    Or go with the Koi and you don’t need an adapter. He offers it with 20mm threads. Great Mod, love mine. Buddy has one too and loves it. 

    Link

    Droptine26
    Participant
    Member


    I’ve got the DonnyFL Tanto on mine and all you hear is the hammer strike on the valve, then the ting of lead on steel. Super mod and it looks great on the WC.

    Link

    rwsmike
    Participant
    Member

    That Tanto does look awesome 

    Link

    Bob_O
    Participant
    Member

    “Hookster”Or go with the Koi and you don’t need an adapter. He offers it with 20mm threads. Great Mod, love mine. Buddy has one too and loves it. 

    
Correct!!  Same with the Tanto, they can attach directly to the shroud with the proper end cap.  I use them on my WC25 MKII.  

    If you want to use the larger 1.6″ or 2″ diameter ones like the Sumo or Ronin, you’ll need the adapter.

    FULL DISCLOSURE

    Due to variances in manufacture/build between one FX Wildcat and the next, the 1.2″ diameter of the KOI and Tanto might rub the fill port dust cover like on my rifle.  There are some WC owners who fit the KOI directly to the shroud with no clearance issues at all.

    I had to mod my fill port cover so I could run the KOI directly off the shroud without interference.  The advantage of running directly off the shroud is it saves weight and shortens overall length.

    Here’s a pic of my fill port cover.  I took it to a local machine shop and they milled a flat spot as you see here.  Now the only time it touches is when I am filling the cylinder.

    Here is how it looks in place:

    Link

    Hookster
    Participant
    Member

    Haven’t seen any rub with either MarkII in .22 or the Compact when using the Koi. Don’t know about other DonnyFL models directly attached to shroud. 

    Link

    Bob_O
    Participant
    Member

    There is only a chance of rubbing if the end of the barrel is rearward of the air cylinder.  A compact should never have those clearance issues.

    Link

    Deleted Account
    Link

    Revoman
    Participant
    Member

    Hmmmm….my Wildcat does not have a .5″ thread, it has a finer, male thread.  I had ordered through Krale and the order showed that it was for a Wildcat, problem was that apparently the Wildcats there have female threads, so when I received mine, no workie.  I contacted Krale and they made it right, but I had to buy another adapter at $30 more to get it here.
    Be careful when ordering this from Krale to make certain that the thread is correct.

    Link

    Deleted Account

    The confusion arises from the fact that the 22 caliber Wildcat and the 25 caliber Wildcat are different where the moderator attaches they require different adapters… it makes no sense to me why one would be set up one way and the other completely different… but that’s a question for FX I suppose.

    Link

    Revoman
    Participant
    Member

    Aha, that clears it up CHUCK (no pun, upchuck?), thank you for that insight.

    Link

    Barkley9
    Participant
    Member

    I put a Huggett on mine. In my opinion, it works better than the FX sections. I had to get the adapter from DonnyFL. If I hadn’t already had the Huggett I would have gone with the Sumo.

    Link

    Bob_O
    Participant
    Member

    Looks very nice!! 🙂

    Link

    Fabius
    Participant
    Member

    Hello guys! Need help. I have an fx wildcat mk1 .22 with the longer shroud. Do i need shroud adapter to fix Tanto moderator or will the Tanto with an M20 rear cap do the job?

    Link

    Kerbow01
    Participant
    Member

    Just put a Hugget Atom on my mk1 .25 Wildcat. At 2.5” i love the short length, it still keeps the gun very truck friendly for when I’m at the farm. My dad borrowed my truck yesterday and used the gun to shoot at a pigeon, after not knowing the holdover and missing twice, he laid it down and called me to tell me my gun was out of air lol. It’s really THAT quiet! After proving to him it was fine, he couldn’t believe how much quieter the gun is now! I can’t really speak for donnyFL as i haven’t tried one, but that hugget is MEAN!

Viewing 20 posts - 1 through 20 (of 20 total)

You must be logged in to reply to this topic.