:)

Looks like a warranty issue to me. Time for Ernest to work his magic and redesign this part!

That tip is going to fail. Looks like a new design is in order.

I’m hand in hand with Chuck’s train of thought and discovery. After much observation one would think more “meat” at the end of the probe would cause more “meat” hanging out in the way of the magazine sliding in, as if the newly designed probe may be too long that it now protrudes into the magazine well when the cocking latch is fully cocked back, but I checked it today, and with the cocking latch all the way back there is room for added “meat” to the end, and if anything, it would then flush out with the rear port of the probe. Seems like someone didn’t do their math too well, and instead of hitting the addition button hit the subtraction button instead.

I know for a fact on the marauder Rifles, one has to not only slide the cocking bolt back, but pull and hold back while slipping in the magazine. That’s okay with me, in exchange for a stouter wildcat probe at the end.

I know for a fact on the marauder Rifles, one has to not only slide the cocking bolt back, but pull and hold back while slipping in the magazine. That’s okay with me, in exchange for a stouter wildcat probe at the end.

Click to expand...

Not on my Marauders!