Hi,
If you feel like you need to get creative you can start with these:
Wildcat cheek piece
1. Grab a branch (I used pine)
2. Cut it to lenght (give some extra to sand the ends)
3. Use a knife to cut to preferred size and form. Sharp enough blade will leave nothing to sand off and I prefer the this feel over the sanded one. Mine is still in progress.
Point: Feels very good, smells awesome and with this you can get that perfect cheek-weld even with the high No-Limit mounts!
Picatinny bipod rail: (EXPERIMENTAL)
1. Take some hardwood and cut to size (leave some extra for sanding and more robustness) ..I do not think pine will hold together. A piece with a twig is strong and recommended but will need some more work.
2. Carve Picatinny form to the wood and carve some wood of the gun stock side to begin a round shape
3. Place sand paper to Wildcat stock (sand side AWAY from the stock) and start sanding the piece to form against the stock. Ready in no-time.
4. Use double side to attach it
Point:
Are there no BT-15s available in your country? No worries!
It also looks awesome when sanded properly!!
If you feel like you need to get creative you can start with these:
Wildcat cheek piece
1. Grab a branch (I used pine)
2. Cut it to lenght (give some extra to sand the ends)
3. Use a knife to cut to preferred size and form. Sharp enough blade will leave nothing to sand off and I prefer the this feel over the sanded one. Mine is still in progress.
Point: Feels very good, smells awesome and with this you can get that perfect cheek-weld even with the high No-Limit mounts!
Picatinny bipod rail: (EXPERIMENTAL)
1. Take some hardwood and cut to size (leave some extra for sanding and more robustness) ..I do not think pine will hold together. A piece with a twig is strong and recommended but will need some more work.
2. Carve Picatinny form to the wood and carve some wood of the gun stock side to begin a round shape
3. Place sand paper to Wildcat stock (sand side AWAY from the stock) and start sanding the piece to form against the stock. Ready in no-time.
4. Use double side to attach it
Point:
Are there no BT-15s available in your country? No worries!
It also looks awesome when sanded properly!!